Concrete
Concrete
Everlastic® Backer Rod
Standard, Hot Rod & Soft Type Backer Rod for Concrete Joint Sealants
Williams Products supplies Armacell backer rod for concrete expansion joints, contraction joints, pavement joints, precast concrete, parking structures, and other construction sealant applications.
Available in Standard, Hot Rod XL, and Soft Type, our backer rod options provide contractors with the proper backing material to control sealant depth, reduce unnecessary sealant consumption, and promote proper joint sealant performance.
Whether your application requires a traditional closed-cell backer rod, a high-temperature material for hot-pour sealants, or a highly compressible material for irregular joints, Williams Products can provide the right backer rod for the job.
An Important Part of a Properly Designed Sealant Joint
Backer rod does much more than simply fill empty space beneath a sealant.
When properly sized and installed, backer rod helps:
- Control sealant depth
- Reduce unnecessary sealant consumption
- Provide a consistent backing surface
- Create a bond breaker between the sealant and bottom of the joint
- Help prevent three-sided sealant adhesion
- Promote proper sealant joint geometry
- Allow the sealant to expand and contract as the concrete joint moves
- Improve overall joint sealant performance
Preventing three-sided adhesion is especially important. A properly installed backer rod allows the sealant to bond primarily to the two opposing sides of the joint rather than bonding to the bottom, helping the sealant stretch and compress as joint movement occurs.
Three Backer Rod Options for Concrete Construction
Williams Products offers Standard, Hot Rod XL, and Soft Type Backer Rod, allowing contractors to select the appropriate material based on the joint configuration and sealant being used.
Standard Backer Rod
Closed-Cell Polyethylene for Cold-Applied Sealants
Standard Backer Rod is a flexible, closed-cell polyethylene foam designed for use as a backing material behind cold-applied joint sealants.
Its closed-cell construction provides a non-absorbent, moisture-resistant backing material that is flexible and compressible for easy installation.
Standard Backer Rod is an excellent general-purpose choice for concrete construction applications including:
- Concrete expansion joints
- Contraction joints
- Pavement joints
- Precast concrete joints
- Parking structures
- Concrete repairs
- Copings
- Building construction
- Window and door perimeter joints
- Curtain wall joints
ASTM Classifications
Our Standard Backer Rod is manufactured to meet:
ASTM C1330 Type C
ASTM D5249 Type 3
These classifications make Standard Backer Rod an excellent option for specified construction applications requiring a closed-cell polyethylene backup material.
Hot Rod XL Backer Rod
High-Temperature Backer Rod for Hot-Pour Concrete Joint Sealants
Hot Rod XL is a crosslinked, closed-cell polyethylene backer rod specifically designed for applications involving hot-pour joint sealants.
This makes Hot Rod particularly important for concrete pavement and transportation applications where hot-applied sealants are used to seal contraction and expansion joints.
Typical applications include:
- Concrete highways
- Concrete pavement
- Airport runways
- Parking lots
- Driveways
- Transportation infrastructure
- Expansion joints
- Contraction joints
- Hot-pour pavement sealant applications
Hot Rod XL provides a non-absorbent backing material that helps control sealant depth while tolerating the elevated temperatures associated with hot-pour sealant installation.
High-Temperature Performance
Hot Rod XL is manufactured from crosslinked closed-cell polyethylene and is specifically engineered for high-temperature applications.
It is compatible with many rubber-asphalt and coal-tar/rubber polymer thermoplastic compounds commonly used for pavement joint sealing.
ASTM Classification
Our Hot Rod XL is classified as:
ASTM D5249 Type 1
Hot Rod XL is the preferred choice among the three products when the application involves a hot-pour joint sealant.
Soft Type Backer Rod
Highly Compressible Backer Rod for Irregular Concrete Joints
Not every concrete joint is straight, uniform, or consistent in width.
Soft Type Backer Rod is a highly compressible, bi-cellular polyethylene foam designed to conform more easily to irregular joints and openings.
Its unique construction combines high compressibility with a moisture-resistant outer skin, making it an excellent choice for concrete joints where standard closed-cell backer rod may be difficult to install.
Soft Type is particularly useful with self-leveling and flowable sealants and in applications where sealant bubbling or outgassing is a concern.
Typical applications include:
- Irregular concrete joints
- Expansion and contraction joints
- Parking structures
- Concrete floors
- Precast concrete
- Bridge construction
- Concrete rehabilitation
- Wide or inconsistent joint openings
- Joints using self-leveling sealants
- Applications where easier compression is desired
ASTM Classifications
Our Soft Type Backer Rod is classified as:
ASTM C1330 Type B
ASTM D5249 Type 3
Soft Type provides an excellent alternative when the joint configuration makes traditional closed-cell backer rod difficult to install.
Which Backer Rod Should I Use?
STANDARD
Best for: General concrete construction and cold-applied sealants
Material: Closed-cell polyethylene
Choose Standard when: You have a relatively uniform concrete joint and are using a compatible cold-applied sealant.
HOT ROD XL
Best for: Concrete pavement and hot-pour sealants
Material: Crosslinked closed-cell polyethylene
Choose Hot Rod when: Elevated temperatures from hot-pour sealant installation require a high-temperature backing material.
SOFT TYPE
Best for: Irregular joints and self-leveling sealants
Material: Bi-cellular polyethylene
Choose Soft Type when: The joint is irregular, highly compressible material is preferred, or the application involves self-leveling or flowable sealants.
Concrete Applications
Williams Products Backer Rod is suited for a wide variety of concrete and construction applications, including:
- Concrete expansion joints
- Concrete contraction joints
- Saw-cut joints
- Highway and pavement joints
- Bridge construction
- Parking decks and parking structures
- Precast concrete joints
- Concrete floors and slabs
- Sidewalks
- Driveways
- Curbs and gutters
- Building perimeter joints
- Concrete repair and rehabilitation
- Airport pavement and runways
- Commercial and industrial concrete construction
Backer Rod Helps Control Sealant Depth
One of the most important functions of backer rod is establishing the proper depth of the joint sealant.
Without a backing material, contractors may use significantly more sealant than necessary while creating a joint geometry that may not allow the sealant to perform properly.
Installing the correctly sized backer rod at the specified depth creates a controlled reservoir for the sealant above it.
This can help reduce sealant consumption while promoting proper sealant geometry and joint performance.
Backer Rod as a Bond Breaker
Backer rod also serves as an important bond breaker within the sealant joint.
In a properly designed joint, sealant should generally adhere to the two opposing joint faces rather than the bottom of the joint.
Backer rod helps prevent this unwanted third point of adhesion, allowing the sealant to stretch and compress more effectively as the concrete joint opens and closes.
Proper Backer Rod Sizing
Correct sizing is critical to backer rod performance.
The backer rod should be selected based on the actual joint width and the recommendations of the sealant and backer rod manufacturer. Proper sizing helps keep the rod securely positioned at the required depth and provides a consistent surface for sealant installation.
Backer rod should be installed with a blunt tool or roller and should not be punctured, stretched, or excessively compressed during installation.
Always follow the project specifications and sealant manufacturer’s requirements for final joint dimensions and installation depth.
Williams Products supplies backer rod manufactured to specific specifications.
Our Backer Rod family provides contractors with multiple backer rod technologies for different joint and sealant conditions:
Standard — Closed-Cell Polyethylene
ASTM C1330 Type C | ASTM D5249 Type 3
Hot Rod XL — Crosslinked Closed-Cell Polyethylene
ASTM D5249 Type 1
Soft Type — Bi-Cellular Polyethylene
ASTM C1330 Type B | ASTM D5249 Type 3
This range allows contractors, distributors, and specifiers to select a backing material suited to the specific concrete joint and sealant system.
Industries & Markets Served
Concrete Construction | Road & Highway Construction | Bridge Construction | Precast Concrete | Parking Structures | Commercial Construction | Airport Construction | Municipal Construction | Concrete Repair & Rehabilitation
Why Buy Backer Rod from Williams Products?
Williams Products specializes in supplying foam, rubber, expansion joint, bearing pad, and joint-sealing materials to the concrete construction industry.
Our backer rod offering complements our complete line of concrete joint products, allowing contractors and distributors to source multiple joint materials from a supplier that understands concrete construction.
Whether you need Standard Backer Rod for general concrete joints, Hot Rod XL for hotpour pavement sealants, or Soft Type for irregular and demanding joints, Williams Products can help you select the appropriate product and size.
Material selection should be based on the applicable project plans, engineering requirements, load conditions, environmental exposure, and intended application. MIL-C-882 and AASHTO references should be verified against the current project specification before material is supplied or installed.
Sectors
Information
Tech data/spec sheet
Safety data sheet
Cut sheet
Contact us
Need Everlastic® Backer Rod?
Contact Williams Products for pricing, availability, specifications, and custom fabrication options.
Send us a message
"*" indicates required fields