Masonry
Masonry
Everlastic® NN2
ASTM D1056 2A2 Closed-Cell Neoprene Sponge for Masonry Construction
EVERLASTIC® NN2 from Williams Products is a durable, closed-cell neoprene sponge meeting ASTM D1056 2A2, designed for sealing, cushioning, isolation, and joint applications throughout brick, block, stone, and masonry construction.
NN2 provides a firmer, more compression-resistant cellular material for applications where greater support is desired while still maintaining the flexibility and resilience of closed-cell neoprene sponge.
For faster and easier installation, EVERLASTIC® NN2 can also be supplied with PressureSensitive Adhesive (PSA) and fabricated into strips, pads, gaskets, and custom components.
ASTM D1056 2A2 Closed-Cell Neoprene Sponge
EVERLASTIC® NN2 meets ASTM D1056 2A2, providing contractors, architects, engineers, and distributors with a specification-grade cellular neoprene material for demanding masonry and building construction applications.
The closed-cell construction combines compressibility, resilience, moisture resistance, and durability, making NN2 particularly useful where the material will be incorporated between masonry, concrete, precast, or other building components.
Key Features & Benefits
- Meets ASTM D1056 2A2
- Closed-cell neoprene sponge
- Firmer than softer cellular sponge grades
- Good compression resistance
- Flexible and resilient
- Low water absorption
- Helps accommodate movement between adjoining materials
- Provides cushioning and separation
- Suitable for interior and exterior masonry construction
- Easily fabricated into strips, pads, and gaskets
- Available in custom thicknesses, widths, and lengths
- Available with optional Pressure-Sensitive Adhesive (PSA)
A Firmer Closed-Cell Sponge for Masonry Applications
Not every masonry joint requires the same degree of compressibility.
For applications where a firmer cellular material and greater resistance to compression are desirable, EVERLASTIC® NN2 provides an excellent alternative to softer sponge grades.
NN2 maintains the flexibility necessary to conform to adjoining surfaces while providing additional support in applications involving masonry, structural concrete, precast components, and other building materials.
This makes NN2 especially useful for fabricated pads, spacers, separators, gaskets, and joint components where both cushioning and support are required.
Masonry Control Joint Applications
Concrete masonry walls naturally experience movement caused by drying shrinkage, temperature changes, moisture conditions, and normal building movement.
Properly designed control joints provide predetermined locations where this movement can occur.
EVERLASTIC® NN2 can be fabricated into strips and components for use in masonry control-joint assemblies, providing a resilient cellular material within the joint.
Typical applications include:
- CMU control joints
- Concrete block walls
- Vertical masonry joints
- Exterior masonry walls
- Interior masonry walls
- Commercial construction
- Industrial masonry construction
Brick & Masonry Expansion Joints
Brick, block, stone, and other masonry systems may require separation between adjoining sections or dissimilar building materials.
EVERLASTIC® NN2 provides a compressible closed-cell separation material that can be fabricated specifically for these joint conditions.
Applications can include:
- Brick expansion joints
- Masonry expansion joints
- Brick-to-concrete interfaces
- Block-to-concrete interfaces
- Masonry-to-precast interfaces
- Wall transitions
- Building perimeter joints
- Vertical and horizontal separation joints
- Joints between dissimilar construction materials
Masonry-to-Concrete Separation
Masonry walls frequently intersect with concrete structural components.
These interfaces can experience differential movement as the building responds to loading, temperature, moisture, and other environmental conditions.
EVERLASTIC® NN2 can provide a resilient separation and cushioning layer between masonry and concrete components.
Typical locations include interfaces with:
- Concrete columns
- Concrete walls
- Foundations
- Structural slabs
- Concrete beams
- Precast concrete
- Other structural components
The firmer nature of NN2 makes it particularly useful where greater support is desired while maintaining a compressible separation layer.
Closed-Cell Performance for Exterior Masonry
Materials incorporated into exterior masonry assemblies can be exposed to rain, humidity, temperature changes, and other environmental conditions.
The closed-cell construction of EVERLASTIC® NN2 helps limit water absorption while maintaining the flexibility and resilience needed for construction joint applications.
This combination makes NN2 well suited for both interior and exterior masonry construction.
Available with Pressure-Sensitive Adhesive (PSA)
For faster and easier installation, Williams Products can supply EVERLASTIC® NN2 with optional Pressure-Sensitive Adhesive (PSA).
PSA backing can help hold the material in position during installation, particularly in vertical or difficult-to-access applications.
Simply remove the release liner and position the fabricated NN2 component against the compatible surface.
PSA can be particularly useful for:
- Vertical masonry joints
- Masonry-to-concrete interfaces
- Precast-to-masonry interfaces
- Window and door openings
- Gaskets and fabricated pads
- Field installation
- Factory assembly
- Applications where material must remain positioned during construction
The PSA is primarily intended as an installation aid and should not replace structural or mechanical attachment where required by the application.
Window, Door & Building Openings
Masonry openings create transitions between brick or block and other building materials.
EVERLASTIC® NN2 can be fabricated into strips, pads, and gaskets for use around:
- Windows
- Doors
- Louvers
- Wall penetrations
- Architectural components
- Precast components
- Building-envelope transitions
Optional PSA backing can make these custom-fabricated components easier to position during installation.
Pads, Spacers & Custom Masonry Components
Because NN2 provides a firmer cellular construction, the material is particularly useful for custom-fabricated components requiring cushioning combined with greater support.
Williams Products can fabricate NN2 into:
- Bearing and cushioning pads
- Spacers
- Separators
- Gaskets
- Continuous strips
- Sheets
- Die-cut components
- Custom shapes
- PSA-backed components
Custom Fabricated for Your Project
Williams Products specializes in converting cellular rubber and foam materials for the construction industry.
Rather than requiring contractors and manufacturers to cut material in the field, EVERLASTIC® NN2 can be supplied to the thickness, width, length, and configuration required for the application.
Whether you need continuous strips for a masonry joint or thousands of identical fabricated pads, Williams Products can provide NN2 ready for installation.
Typical Masonry Applications
EVERLASTIC® NN2 can be used for a wide range of masonry construction applications, including:
- Masonry control joints
- CMU control joints
- Brick expansion joints
- Masonry expansion joints
- Building perimeter joints
- Brick-to-concrete separation
- Block-to-concrete separation
- Masonry-to-precast interfaces
- Window and door openings
- Architectural masonry
- Stone construction
- Building-envelope transitions
- Custom gaskets
- Cushioned spacers and separators
- Fabricated construction pads
Industries & Markets Served
Masonry Construction | Brick Construction | Concrete Masonry | Commercial Construction | Building Envelope | Architectural Masonry | Precast Construction | Industrial Construction
Why Choose EVERLASTIC® NN2?
EVERLASTIC® NN2 combines the performance of ASTM D1056 2A2 closed-cell neoprene sponge with Williams Products’ custom fabrication capabilities.
For applications requiring more support than softer sponge grades, NN2 provides an excellent combination of:
Firmness | Compression Resistance | Resilience | Moisture Resistance | Cushioning | Separation | Custom Fabrication
Williams Products can provide NN2 in standard material form or fabricate it into ready-to-install strips, pads, gaskets, spacers, and optional PSA-backed components.
Product selection should be based on project requirements, design conditions, environmental exposure, and applicable project specifications. ASTM D1056 classification does not by itself indicate suitability for every application.
Sectors
Information
Tech data/spec sheet
Safety data sheet
Cut sheet
Contact us
Need Everlastic® NN2 for Your Project?
Williams Products provides quality cellular rubber materials and custom fabrication for concrete and construction applications. Contact us for pricing, availability, and custom fabrication options.
Send us a message
"*" indicates required fields