Williams Products

Precast

Precast

EVERLASTIC® ISOVIBE – Polyethylene Foam Joint Filler, Backer Material & Bond Breaker

2.2 LB Closed-Cell Polyethylene Foam Plank | Precast Concrete Expansion Joints | Bond Breaking | Joint Backing & Isolation

Versatile Polyethylene Foam for Precast Concrete Joint Applications

Williams Products’ EVERLASTIC® ISOVIBE is a lightweight, 2.2 lb/ft³ density closed-cell polyethylene foam plank material, available in sheets for precast concrete, concrete construction, and infrastructure applications.

Designed for use as a joint filler, backer material, bond breaker, and separation material, EVERLASTIC® ISOVIBE provides a flexible and economical solution for applications requiring compressibility, moisture resistance, and separation between adjoining concrete components.

Precast concrete structures frequently incorporate expansion joints, isolation joints, and construction joints to accommodate movement and prevent unwanted bonding between adjacent surfaces.

EVERLASTIC® ISOVIBE can be fabricated into strips, sheets, and custom shapes to fill joint spaces, provide backing for sealants, and create bond-breaking interfaces in properly designed concrete assemblies.

Its closed-cell polyethylene construction provides lightweight handling, flexibility, and resistance to moisture absorption.

Available in sheets or custom-fabricated strips, EVERLASTIC® ISOVIBE helps precast concrete manufacturers and contractors address a wide range of joint filling, backing, and bond-breaking requirements.

Key Features & Benefits

  • 2.2 LB Density: Lightweight polyethylene foam with a nominal density of 2.2 pounds per cubic foot.
  • Closed-Cell Construction: Provides a resilient foam structure with useful resistance to moisture absorption.
  • Expansion Joint Filler: Fills designated joint spaces while accommodating movement through compression.
  • Bond Breaker: Helps prevent unwanted adhesion between adjoining concrete surfaces or between sealants and designated backing surfaces.
  • Joint Backer Material: Provides backing and depth control for compatible joint sealant systems.
  • Compressible & Flexible: Accommodates movement and minor dimensional variations in appropriately designed joints.
  • Nonabsorptive Characteristics: Closed-cell polyethylene resists water absorption compared with many open-cell foam materials.
  • Lightweight & Easy to Handle: Convenient for precast manufacturing and field installation.
  • Available in Sheets: Can be used as full sheets or fabricated into custom widths, thicknesses, and lengths.
  • Custom Fabrication: Williams Products can supply cut strips, sheets, and specialty configurations.

Typical Precast Concrete Applications

1. Precast Concrete Expansion Joint Filler

Expansion joints are incorporated into concrete structures to accommodate movement caused by temperature changes and other service conditions.

EVERLASTIC® ISOVIBE can be used as a compressible filler in properly designed expansion joints where its physical properties meet the project requirements.

Typical applications include:

  • Precast concrete expansion joints
  • Concrete-to-concrete movement joints
  • Precast wall panel expansion joints
  • Concrete slab perimeter joints
  • Precast-to-cast-in-place concrete interfaces
  • Specialty precast expansion joint assemblies

The foam occupies the designated joint space while allowing movement through compression.

2. Joint Backer Material for Sealant Applications

Concrete joints frequently incorporate sealants to help prevent moisture and debris from entering the joint.

Proper sealant installation requires the correct joint geometry and backing material.

EVERLASTIC® ISOVIBE can be fabricated into strips for use as backing in compatible sealant systems.

Potential applications include:

  • Precast concrete panel joints
  • Horizontal concrete joints
  • Vertical wall panel joints
  • Concrete expansion joint sealant backing
  • Architectural precast joint systems
  • Specialty concrete sealing assemblies

The foam helps fill the space behind the sealant and can assist with controlling sealant depth.

Its polyethylene surface can also serve as a bond-breaking interface in suitable sealant systems, helping prevent undesirable three-sided adhesion.

Important: Sealant compatibility, backing dimensions, installation compression, and the required joint profile must be verified. ISOVIBE should not be assumed interchangeable with conventional round backer rod in every joint design.

3. Bond Breaker Between Precast Concrete Components

Bond breakers are used in concrete construction to prevent unwanted adhesion between adjoining surfaces.

EVERLASTIC® ISOVIBE provides a polyethylene foam separation layer that can help prevent direct bonding between adjacent concrete components.

Typical applications include:

  • Precast concrete panel interfaces
  • Concrete-to-concrete separation
  • Precast-to-cast-in-place concrete connections
  • Construction joint separation
  • Architectural precast assemblies
  • Specialty concrete isolation details

The foam creates a physical separation layer between surfaces that are not intended to bond.

4. Precast Concrete Wall Panel Joints

Precast concrete wall panels frequently incorporate vertical and horizontal joints that must accommodate movement and provide space for joint sealing systems.

EVERLASTIC® ISOVIBE can be fabricated into custom strips for:

  • Vertical precast wall panel joints
  • Horizontal panel-to-panel joints
  • Architectural precast concrete joints
  • Concrete façade movement joints
  • Precast panel perimeter joints
  • Specialty wall panel joint details

The material can serve as a compressible filler, backing material, or bond-breaking component depending on the joint design.

5. Precast Concrete Isolation Joints

Isolation joints separate concrete components from adjoining structures to allow independent movement and reduce restraint.

EVERLASTIC® ISOVIBE can provide a compressible separation material in suitable applications.

Typical uses include:

  • Concrete slab-to-wall isolation joints
  • Concrete-to-column isolation joints
  • Precast panel perimeter separation
  • Concrete-to-foundation interfaces
  • Concrete equipment enclosure separation
  • Specialty structural isolation joints

The foam provides a physical separation layer that helps maintain the intended joint space.

6. Precast Utility Vaults & Underground Structures

Precast utility vaults and underground concrete structures may incorporate compressible fillers or bond-breaking materials at designated construction joints.

Potential applications include:

  • Utility vault component separation
  • Precast enclosure joints
  • Concrete access structure interfaces
  • Specialty underground concrete joints
  • Joint backing for compatible sealant systems
  • Precast infrastructure assemblies

Where joints must be watertight, the complete sealing system must meet the applicable project requirements. ISOVIBE is not a substitute for a specified waterstop or gasket.

7. Precast Concrete Highway & Infrastructure Construction

Transportation and infrastructure projects frequently incorporate expansion joints, isolation joints, and construction joints.

EVERLASTIC® ISOVIBE may be considered for:

  • Precast highway concrete expansion joints
  • Concrete pavement isolation joints
  • Precast drainage structure separation
  • Concrete-to-structure movement joints
    • Infrastructure joint backing
  • Specialty concrete bond-breaking applications

Use in specification-controlled projects depends on the required material properties and applicable agency standards.

EVERLASTIC® ISOVIBE as a Bond Breaker

Preventing Unwanted Adhesion in Concrete Construction

Bond-breaking materials are used when adjoining surfaces must remain separated or move independently.

EVERLASTIC® ISOVIBE provides a flexible polyethylene foam layer that can act as a physical bond breaker in appropriately designed assemblies.

Concrete-to-Concrete Bond Breaking

The material helps prevent direct bonding between adjoining concrete surfaces when installed as a continuous separation layer.

Precast-to-Cast-in-Place Separation

ISOVIBE can be used at designated interfaces where precast concrete and cast-in-place concrete must remain separated.

Sealant Bond Breaking

When used as compatible joint backing, polyethylene foam can help prevent sealant adhesion to the back of the joint.

This supports proper sealant movement by helping avoid three-sided adhesion.

Expansion Joint Separation

The foam fills the joint space while maintaining separation between adjacent concrete elements.

Custom Bond-Breaking Strips

Williams Products can fabricate ISOVIBE into custom widths and thicknesses for specific construction joint details.

EVERLASTIC® ISOVIBE as a Joint Backer Material

Supporting Proper Sealant Joint Design

Sealant joints must be properly designed to accommodate movement and maintain the intended sealant profile.

Backing materials are frequently installed behind sealants to control the sealant depth and prevent unwanted adhesion to the bottom of the joint.

EVERLASTIC® ISOVIBE can be used as a fabricated backer material where its shape, density, compression characteristics, and compatibility meet the sealant manufacturer’s requirements.

Benefits include:

  • Filling excess joint depth
  • Providing backing for compatible sealants
  • Helping establish the specified sealant profile
  • Creating a potential bond-breaking surface
  • Reducing unnecessary sealant consumption
  • Allowing custom backing dimensions for specialty precast joints

For conventional narrow joints, round backer rod may be more appropriate. ISOVIBE is particularly useful to evaluate where sheet or rectangular backing material is required.

Why Polyethylene Foam Is Important in Precast Concrete Joints

Precast concrete structures experience movement caused by temperature changes, shrinkage, loading, and other environmental conditions.

Properly designed joints help accommodate these movements while protecting the surrounding concrete.

EVERLASTIC® ISOVIBE provides a flexible material for joint filling, backing, and separation.

Compressibility

The foam can compress as adjoining concrete components move toward one another.

Bond Breaking

Polyethylene foam can provide a physical separation layer that helps prevent unwanted adhesion.

Joint Depth Control

Custom-fabricated backing strips can help establish the required sealant depth in suitable joint systems.

Moisture Resistance

Closed-cell polyethylene foam offers useful resistance to water absorption.

Lightweight Installation

The 2.2 lb/ft³ material is lightweight and easy to handle during manufacturing and field installation.

Custom Fabrication

Sheet material can be converted into strips, fillers, and specialty shapes to accommodate different joint configurations.

Common Uses of EVERLASTIC® ISOVIBE

Application Function

Precast Concrete Expansion Joints Compressible Joint Filler

Precast Wall Panel Joints Joint Backing & Separation

Concrete-to-Concrete Interfaces Physical Bond Breaker

Precast-to-Cast-in-Place Interfaces Separation Material

Concrete Isolation Joints Compressible Filler

Sealant Joint Assemblies Backing & Bond-Breaking Surface

Utility Vault Construction Joint Filler & Separation

Architectural Precast Construction Custom Joint Backing & Filler

Highway Concrete Construction Joint Filler Where Specified

Material Specifications

Property Specification

Product Name EVERLASTIC® ISOVIB

Material Polyethylene Foam

Material Form Foam Plank / Sheet

Nominal Density 2.2 lb/ft³

Approximate Metric Density 35 kg/m³

Cell Structure Closed-Cell

Primary Functions Joint Filler, Backer Material, Bond Breaker & Separation

Available Forms Sheets & Custom-Fabricated Strips

Fabrication Options Sheets, Strips, Blocks & Specialty Shapes

Primary Market Precast Concrete Construction

Additional Markets Concrete, Masonry & Infrastructure Construction

Specific sheet sizes, thicknesses, compression-deflection properties, compression recovery, water absorption, and applicable material standards should be confirmed using the current EVERLASTIC® ISOVIBE technical data sheet.

Custom Fabrication for Precast Concrete Manufacturers

At Williams Products, we understand that precast concrete manufacturers require consistent dimensions, dependable materials, and products ready for production or installation.

We offer EVERLASTIC® ISOVIBE in sheet form and custom-fabricated configurations, including:

  • Full polyethylene foam sheets
  • Custom-width expansion joint filler strips
  • Precut joint backing strips
  • Bond-breaking sheets and strips
  • Concrete isolation joint fillers
  • Specialty joint shapes
  • Project-specific widths and lengths
  • Custom thicknesses, subject to availability
  • Production quantities for precast manufacturers

Our fabrication capabilities help manufacturers reduce cutting and preparation time while maintaining consistent material dimensions.

Whether you require full sheets for in-house fabrication or custom-cut joint materials ready for installation, Williams Products can assist with your requirements.

Material selection should be based on the applicable project plans, engineering requirements, load conditions, environmental exposure, and intended application. MIL-C882 and AASHTO references should be verified against the current project specification before material is supplied or installed.

Sectors

Information

Contact us

Need Everlastic® Iso-Vibe?

Contact Williams Products for pricing, availability, specifications, and custom fabrication options.

Send us a message

"*" indicates required fields