Precast
Precast
EVERLASTIC® NN2 – ASTM D1056 2A2 Closed Cell Neoprene Sponge
High-Performance Closed Cell Neoprene Sponge for Precast Concrete Construction
Reliable Sealing, Cushioning & Joint Isolation for Precast Concrete Applications
Williams Products’ EVERLASTIC® NN2 is a medium-soft closed cell neoprene sponge rubber designed to meet ASTM D1056 2A2 material requirements. Engineered for applications requiring flexibility, controlled compression, resilience, and resistance to moisture, NN2 provides an effective solution for cushioning, isolation, and joint protection in precast concrete construction.
Offering greater compression resistance than softer ASTM D1056 2A1 materials,
EVERLASTIC® NN2 provides an excellent balance of compressibility and firmness for precast concrete applications where a soft sponge may compress more than desired.
From precast wall panels and box culverts to utility vaults, sound walls, and architectural concrete components, NN2 offers dependable cushioning and separation in applications where controlled compression, dimensional tolerances, and long-term material durability are important.
Available in custom-cut strips, pads, sheets, and fabricated configurations, EVERLASTIC®
NN2 can be supplied to meet the specific dimensional requirements of precast concrete manufacturers, contractors, and construction projects.
Key Features & Benefits
- ASTM D1056 2A2 Classification: Provides medium-soft compression characteristics suitable for general-purpose cushioning and isolation applications.
- Closed Cell Construction: Helps resist moisture absorption and water penetration through the sponge material.
- Controlled Compressibility: Provides greater compression resistance than Grade 1 sponge while retaining flexibility.
- Excellent Resilience: Helps maintain separation between adjoining components while accommodating minor movement and dimensional variations.
- Neoprene Rubber Composition: Offers resistance to weathering, ozone, and environmental exposure.
- Vibration & Sound Dampening: Helps reduce vibration transmission and contact noise between adjoining concrete components.
- Durable Cushioning: Provides a compressible barrier that helps minimize direct concrete-to-concrete or concrete-to-steel contact.
- Custom Fabrication: Available in strips, pads, gaskets, and die-cut configurations to simplify installation and reduce material waste.
Typical Precast Concrete Applications
1. Precast Box Culverts & Drainage Structures
Precast box culverts and drainage structures require compressible materials capable of accommodating dimensional tolerances while providing cushioning and isolation between adjoining concrete sections.
EVERLASTIC® NN2 can be considered for applications where a medium-soft closed cell sponge material is specified.
Common applications include:
- Compressible joint fillers between precast sections
- Cushioning between adjoining concrete components
- Isolation strips at concrete contact points
- Secondary joint sealing components
- Compressible materials for drainage structure assemblies
- Joint cushioning at nonstructural interfaces
NN2’s medium-soft compression characteristics allow it to conform to variations in mating concrete surfaces while offering greater compression resistance than softer sponge grades.
Its closed cell construction also helps limit moisture absorption in applications exposed to damp or outdoor environments.
For PENNDOT box culverts or other DOT projects requiring approved ASTM D1056 2C2 sponge materials, Williams Products offers alternative products specifically intended for those requirements.
2. Precast Concrete Wall Panels
Precast concrete wall panels require appropriate cushioning and isolation materials to accommodate manufacturing tolerances, installation variations, and minor movement between components.
EVERLASTIC® NN2 provides a flexible, compressible barrier between adjoining panels.
Typical applications include:
- Vertical and horizontal panel joints
- Compressible isolation strips
- Perimeter cushioning around precast panels
- Separation material between adjoining concrete elements
- Concrete-to-steel contact cushioning
- Nonstructural joint protection
Its balanced compression characteristics help the material conform to irregular surfaces while providing sufficient resistance to compression for applications requiring a firmer material than Grade 1 sponge.
3. Architectural Precast Concrete
Architectural precast panels and decorative concrete components often require cushioning materials that help protect adjoining surfaces while maintaining consistent separation.
EVERLASTIC® NN2 can be incorporated into:
- Architectural wall panel joints
- Precast façade assemblies
- Decorative concrete elements
- Panel-to-panel contact locations
- Non-load-bearing isolation applications
- Concrete-to-metal interfaces
The material’s closed cell structure, flexibility, and controlled compression make it suitable for consideration in applications requiring durable cushioning and limited movement accommodation.
4. Precast Utility Vaults & Underground Structures
Precast utility vaults, electrical enclosures, telecommunications structures, and underground concrete assemblies frequently require compressible materials for cushioning and joint isolation.
Applications include:
- Utility vault section joints
- Concrete lid and cover cushioning
- Access panel isolation
- Non-pressure-rated gasket applications
- Isolation strips between precast components
- Cushioning at concrete-to-steel interfaces
EVERLASTIC® NN2 offers a combination of moisture resistance, flexibility, and mediumsoft compressibility that can be beneficial in utility and underground construction environments.
Its closed cell construction helps reduce moisture absorption, making it useful for consideration in applications exposed to damp conditions.
For joints requiring a watertight or pressure-rated seal, the complete joint design and sealing material must be evaluated separately.
5. Precast Sound Walls & Highway Barriers
Precast sound wall systems and highway barrier assemblies often incorporate compressible materials to accommodate dimensional tolerances, minimize direct contact, and help reduce vibration transmission.
EVERLASTIC® NN2 may be used for:
- Cushioning between precast sound wall panels
- Isolation between concrete components
- Compressible strips at panel interfaces
- Vibration and contact noise reduction
- Nonstructural joint protection
- Concrete-to-steel interface cushioning
Its medium-soft compression characteristics make it useful where a material must accommodate minor surface irregularities while providing greater resistance to compression than softer sponge grades.
Important: For PENNDOT sound walls or other DOT projects, Williams Products can assist in identifying materials that meet the applicable project specifications and approvedmaterial requirements.
6. Precast Concrete Buildings & Structural Assemblies
Precast building systems frequently require materials that provide separation, cushioning, and isolation between adjoining components.
EVERLASTIC® NN2 can be considered for:
- Precast panel separation joints
- Nonstructural isolation strips
- Concrete-to-steel contact cushioning
- Joint fillers between adjoining elements
- Compressible material around penetrations and openings
- Cushioning between non-load-bearing concrete components
Its medium-soft compression characteristics help maintain separation while allowing the material to accommodate minor movement and dimensional variations.
NN2 should not be used as a structural bearing pad unless specifically evaluated and approved for the required loading conditions.
7. Precast Wastewater Treatment & Industrial Concrete Structures
Precast wastewater treatment facilities and industrial concrete structures frequently incorporate compressible materials for cushioning, isolation, and nonstructural joint protection.
EVERLASTIC® NN2 may be considered for applications where moderate compression resistance and moisture resistance are required.
Typical applications include:
- Precast wastewater treatment structures
- Industrial utility vaults
- Concrete equipment enclosures
- Compressible isolation strips
- Concrete-to-metal cushioning
- Non-pressure-rated access cover gaskets
- Secondary joint sealing components
Its closed cell neoprene composition provides flexibility and cushioning in environments where moisture exposure may occur.
For applications involving oils, chemicals, or aggressive wastewater constituents, material compatibility should be verified before use.
Why ASTM D1056 2A2 Closed Cell Neoprene Sponge Is Important in Precast
Construction
Precast concrete components are manufactured under controlled conditions, but field installation introduces dimensional tolerances, uneven contact surfaces, temperature changes, and minor structural movement.
Without appropriate cushioning or isolation materials, adjoining concrete components may experience concentrated contact, unwanted vibration, or joint deterioration.
EVERLASTIC® NN2 helps address these challenges by providing a flexible, compressible layer between components.
Its ASTM D1056 2A2 classification offers a balance between the softer compression characteristics of Grade 1 materials and the increased firmness of Grade 3 materials.
This makes NN2 a versatile option for precast concrete manufacturers seeking a generalpurpose cushioning and isolation material that offers controlled compression without sacrificing flexibility.
Understanding the Difference Between NN1, NN1-C, NN2 & NN3
Williams Products offers multiple grades of EVERLASTIC® closed cell neoprene sponge to accommodate different compression and environmental requirements.
Product
ASTM
Classification
Relative
Firmness
Key Characteristic
EVERLASTIC®
NN1
ASTM D1056 2A1 Soft Light-duty cushioning and isolation
EVERLASTIC®
NN1-C
ASTM D1056 2C1 Soft
Cushioning and isolation with oilresistance requirements
EVERLASTIC®
NN2
ASTM D1056 2A2 Medium-Soft
Balanced cushioning and increased compression resistance
EVERLASTIC®
NN3
ASTM D1056 2A3 Medium-Firm
Firmer cushioning and greater compression resistance
Why choose NN2?
EVERLASTIC® NN2 is an excellent option when an application requires greater compression resistance than NN1 while maintaining more flexibility than the firmer NN3 material.
Its balance of softness and firmness makes it a practical choice for a variety of generalpurpose precast concrete cushioning and isolation applications.
The appropriate grade should be selected based on the anticipated compression, movement, environmental conditions, and applicable project specifications.
Material Specifications
Property Specification
Product Name EVERLASTIC® NN2
Material Closed Cell Neoprene Sponge Rubber
ASTM Classification ASTM D1056 2A2
Cell Structure Closed Cell
Material Type Cellular Rubber
Compression Characteristics Medium-Soft
Compression-Deflection
Classification
ASTM D1056 Grade 2
Available Forms Sheets, Strips, Pads & Custom Gaskets
Fabrication Custom Die-Cutting, Slitting & Cutting
Primary Markets
Precast Concrete, Highway, Bridge, Building & Industrial
Construction
Specific physical properties, tolerances, compression-deflection values, and test results should be confirmed using the current EVERLASTIC® NN2 technical data sheet. Suitability for watertight, structural, load-bearing, or specification-controlled applications must be verified for the intended use.
Custom Fabrication for Precast Manufacturers
At Williams Products, we understand that precast concrete manufacturers require consistent dimensions, dependable materials, and products that are ready for installation.
We offer EVERLASTIC® NN2 in a variety of fabricated configurations, including:
- Custom-width sponge strips
- Continuous-length cushioning and isolation strips
- Die-cut gaskets
- Custom-sized isolation pads
- Sheet material
- Specialty shapes for precast assemblies
Our fabrication capabilities help precast manufacturers minimize cutting and preparation time while maintaining consistency throughout production.
Whether you require a small quantity for a specialized project or production quantities for ongoing precast manufacturing, Williams Products can assist with your material requirements.
Product selection should be based on project requirements, design conditions, environmental exposure, and applicable project specifications. ASTM D1056 classification does not by itself indicate suitability for every application.
Sectors
Information
Tech data/spec sheet
Safety data sheet
Cut sheet
Contact us
Need EVERLASTIC® NN2 for Your Project?
Williams Products provides quality cellular rubber materials and custom fabrication for concrete and construction applications. Contact us for pricing, availability, and custom fabrication options.
Send us a message
"*" indicates required fields