Precast
Precast
EVERLASTIC® EVA200G – NYSDOT Approved Closed-Cell Foam Joint Seal
NYSDOT Section 705-08 Listed Material | Precast Concrete Expansion Joints | Structural Joint Sealing | Bridge & Infrastructure Construction
High-Performance Closed-Cell Foam Joint Sealing for Precast Concrete Construction
Williams Products’ EVERLASTIC® EVA200G is a preformed, closed-cell foam material designed for structural joint sealing applications in precast concrete, bridge, highway, and infrastructure construction.
EVERLASTIC® EVA200G NY-DOT is listed on the New York State Department of Transportation (NYSDOT) Approved Materials List under Section 705-08 – Preformed, Closed-Cell Foam Material.
This listing makes EVA200G an important material option for precast concrete manufacturers, contractors, and construction distributors supplying projects requiring NYSDOT Section 705-08 listed joint sealing materials.
Precast concrete structures frequently incorporate expansion and movement joints between adjoining concrete components. These joints must accommodate anticipated movement while helping protect the structure from moisture and environmental exposure.
EVERLASTIC® EVA200G provides a resilient closed-cell foam material for properly designed structural joint sealing systems.
Unlike open-cell foam materials, its closed-cell construction provides a foam structure intended to resist water penetration through the material and maintain resilience under appropriate compression.
Williams Products can custom fabricate EVERLASTIC® EVA200G into strips, joint seals, and project-specific dimensions for precast concrete and infrastructure applications.
Key Features & Benefits
- NYSDOT Section 705-08 Listed: EVA200G NY-DOT appears on the NYSDOT Approved Materials List for preformed closed-cell foam material.
- Closed-Cell Foam Construction: Provides a resilient cellular material for structural joint sealing applications.
- Expansion Joint Applications: Suitable for properly designed joints requiring accommodation of movement between adjoining concrete components.
- Moisture Resistance: Closed-cell construction helps resist moisture penetration through the foam material.
- Compression & Recovery: Designed to function through compression and recovery within the specified joint design limits.
- Structural Joint Protection: Helps protect joint openings from environmental exposure when properly installed.
- Precast Concrete Applications: A material option for precast bridge, highway, and structural concrete assemblies.
- Custom Fabrication: Available in custom-cut strips and specialty configurations.
- Specification-Driven Material: Particularly valuable for projects identifying NYSDOT 705-08 joint sealing requirements.
NYSDOT Section 705-08 Approved Materials Listing
Listed for Preformed, Closed-Cell Foam Material
EVERLASTIC® EVA200G NY-DOT is listed by the New York State Department of Transportation under the following category:
Property NYSDOT Listing
Department New York State Department of Transportation
Specification Section 705-08
Material Category Preformed, Closed-Cell Foam Material
Listed Product EVA200G NY-DOT
Listed Supplier Williams Products, Inc.
Primary Specification Application Structural Expansion Joint Sealing Systems
Why NYSDOT Listing Matters
For precast concrete manufacturers and contractors working on New York transportation projects, material selection often begins with the applicable Department of Transportation specifications.
Using a material listed under the required NYSDOT category can simplify product identification during project planning, purchasing, and material submittal preparation.
EVERLASTIC® EVA200G provides an established material option for projects specifying Section 705-08.
Important: NYSDOT listing applies to the specified material category. Final acceptance depends on the project requirements, current approved-list status, material documentation, and installation details. The listing does not constitute blanket approval for every precast concrete joint application.
Typical Precast Concrete Applications
1. Precast Concrete Bridge Components
Precast concrete bridge structures incorporate joints between structural components that must accommodate movement caused by temperature changes, loading, and other service conditions.
EVERLASTIC® EVA200G can be considered for structural joint sealing systems where preformed closed-cell foam material is specified.
Potential applications include:
- Precast bridge expansion joints
- Concrete bridge component interfaces
- Precast bridge deck joint systems
- Structural concrete movement joints
- Bridge approach and transition joints
- Specialty bridge sealing assemblies
The material provides a compressible joint sealing component that can accommodate movement within the designed system.
Joint dimensions, movement requirements, and sealing performance must be evaluated for the intended application.
2. Precast Concrete Wall Panels
Precast concrete wall panels frequently incorporate vertical and horizontal joints between adjoining panels.
These joints may require materials that accommodate movement while helping protect the assembly from moisture intrusion.
Potential applications include:
- Vertical precast wall panel joints
- Horizontal panel-to-panel joints
- Architectural precast concrete assemblies
- Exterior concrete wall movement joints
- Precast panel-to-structure interfaces
- Specialty concrete joint sealing details
EVERLASTIC® EVA200G provides a closed-cell foam material option for appropriately designed joint sealing systems.
Where a watertight or weatherproof assembly is required, the complete joint design and installation must provide the necessary performance.
3. Precast Concrete Highway Structures
Highway construction frequently incorporates precast concrete elements that require movement joints and sealing materials.
EVERLASTIC® EVA200G can be considered for applications involving:
- Precast highway concrete components
- Structural concrete expansion joints
- Bridge approach structures
- Precast concrete transition assemblies
- Transportation infrastructure joints
- Specialty highway joint sealing systems
Its NYSDOT Section 705-08 listing is particularly relevant to projects requiring approved preformed closed-cell foam material.
4. Precast Box Culverts & Drainage Structures
Precast box culverts and drainage structures contain joints between adjoining concrete sections.
Depending on the structure and specifications, these joints may require gaskets, sealants, waterstops, or other joint sealing materials.
EVERLASTIC® EVA200G may be evaluated for appropriate closed-cell foam joint sealing applications in:
- Precast drainage structures
- Box culvert connection details
- Concrete drainage enclosures
- Specialty stormwater structures
- Precast infrastructure assemblies
Important: EVA200G should not be substituted for a specified watertight culvert gasket, compression seal, or waterstop unless the engineer approves the complete joint design.
5. Precast Concrete Parking Structures
Precast parking structures incorporate movement joints between concrete components and adjoining structural assemblies.
EVERLASTIC® EVA200G may be considered for:
- Precast parking structure expansion joints
- Concrete panel movement joints
- Structural concrete separation joints
- Specialty parking garage joint sealing systems
- Concrete-to-concrete movement interfaces
The material’s closed-cell construction provides a resilient component for appropriately designed joint sealing systems.
6. Architectural Precast Concrete Construction
Architectural precast concrete panels require carefully detailed joints to accommodate movement and maintain the appearance and performance of the building envelope.
Potential applications include:
- Architectural precast wall joints
- Concrete façade expansion joints
- Precast panel separation
- Exterior concrete movement joints
- Specialty architectural joint systems
EVERLASTIC® EVA200G can be custom fabricated for project-specific joint dimensions.
7. Municipal & Transportation Infrastructure
Municipal infrastructure projects often incorporate precast concrete structures requiring movement accommodation and environmental protection.
EVERLASTIC® EVA200G can be considered for appropriately specified applications in:
- Transportation structures
- Municipal concrete infrastructure
- Precast utility structures
- Structural concrete expansion joints
- Specialty infrastructure joint sealing systems
The appropriate joint material must be selected based on the project specifications and performance requirements.
Why Closed-Cell Foam Joint Seals Are Important in Precast Concrete Construction
Precast concrete structures experience movement caused by temperature changes, shrinkage, loading, and other environmental conditions.
Properly designed joints allow adjoining concrete components to move without creating excessive restraint or damaging the surrounding structure.
Joint sealing materials help protect these openings while accommodating the anticipated movement.
Movement Accommodation
Closed-cell foam can compress and recover as joint dimensions change, provided the material operates within its specified compression range.
Moisture Resistance
The closed-cell structure helps resist moisture penetration through the foam material.
Joint Protection
Properly designed joint sealing systems help protect concrete joint openings from exposure to water, debris, and environmental conditions.
Resilient Compression
The material provides a compressible component that can maintain contact with adjoining joint surfaces under suitable installation conditions.
Custom Joint Dimensions
Precast concrete projects frequently require specific joint widths, depths, and material configurations. Custom fabrication helps accommodate these requirements.
Closed-Cell Foam vs. Open-Cell Foam Joint Materials
Feature
EVERLASTIC® EVA200G
Closed-Cell Foam
General Open-Cell Foam
Cell Structure Closed-Cell Open-Cell
Moisture Penetration
Through Material
Generally More Resistant Generally More Absorbent
Compression & Recovery
Dependent on Material
Properties
Dependent on Material
Properties
Structural Joint Sealing
Intended for Specified Joint
Systems
Requires ApplicationSpecific Evaluation
NYSDOT 705-08 Listing EVA200G NY-DOT Listed Not Established
Custom Fabrication Yes Material Dependent
EVERLASTIC® EVA200G is a specification-driven closed-cell foam product intended for applications requiring the appropriate joint sealing material.
Material Specifications
Property Specification
Product Name EVERLASTIC® EVA200G
NYSDOT Listed Name EVA200G NY-DOT
Material Type Preformed Closed-Cell Foam
NYSDOT Specification Section 705-08
NYSDOT Material
Category
Preformed, Closed-Cell Foam Material
Primary Function Structural Joint Sealing & Movement Accommodation
Primary Market Precast Concrete & Transportation Infrastructure
Available Forms Custom-Cut Strips & Joint Sealing Components
Available Dimensions Project-Specific Widths, Thicknesses & Lengths
Fabrication Custom Cutting & Specialty Configurations
Applications
Structural Expansion Joints, Precast Concrete & Bridge
Construction
Specific density, compression-deflection, recovery, water absorption, temperature resistance, and movement capabilities should be confirmed using the current EVERLASTIC® EVA200G technical data sheet. NYSDOT compliance and approved-list status should be verified for each project.
Custom Fabrication for Precast Concrete Manufacturers
At Williams Products, we understand that precast concrete manufacturers require dependable materials, consistent dimensions, and products that can be incorporated into their production process.
We offer EVERLASTIC® EVA200G in custom-fabricated configurations, including:
- Custom-width foam joint strips
- Project-specific thicknesses
- Precut lengths
- Specialty joint sealing components
- Custom shapes for precast assemblies
- Production quantities for precast manufacturers
- Project-specific packaging and fabrication requirements
Our fabrication capabilities help manufacturers reduce material preparation and jobsite cutting.
Whether you require a small quantity for a specialty precast project or production quantities for ongoing manufacturing, Williams Products can assist with your requirements.
Material selection should be based on the applicable project plans, engineering requirements, load conditions, environmental exposure, and intended application. MIL-C882 and AASHTO references should be verified against the current project specification before material is supplied or installed.
Sectors
Information
Tech data/spec sheet
Safety data sheet
Cut sheet
Contact us
Need Everlastic® EVA200G?
Contact Williams Products for pricing, availability, specifications, and custom fabrication options.
Send us a message
"*" indicates required fields