Precast
Precast
EVERLASTIC® 60 Durometer Plain AASHTO Bearing Pads
High-Performance Elastomeric Bearing Pads for Masonry, Structural Steel & Concrete Construction
Durable Load Distribution & Structural Support for Masonry Construction
Williams Products’ EVERLASTIC® 60 Durometer Plain AASHTO Bearing Pads are solid elastomeric rubber bearing pads designed for engineered construction applications requiring controlled load distribution, resilient support, and accommodation of limited structural movement.
Manufactured from 60 Shore A durometer rubber formulated to meet applicable AASHTO material requirements, these plain, unreinforced bearing pads provide a durable separation layer between structural components.
With a firmer rubber composition than 50 durometer bearing pads, EVERLASTIC® 60
Durometer Plain AASHTO Bearing Pads offer an alternative hardness for structural bearing applications where greater resistance to indentation and deformation may be desired.
These bearing pads are commonly specified for engineered interfaces involving structural steel, concrete, precast concrete, and load-bearing masonry assemblies.
By providing a resilient material between adjoining surfaces, the pads help distribute contact pressure, accommodate minor surface irregularities, and reduce direct hardsurface contact.
Unlike compressible sponge rubber materials, EVERLASTIC® AASHTO bearing pads are manufactured from solid elastomeric rubber intended for properly designed load-bearing applications.
Available in custom thicknesses, widths, and lengths, Williams Products can supply bearing pads to meet the dimensional requirements of masonry contractors, precast manufacturers, structural steel fabricators, and commercial construction projects.
Key Features & Benefits
- 60 Shore A Durometer Rubber: Offers a firmer elastomeric bearing material than
50 durometer rubber. - AASHTO Material Requirements: Available for applications requiring the applicable AASHTO elastomer grade and material specification.
- Plain, Unreinforced Construction: Solid elastomeric pads without internal steel reinforcement.
- Load Distribution: Helps distribute bearing pressure across properly designed structural contact areas.
- Controlled Compression: Provides resilient support with resistance to deformation under specified loads.
- Movement Accommodation: Allows limited compression, rotation, and shear deformation within engineered design limits.
- Surface Irregularity Compensation: Helps accommodate minor variations between adjoining structural surfaces.
- Structural Separation: Reduces direct steel-to-concrete and concrete-to-masonry contact.
- Custom Fabrication: Available in custom-cut sizes and thicknesses for projectspecific requirements.
Typical Masonry & Building Construction Applications
1. Structural Steel Beams Bearing on Masonry Walls
Structural steel beams are frequently supported by reinforced masonry walls in commercial, industrial, and institutional buildings.
Where specified by the structural engineer, EVERLASTIC® 60 Durometer Plain AASHTO
Bearing Pads provide an elastomeric bearing interface between the steel beam and its supporting masonry surface.
Typical applications include:
- Steel beams bearing on reinforced CMU walls
- Structural steel-to-masonry bearing interfaces
- Engineered steel lintel bearing locations
- Steel framing supported by masonry bearing elements
- Load-bearing masonry construction
- Specialty structural bearing applications
The elastomeric pad helps distribute contact pressure and accommodate minor surface irregularities while providing a resilient separation layer.
Its 60 durometer hardness provides greater resistance to indentation than a comparable 50 durometer rubber compound, although actual bearing performance depends on pad dimensions, load, and material properties.
Proper bearing pad sizing, allowable stress, and deformation must be determined by the structural engineer.
2. Precast Concrete Components Bearing on Masonry
Precast concrete components may be supported by reinforced masonry walls or other engineered bearing surfaces.
EVERLASTIC® 60 Durometer Plain AASHTO Bearing Pads provide a solid elastomeric interface for properly designed bearing locations.
Common applications include:
- Precast concrete beams bearing on masonry
- Precast concrete lintels and structural components
- Precast wall and building assemblies
- Concrete-to-CMU bearing interfaces
- Structural precast support points
- Engineered concrete bearing connections
The pads help distribute bearing pressure and accommodate limited movement or rotation within the design limits.
Their firmer elastomeric construction makes them an option where a 60 Shore A hardness is specified.
3. Structural Steel-to-Concrete Bearing Interfaces
Commercial and industrial buildings frequently incorporate structural steel components supported by concrete beams, columns, and other structural elements.
EVERLASTIC® 60 Durometer Plain AASHTO Bearing Pads can provide a resilient bearing interface between these materials.
Typical applications include:
- Steel beams supported by concrete
- Structural steel-to-concrete bearing points
- Steel framing support interfaces
- Concrete pedestal bearing applications
- Specialty structural steel connections
- Engineered support and isolation locations
Their solid rubber construction helps provide controlled deformation under load while maintaining separation between adjoining structural components.
4. Concrete Masonry Unit (CMU) Bearing Applications
Reinforced concrete masonry walls may incorporate structural components requiring elastomeric bearing materials.
EVERLASTIC® 60 Durometer Plain AASHTO Bearing Pads can be considered for:
- Reinforced CMU bearing walls
- Structural beam support locations
- Engineered masonry bearing connections
- Concrete-to-masonry support interfaces
- Specialty masonry structural assemblies
- Bearing locations requiring limited rotational accommodation
The pads provide a resilient interface that can help accommodate minor differences in bearing surface flatness.
Bearing pressure must remain within the design limits of both the pad and the supporting masonry.
5. Precast Concrete Stair & Landing Assemblies
Precast concrete stair and landing components may incorporate elastomeric bearing pads at designated support locations.
EVERLASTIC® 60 Durometer Plain AASHTO Bearing Pads may be used for:
- Precast stair landing support points
- Concrete stair-to-structural support interfaces
- Precast landing bearing locations
- Concrete-to-steel support connections
- Engineered precast building components
These applications require proper evaluation of loads, pad dimensions, deformation, and connection details.
6. Architectural Precast & Masonry Building Components
Architectural precast concrete and masonry construction frequently involve components supported by structural steel or concrete framing.
Where a load-bearing elastomeric interface is specified, EVERLASTIC® 60 Durometer Plain AASHTO Bearing Pads can provide a resilient support layer.
Typical applications include:
- Architectural precast bearing locations
- Precast façade support points
- Concrete-to-steel structural interfaces
- Specialty masonry building components
- Engineered architectural concrete assemblies
- Structural isolation at designated bearing locations
The bearing pads help maintain separation between adjoining materials while accommodating limited movement within the engineered connection.
7. Bridge & Highway Concrete Construction
EVERLASTIC® 60 Durometer Plain AASHTO Bearing Pads may also be used in engineered bridge and highway applications where plain elastomeric bearing pads are permitted by the project specifications.
Potential applications include:
- Precast bridge components
- Concrete-to-concrete bearing interfaces
- Structural steel-to-concrete support locations
- Engineered highway structures
- Specialty bridge bearing applications
Bearing design must satisfy the applicable bridge design requirements, including load, rotation, movement, stability, and material properties. Plain elastomeric pads are not interchangeable with reinforced bridge bearings.
Why Elastomeric Bearing Pads Are Important in Masonry Construction
Masonry, concrete, and structural steel are relatively rigid materials. When structural loads are transferred directly between uneven or dissimilar surfaces, localized contact pressures can develop.
These concentrated forces may contribute to cracking, crushing, or other damage if the bearing interface is not properly designed.
EVERLASTIC® 60 Durometer Plain AASHTO Bearing Pads help address these challenges by providing a resilient elastomeric layer between structural components.
Load Distribution
The bearing pad deforms under load, helping distribute contact pressure across the designed bearing area.
Controlled Compression
The 60 Shore A elastomer provides a firmer bearing interface than comparable 50 Shore A rubber, making it an option where the specified hardness and associated material properties are appropriate.
Accommodation of Minor Rotation
Structural beams and precast components may experience limited rotation under loading.
Properly designed elastomeric bearing pads can accommodate a degree of rotation through controlled deformation.
Limited Movement Accommodation
Elastomeric bearing pads can accommodate specified movement through shear deformation, provided the movement remains within the engineered design limits.
Surface Irregularity Compensation
Minor variations in adjoining structural surfaces can create uneven contact.
A properly designed bearing pad can help accommodate these irregularities and improve contact at the bearing interface.
60 Durometer vs. 50 Durometer AASHTO Bearing Pads
Williams Products offers multiple hardness options to accommodate different project specifications.
Feature 50 Durometer AASHTO 60 Durometer AASHTO
Hardness 50 Shore A 60 Shore A
Relative Firmness Softer Firmer
Relative Indentation Resistance Lower Higher
Elastomeric Flexibility Generally Greater Generally Lower
Structural Bearing Applications Engineered Applications Engineered Applications
Available Configurations Custom-Cut Plain Pads Custom-Cut Plain Pads
Important: A higher durometer does not automatically mean a higher allowable bearing load. Bearing capacity depends on the complete material specification, pad geometry, shape factor, loading, and applicable design requirements.
Material Specifications
Property Specification
Product Name EVERLASTIC® 60 Durometer Plain AASHTO Bearing Pads
Material Solid Elastomeric Rubber
Hardness 60 Shore A Durometer
Construction Plain / Unreinforced
Reinforcement None
Material Standard Applicable AASHTO Elastomer Specification
AASHTO Grade As Specified and Verified by Material Certification
Primary Function Structural Bearing & Load Distribution
Available Forms Custom-Cut Bearing Pads
Available
Dimensions
Custom Thicknesses, Widths & Lengths
Fabrication Precision Cutting & Custom Fabrication
Primary Markets
Masonry, Precast Concrete, Structural Steel & Building
Construction
Specific AASHTO grade, physical properties, allowable stresses, and test results should be confirmed using the current EVERLASTIC® AASHTO technical data sheet and applicable project requirements. AASHTO material conformity does not independently establish suitability for a particular structural bearing design.
Custom Fabrication for Masonry Contractors & Precast Manufacturers
At Williams Products, we understand that structural construction projects require consistent dimensions, dependable materials, and products manufactured to the specified requirements.
We offer EVERLASTIC® 60 Durometer Plain AASHTO Bearing Pads in custom configurations, including:
- Custom-cut rectangular bearing pads
- Square bearing pads
- Specialty bearing pad dimensions
- Project-specific thicknesses
- Pads for structural steel bearing locations
- Pads for precast concrete components
- Custom fabrication for engineered construction applications
Our fabrication capabilities help contractors and manufacturers receive bearing pads ready for installation, reducing jobsite preparation time and material waste.
Whether you require a small quantity for a specialized project or production quantities for ongoing construction, Williams Products can assist with your requirements.
Product selection should be based on project requirements, design conditions, environmental exposure, and applicable project specifications. ASTM D1056 classification does not by itself indicate suitability for every application.
Sectors
Information
Tech data/spec sheet
Safety data sheet
Cut sheet
Contact us
Need Everlastic® AASHTO 60 for Your Project?
Williams Products provides quality cellular rubber materials and custom fabrication for concrete and construction applications. Contact us for pricing, availability, and custom fabrication options.
Send us a message
"*" indicates required fields