Williams Products

Precast

Precast

EVERLASTIC® 1200 Series – 70 Durometer Commercial Grade Neoprene Bearing Pads

Firm, Durable Solid Neoprene Bearing Pads for Masonry, Structural Steel & Concrete Construction

Dependable Load Distribution, Firm Cushioning & Structural Isolation for Masonry Construction

Williams Products’ EVERLASTIC® 1200 Series 70 Durometer Commercial Grade Neoprene is a solid elastomeric rubber material designed for masonry and building construction applications requiring firm cushioning, load distribution, structural separation, and accommodation of limited movement between adjoining components.

Manufactured from commercial-grade neoprene rubber with a 70 Shore A durometer hardness, this material offers a combination of firmness, resilience, and resistance to indentation for a wide range of commercial construction applications.

With a firmer composition than 40, 50, or 60 durometer neoprene, EVERLASTIC® 1200 Series 70 Durometer Neoprene provides increased resistance to indentation under comparable conditions while retaining elastomeric flexibility.

The material helps accommodate minor surface irregularities, reduces direct contact between adjoining structural components, and provides a durable separation layer at designated bearing and isolation locations.

Unlike closed cell sponge rubber, EVERLASTIC® 1200 Series is manufactured from solid neoprene rubber, providing a resilient material for commercial construction applications.

Available in custom thicknesses, widths, lengths, strips, and pads, Williams Products can fabricate this material to meet the requirements of masonry contractors, precast manufacturers, structural steel fabricators, and commercial building projects.

Key Features & Benefits

  • 70 Shore A Durometer Hardness: Provides a firmer elastomeric material than 40,
    50, or 60 durometer neoprene.
  • Commercial Grade Neoprene: A cost-effective material option for applications that do not require certified AASHTO-grade rubber.
  • Solid Rubber Construction: Noncellular elastomeric material offering resilient cushioning and separation.
  • Controlled Compression: Helps provide firm, resilient support at properly designed contact locations.
  • Load Distribution: Helps distribute contact pressure at engineered bearing interfaces.
  • Vibration & Impact Cushioning: Helps reduce direct contact and provide cushioning between adjoining components.
  • Surface Irregularity Compensation: Helps accommodate minor variations between adjoining masonry, concrete, and steel surfaces.
  • Weather & Moisture Resistance: Neoprene offers useful resistance to moisture and outdoor exposure in suitable applications.
  • Custom Fabrication: Available in custom-cut pads, strips, sheets, and specialty configurations.

Typical Masonry & Building Construction Applications

1. Structural Steel Beams Bearing on Masonry Walls

Structural steel beams are frequently supported by reinforced masonry walls in commercial, industrial, and institutional buildings.

Where permitted by the project specifications and approved by the structural engineer, EVERLASTIC® 1200 Series 70 Durometer Commercial Grade Neoprene can provide a firm, resilient bearing interface between structural steel and supporting masonry surfaces.

Typical applications include:

  • Steel beams bearing on reinforced CMU walls
  • Structural steel-to-masonry bearing interfaces
  • Engineered steel lintel bearing locations
  • Steel framing supported by masonry bearing elements
  • Commercial building bearing assemblies
  • Specialty structural support applications

The material helps accommodate minor surface irregularities while providing a resilient separation layer.

Its 70 durometer hardness provides greater resistance to indentation than softer commercial neoprene grades under comparable conditions.

Structural bearing applications require engineering evaluation of compressive stress, pad dimensions, deformation, stability, and material properties.

2. Precast Concrete Components Bearing on Masonry

Precast concrete components may be supported by masonry walls, concrete beams, or other engineered bearing surfaces.

EVERLASTIC® 1200 Series 70 Durometer Neoprene can be considered for properly designed support and cushioning applications.

Common applications include:

  • Precast concrete components supported by masonry
  • Precast concrete lintels
  • Architectural precast assemblies
  • Concrete-to-CMU bearing interfaces
  • Noncritical cushioning and support locations
  • Specialty precast building components

Its elastomeric composition helps accommodate minor surface variations and maintain separation between adjoining components.

Where the pad transfers structural loads, the design must be evaluated by the project engineer.

3. Structural Steel-to-Concrete Bearing Interfaces

Commercial and industrial buildings frequently incorporate steel framing supported by concrete components.

EVERLASTIC® 1200 Series 70 Durometer Neoprene provides a firm, resilient material option for cushioning and isolation between these surfaces.

Typical applications include:

  • Steel-to-concrete contact cushioning
  • Structural steel support interfaces
  • Concrete pedestal isolation
  • Steel framing separation pads
  • Specialty construction bearing applications
  • Nonstructural contact isolation locations

The solid neoprene construction provides a resilient interface that helps reduce direct contact between adjoining building materials.

4. Concrete Masonry Unit (CMU) Bearing & Isolation Applications

Concrete masonry construction frequently requires rubber materials for cushioning, separation, and isolation.

EVERLASTIC® 1200 Series 70 Durometer Commercial Grade Neoprene can be fabricated into pads and strips for a variety of masonry applications.

Typical uses include:

  • Reinforced CMU wall interfaces
  • Masonry-to-steel separation pads
  • Masonry-to-concrete cushioning
  • Isolation at designated wall connections
  • Nonstructural contact protection
  • Specialty masonry assemblies

Its 70 Shore A hardness makes it a useful option when a firmer solid rubber material is desired.

5. Precast Concrete Stair & Landing Assemblies

Precast concrete stairs and landings may incorporate elastomeric pads at designated support or isolation locations.

EVERLASTIC® 1200 Series 70 Durometer Neoprene can be used in appropriately designed applications such as:

  • Precast stair landing cushioning
  • Concrete-to-steel isolation pads
  • Precast landing support interfaces
  • Concrete component separation
  • Specialty precast building assemblies

The material provides firm cushioning while helping accommodate minor surface irregularities.

Structural support locations require proper evaluation of bearing loads and material suitability.

6. Architectural Precast & Masonry Building Components

Architectural precast concrete and masonry construction frequently involve decorative panels, façades, and building components that require cushioning or separation from adjoining materials.

EVERLASTIC® 1200 Series 70 Durometer Neoprene can provide a resilient isolation layer in these assemblies.

Typical applications include:

  • Architectural precast panel cushioning
  • Concrete-to-steel separation pads
  • Masonry façade component isolation
  • Decorative concrete support interfaces
  • Specialty architectural assemblies
  • Nonstructural contact cushioning

The material helps accommodate minor movement and dimensional variations between adjoining components.

7. Equipment & Industrial Isolation in Masonry Buildings

Commercial and industrial buildings frequently incorporate equipment mounted on concrete or masonry surfaces.

EVERLASTIC® 1200 Series 70 Durometer Neoprene may be considered for firm cushioning and general-purpose isolation applications.

Typical applications include:

  • Equipment mounting pads
  • Concrete equipment base cushioning
  • Industrial equipment separation
  • Steel-to-concrete contact isolation
  • General-purpose protective rubber pads
  • Specialty industrial building applications

The material provides a firm rubber interface that helps reduce direct contact between adjoining components.

Actual vibration isolation performance depends on equipment loads, excitation frequencies, pad geometry, and material stiffness. Performance should be verified for the intended application.

Why 70 Durometer Commercial Neoprene Is Important in Masonry Construction

Masonry, concrete, and structural steel are relatively rigid materials. When these components come into direct contact, localized pressure, vibration, and surface irregularities may affect the performance of the assembly.

EVERLASTIC® 1200 Series 70 Durometer Neoprene helps address these challenges by providing a firm, resilient elastomeric separation layer.

Firm Cushioning & Separation

The 70 Shore A hardness provides a firmer rubber composition than 40, 50, or 60 Shore A neoprene while retaining elastomeric flexibility.

Contact Pressure Distribution

At properly designed bearing interfaces, the rubber pad can deform to accommodate minor surface variations and help distribute contact pressure.

Contact Isolation

The elastomeric material provides a separation layer between adjoining components, helping reduce direct hard-surface contact.

Surface Irregularity Compensation

Minor variations in concrete, masonry, or steel surfaces can create uneven contact. Neoprene helps accommodate these irregularities.

Material Durability

Neoprene offers useful resistance to weathering, moisture, and general environmental exposure, making it a practical choice for many building construction applications.

Understanding 70 Durometer Hardness

Durometer measures the hardness of rubber materials.

A 70 Shore A material is firmer than comparable 40, 50, or 60 Shore A neoprene.

This makes 70 durometer neoprene an option for commercial cushioning, isolation, and properly engineered bearing applications where a firmer rubber material is desired.

However, durometer alone does not determine structural load capacity.

Proper material selection also requires consideration of:

  • Compressive stress
  • Pad thickness and dimensions
  • Shape factor
  • Required movement and deformation
  • Environmental exposure
  • Material tensile strength and compression properties
  • Applicable project specifications

The appropriate pad configuration must be determined based on the intended application.

Commercial Grade Neoprene vs. AASHTO Bearing Pads

Williams Products offers both commercial-grade neoprene and AASHTO-grade bearing pad materials.

Selecting the appropriate product depends on the project specifications and performance requirements.

Feature
EVERLASTIC® 1200 Series
Commercial Neoprene
EVERLASTIC® AASHTO Bearing
Pads

Material Solid Neoprene Rubber Solid Elastomeric Rubber

Hardness 70 Shore A
Specified AASHTO Hardness
Grade

Primary
Applications
Commercial Cushioning, Isolation &
Approved Bearing Uses
Specification-Driven Structural
Bearing Applications

AASHTO
Certification
Not Claimed
As Verified by Material
Certification

Custom
Fabrication
Yes Yes

EVERLASTIC® 1200 Series 70 Durometer Commercial Grade Neoprene is an economical option for applications where certified AASHTO-grade material is not required.

Material Specifications

Property Specification

Product Name
EVERLASTIC® 1200 Series 70 Durometer Commercial Grade
Neoprene

Material Solid Neoprene Rubber

Material Grade Commercial Grade

Hardness 70 Shore A Durometer

Construction Solid / Noncellular Rubber

Reinforcement None

Primary Functions Firm Cushioning, Isolation & Approved Bearing Applications

AASHTO Certification Not Claimed

Available Forms Sheets, Strips, Pads & Custom-Cut Pieces

Available
Dimensions
Custom Thicknesses, Widths & Lengths

Fabrication Precision Cutting, Slitting & Die-Cutting

Primary Markets
Masonry, Precast Concrete, Structural Steel & Building
Construction

Additional physical properties, including tensile strength, compression properties, dimensional tolerances, test methods, and temperature limitations, should be confirmed using the current EVERLASTIC® 1200 Series technical data sheet.

Custom Fabrication for Masonry Contractors & Precast Manufacturers

At Williams Products, we understand that construction projects require consistent dimensions, dependable materials, and products ready for installation.

We offer EVERLASTIC® 1200 Series 70 Durometer Commercial Grade Neoprene in a variety of fabricated configurations, including:

  • Custom-cut rectangular bearing pads
  • Square neoprene pads
  • Custom-width isolation strips
  • Specialty neoprene gaskets
  • Project-specific thicknesses
  • Neoprene sheets
  • Custom shapes for masonry and concrete assemblies

Our fabrication capabilities help contractors and manufacturers reduce jobsite cutting and preparation time while maintaining consistent material dimensions.

Whether you require a small quantity for a specialized project or production quantities for ongoing construction, Williams Products can assist with your requirements.

Bearing pad material and construction should be selected based on the applicable project plans, specifications, design loads, environmental conditions, and intended application.
Product selection should be verified for the specific requirements of the project.

Sectors

Information

Contact us

Need Everlastic® 1200 Sheries 70 Duro Bearing Pads?

Contact Williams Products for pricing, availability, custom sizes, and fabrication options.

Send us a message

"*" indicates required fields