Masonry
Masonry
Everlastic® EJ2000
Flexible Expansion & Isolation Joint Filler for Masonry Construction
EVERLASTIC® EJ2000 from Williams Products is a flexible, lightweight expansion and isolation joint filler designed for use throughout masonry, concrete, and building construction.
Supplied in convenient roll form, EJ2000 provides contractors with an easy-to-handle joint filler that can be quickly installed between masonry and adjoining concrete or structural components.
Its flexibility allows EJ2000 to conform to straight runs, curves, columns, foundations, walls, slabs, and irregular construction conditions, making it a versatile alternative to rigid expansion joint materials.
Flexible Expansion Joint Filler for Masonry Construction
Masonry frequently interfaces with concrete and other structural building components.
These adjoining materials can move independently as a result of temperature changes, moisture conditions, drying shrinkage, loading, and normal building movement.
EVERLASTIC® EJ2000 provides a compressible separation layer between adjoining construction materials, helping maintain the designed joint and allowing movement to occur without rigid contact between the components.
Key Features & Benefits
- Flexible expansion and isolation joint filler
- Supplied in convenient roll form
- Lightweight and easy to handle
- Flexible enough to follow curves and irregular surfaces
- Easy to cut and install
- Provides separation between adjoining construction materials
- Helps accommodate movement
- Compressible construction
- Excellent for masonry-to-concrete interfaces
- Ideal around columns and structural components
- Reduces handling compared with rigid joint filler sheets
- Available in multiple sizes
- Contractor-friendly installation
- Suitable for commercial, institutional, industrial, and masonry construction
Masonry-to-Concrete Isolation
One of the primary applications for EVERLASTIC® EJ2000 in masonry construction is isolating masonry from adjoining concrete components.
Brick, block, concrete, and structural components can respond differently to temperature, moisture, shrinkage, and loading.
EJ2000 creates a flexible separation between these materials, helping prevent direct rigid contact where an isolation joint is required.
Typical applications include separation between masonry and:
- Concrete slabs
- Sidewalks
- Foundations
- Concrete walls
- Columns
- Curbs
- Floors
- Precast concrete
- Structural components
- Other adjoining construction materials
Expansion Joints Between Masonry & Concrete Flatwork
Exterior masonry construction frequently meets concrete flatwork.
Sidewalks, entrance slabs, patios, plazas, and other concrete surfaces should not necessarily be placed directly against masonry without consideration for movement.
EVERLASTIC® EJ2000 can provide a compressible isolation joint between the concrete flatwork and the masonry structure.
Typical locations include:
- Sidewalks against brick walls
- Concrete slabs against masonry
- Entrance slabs
- Concrete patios
- Exterior plazas
- Concrete aprons
- Walkways
- Curbs
- Concrete paving adjacent to buildings
This separation allows the concrete and masonry components to move more independently.
Ideal Around Columns
Columns create a common isolation-joint condition in both masonry and concrete construction.
When concrete floors or slabs are placed around columns, a compressible separation material can be used to isolate the structural component from the surrounding concrete.
The flexibility of EVERLASTIC® EJ2000 makes it particularly useful around columns, because the material can follow the shape of the structural component without requiring numerous rigid pieces to be cut and fitted together.
Applications can include:
- Concrete columns
- Masonry columns
- Structural steel columns
- Column bases
- Interior floor slabs
- Exterior concrete slabs
- Industrial floors
Flexible Enough for Curves
One of the biggest advantages of EVERLASTIC® EJ2000 is its flexibility.
Rigid expansion joint materials can be difficult to install around curves, circular structures, columns, and irregular construction details.
EJ2000 can bend and conform to curved surfaces, making it an excellent choice for:
- Curved masonry walls
- Circular columns
- Radius concrete work
- Curved sidewalks
- Landscape walls
- Architectural concrete
- Circular foundations
- Irregular building configurations
This flexibility can reduce field cutting and make installation faster and easier.
Convenient Roll-Form Material
EVERLASTIC® EJ2000 is supplied in roll form, providing a major handling advantage on the jobsite.
Instead of working with individual rigid sheets or short sections of joint filler, contractors can unroll EJ2000 along the joint as the work progresses.
Roll-form material can provide several installation advantages:
- Easier transportation around the jobsite
- Reduced handling
- Fewer individual pieces
- Faster installation
- Easier installation along long joint runs
- Less field cutting
- Convenient storage
- Easy installation around curves
For contractors installing hundreds or thousands of feet of expansion or isolation joint material, these advantages can translate into meaningful labor savings.
Foundations & Building Perimeters
EVERLASTIC® EJ2000 can be used where concrete flatwork or other construction meets the building foundation or exterior masonry wall.
These perimeter joints provide separation between the building and adjoining concrete surfaces.
Typical applications include:
- Building perimeter isolation
- Foundation walls
- Exterior brick walls
- CMU walls
- Sidewalk-to-building joints
- Slab-to-wall joints
- Entrance slabs
- Concrete aprons
- Exterior paving
Interior Masonry & Floor Applications
EJ2000 is also useful for interior construction where concrete floor slabs meet masonry walls, columns, or other structural components.
A compressible perimeter isolation material allows the floor slab to move independently from the surrounding construction.
Typical applications include:
- Concrete floors against CMU walls
- Slab-to-wall isolation
- Slabs around columns
- Industrial floors
- Warehouse floors
- Commercial buildings
- Schools
- Hospitals
- Municipal facilities
- Manufacturing facilities
Lightweight & Easy to Install
EVERLASTIC® EJ2000 is designed with the installer in mind.
Its lightweight, flexible construction makes it easy to carry, position, cut, and install on the jobsite.
Contractors can simply unroll the material along the joint and cut it to the required length, reducing the handling associated with rigid expansion joint materials.
The flexibility of EJ2000 also helps the material conform to variations in the adjoining construction.
Helps Maintain Proper Joint Separation
Expansion and isolation joints require a consistent separation between adjoining construction components.
EVERLASTIC® EJ2000 provides a compressible filler within the joint, helping maintain the required space during concrete placement and construction.
Where a sealant is required at the exposed surface, the joint can be detailed according to the architectural drawings and sealant manufacturer’s recommendations.
Masonry Renovation & New Construction
EVERLASTIC® EJ2000 can be used in both new masonry construction and appropriate renovation applications.
Typical projects include:
- Commercial buildings
- Schools
- Hospitals
- Municipal buildings
- Retail centers
- Multi-family construction
- Industrial facilities
- Warehouses
- Institutional buildings
- Architectural masonry
- Exterior site concrete
Typical Masonry Applications
EVERLASTIC® EJ2000 is an excellent option for:
- Masonry-to-concrete isolation joints
- Brick-to-concrete interfaces
- CMU-to-concrete interfaces
- Building perimeter joints
- Sidewalk-to-building joints
- Concrete slabs against masonry walls
- Isolation around columns
- Foundations
- Curbs and gutters adjacent to masonry
- Entrance slabs
- Exterior plazas
- Concrete paving
- Interior floor slabs
- Curved construction
- Radius applications
- Architectural concrete and masonry
Industries & Markets Served
Masonry Construction | Concrete Construction | Commercial Construction | Institutional Construction | Industrial Construction | Architectural Masonry | Municipal Construction | Multi-Family Construction | Site Concrete
Why Choose EVERLASTIC® EJ2000?
EVERLASTIC® EJ2000 provides masonry and concrete contractors with a practical alternative to traditional rigid expansion joint filler materials.
Its combination of:
Flexibility | Roll-Form Convenience | Lightweight Handling | Compressibility | Easy Installation | Curved-Surface Conformability
makes EJ2000 particularly useful where masonry construction interfaces with concrete slabs, sidewalks, foundations, walls, columns, and other structural components.
For contractors, the ability to unroll the material directly into the joint rather than cutting and fitting numerous rigid pieces can make installation faster and easier.
Product selection should be based on project requirements, design conditions, environmental exposure, and applicable project specifications. ASTM D1056 classification does not by itself indicate suitability for every application.
Sectors
Information
Tech data/spec sheet
Safety data sheet
Cut sheet
Contact us
Need Everlastic® EJ2000 for Your Project?
Williams Products provides quality cellular rubber materials and custom fabrication for concrete and construction applications. Contact us for pricing, availability, and custom fabrication options.
Send us a message
"*" indicates required fields