Masonry
Masonry
Everlastic® NN3
ASTM D1056 2A3 Closed-Cell Neoprene Sponge for Masonry Construction
EVERLASTIC® NN3 from Williams Products is a durable, firm closed-cell neoprene sponge meeting ASTM D1056 2A3, designed for sealing, cushioning, isolation, separation, and joint applications throughout brick, block, stone, and masonry construction.
NN3 provides a firmer cellular sponge for applications requiring greater resistance to compression while maintaining the resilience, flexibility, and moisture resistance of closed-cell neoprene sponge.
Williams Products can fabricate EVERLASTIC® NN3 into strips, pads, gaskets, spacers, and custom components, with optional Pressure-Sensitive Adhesive (PSA) available to simplify installation.
ASTM D1056 2A3 Closed-Cell Neoprene Sponge
EVERLASTIC® NN3 meets ASTM D1056 2A3, providing contractors, architects, engineers, masonry suppliers, and building-envelope professionals with a specification-grade cellular neoprene material for demanding construction applications.
Compared with softer ASTM D1056 sponge classifications, 2A3 provides greater compression resistance, making NN3 particularly useful where a firmer cellular material is required.
Key Features & Benefits
- Meets ASTM D1056 2A3
- Closed-cell neoprene sponge
- Firm and resilient
- Greater resistance to compression
- Low water absorption
- Flexible cellular construction
- Provides cushioning and separation
- Helps accommodate movement between adjoining components
- Suitable for interior and exterior masonry construction
- Easily fabricated into strips, pads, gaskets, and spacers
- Custom thicknesses, widths, and lengths available
- Available with optional Pressure-Sensitive Adhesive (PSA)
A Firmer Sponge for Demanding Masonry Applications
Not every masonry application requires a soft, highly compressible sponge.
Some applications require a material that provides greater support and resistance to compression while still maintaining the benefits of a cellular rubber product.
EVERLASTIC® NN3 provides this balance.
Its ASTM D1056 2A3 classification makes NN3 particularly useful for fabricated construction components where cushioning, separation, dimensional support, and resilience are required.
Masonry Control Joint Applications
Concrete masonry walls experience movement caused by drying shrinkage, temperature changes, moisture conditions, and normal building movement.
Control joints provide predetermined locations where this movement can be accommodated.
EVERLASTIC® NN3 can be fabricated into strips and components for masonry controljoint assemblies, providing a resilient cellular material within the joint.
Typical applications include:
- CMU control joints
- Concrete block walls
- Vertical masonry joints
- Exterior masonry walls
- Interior masonry walls
- Commercial masonry construction
- Industrial masonry construction
Brick & Masonry Expansion Joints
Brick, block, stone, and other masonry systems may require expansion or separation joints between adjoining sections or dissimilar building materials.
EVERLASTIC® NN3 provides a firm, compressible closed-cell neoprene material that can be fabricated specifically for these joint conditions.
Applications can include:
- Brick expansion joints
- Masonry expansion joints
- Brick-to-concrete interfaces
- Block-to-concrete interfaces
- Masonry-to-precast interfaces
- Wall transitions
- Building perimeter joints
- Vertical and horizontal separation joints
- Joints between dissimilar construction materials
Masonry-to-Concrete Separation
Masonry frequently interfaces directly with structural concrete and precast components.
These materials can respond differently to temperature, moisture, loading, and building movement.
EVERLASTIC® NN3 can provide a resilient separation and cushioning layer between masonry and adjoining concrete surfaces.
Typical locations include:
- Concrete columns
- Concrete walls
- Foundations
- Structural slabs
- Concrete beams
- Precast concrete
- Other structural components
The firmer characteristics of NN3 make it particularly useful where greater support is desired while maintaining a resilient separation layer.
Closed-Cell Performance for Exterior Masonry
Exterior masonry assemblies are routinely exposed to rain, humidity, temperature changes, and other environmental conditions.
The closed-cell structure of EVERLASTIC® NN3 helps limit water absorption, making it well suited for applications where moisture resistance is important.
NN3 maintains the resilience and flexibility required for construction applications while providing the additional firmness associated with its ASTM D1056 2A3 classification.
Available with Pressure-Sensitive Adhesive (PSA)
For applications where easier installation and positioning are important, EVERLASTIC® NN3 can be supplied with Pressure-Sensitive Adhesive (PSA).
PSA backing allows the installer to remove the release liner and position the fabricated NN3 component against a compatible surface.
This can be particularly beneficial for:
- Vertical masonry joints
- Masonry-to-concrete interfaces
- Precast-to-masonry interfaces
- Window and door openings
- Gaskets and fabricated pads
- Difficult-to-access locations
- Factory assembly
- Field installation
The PSA helps hold NN3 in position during installation, reducing handling and simplifying placement.
PSA is intended primarily as an installation aid and should not replace structural or mechanical attachment where required.
Window, Door & Building Openings
Masonry openings create transitions between brick or block and other building components.
EVERLASTIC® NN3 can be fabricated into strips, pads, and gaskets for applications around:
- Windows
- Doors
- Louvers
- Wall penetrations
- Architectural components
- Precast components
- Building-envelope transitions
Optional PSA backing can further simplify installation around vertical openings and other difficult-to-position areas.
Pads, Spacers & Custom Masonry Components
The firmer nature of ASTM D1056 2A3 makes EVERLASTIC® NN3 particularly useful for fabricated components requiring cushioning combined with greater support and compression resistance.
Williams Products can fabricate NN3 into:
- Pads
- Spacers
- Separators
- Gaskets
- Continuous strips
- Sheets
- Die-cut components
- Custom shapes
- PSA-backed components
Custom Fabricated for Your Masonry Project
Williams Products specializes in converting and fabricating cellular rubber and foam materials for the construction industry.
EVERLASTIC® NN3 can be slit, cut, fabricated, and adhesive-backed to your project requirements.
Material can be supplied to your required:
- Thickness
- Width
- Length
- Shape
- Quantity
- PSA configuration
This allows contractors, masonry suppliers, precasters, and manufacturers to receive components ready for installation rather than cutting bulk material in the field.
Typical Masonry Applications
EVERLASTIC® NN3 can be used throughout masonry and building construction, including:
- Masonry control joints
- CMU control joints
- Brick expansion joints
- Masonry expansion joints
- Building perimeter joints
- Brick-to-concrete separation
- Block-to-concrete separation
- Masonry-to-precast interfaces
- Window and door openings
- Architectural masonry
- Stone construction
- Building-envelope transitions
- Custom masonry gaskets
- Cushioned spacers and separators
- Fabricated construction pads
Industries & Markets Served
Masonry Construction | Brick Construction | Concrete Masonry | Commercial Construction | Building Envelope | Architectural Masonry | Precast Construction | Industrial Construction
Why Choose EVERLASTIC® NN3?
EVERLASTIC® NN3 combines the performance of ASTM D1056 2A3 closed-cell neoprene sponge with Williams Products’ custom fabrication capabilities.
For applications requiring a firmer cellular material with greater compression resistance, NN3 provides an excellent combination of:
Firmness | Compression Resistance | Resilience | Moisture Resistance | Cushioning | Separation | Custom Fabrication
Williams Products can supply NN3 as standard material or fabricate it into ready-to-install strips, pads, gaskets, spacers, and optional PSA-backed components.
Product selection should be based on project requirements, design conditions, environmental exposure, and applicable project specifications. ASTM D1056 classification does not by itself indicate suitability for every application.
Sectors
Information
Tech data/spec sheet
Safety data sheet
Cut sheet
Contact us
Need Everlastic® NN3 for Your Project?
Williams Products provides quality cellular rubber materials and custom fabrication for concrete and construction applications. Contact us for pricing, availability, and custom fabrication options.
Send us a message
"*" indicates required fields