Williams Products

Precast

Precast

ABS Plastic Shims – Leveling & Spacing Shims for Concrete Construction

Acrylonitrile Butadiene Styrene Shims | Precast Concrete Leveling | Concrete Panel Alignment | Construction Spacers & Custom Plastic Shims

Durable ABS Plastic Shims for Concrete & Precast Concrete Construction

Williams Products supplies ABS (Acrylonitrile Butadiene Styrene) Plastic Shims for concrete contractors, precast concrete manufacturers, erectors, masonry contractors, and construction distributors.

Manufactured from ABS thermoplastic, these shims provide a rigid, impact-resistant, and versatile solution for leveling, alignment, spacing, and positioning concrete and precast components during construction and installation.

Proper alignment is essential in concrete construction. Precast wall panels, architectural concrete components, concrete stairs, equipment foundations, and specialty precast assemblies frequently require precise positioning to achieve the specified elevation, spacing, and fit.

ABS shims can be placed at designated contact points to make controlled adjustments during installation while maintaining consistent spacing between adjoining materials.

ABS is an engineering thermoplastic known for its combination of toughness, rigidity, impact resistance, and dimensional stability.

Its construction makes it a practical option for applications requiring consistent thickness, durability during handling, and resistance to cracking under ordinary installation conditions.

Unlike wood shims, ABS plastic shims do not swell from moisture exposure in the same manner or deteriorate through biological decay.

Williams Products offers ABS shims in a variety of thicknesses, dimensions, and customcut configurations to meet project-specific concrete construction requirements.

Key Features & Benefits

  • ABS Thermoplastic Construction: Durable engineering plastic combining rigidity and toughness.
  • Impact Resistance: Provides resistance to cracking and damage during ordinary handling and installation.
  • Accurate Leveling & Alignment: Helps position concrete and precast components at the required elevation.
  • Consistent Spacing: Provides controlled separation between adjoining concrete components.
  • Dimensional Consistency: Uniform material thickness supports accurate installation adjustments.
  • Moisture Resistant: Does not absorb water or swell like wood, although some moisture absorption is possible.
  • Noncorrosive Material: Will not rust or corrode like metal shims.
  • Rot Resistant: Does not deteriorate through biological rot.
  • Lightweight & Easy to Handle: Convenient for concrete installation crews and precast erectors.
  • Custom Fabrication: Available in custom dimensions, strips, and specialty configurations.

Typical Concrete & Precast Concrete Applications

1. Precast Concrete Wall Panel Leveling

Precast concrete wall panels require accurate positioning during erection and installation.

ABS shims can be used at designated locations to help establish the proper elevation and alignment before final connections or grouting.

Typical applications include:

  • Precast wall panel leveling
  • Concrete panel elevation adjustment
  • Architectural precast wall installation
  • Precast panel-to-foundation interfaces
  • Concrete wall alignment
  • Specialty precast erection applications

ABS shims provide consistent thicknesses that help installers make controlled adjustments during erection.

Where shims remain beneath load-bearing panels, their suitability must be verified by the project engineer.

2. Architectural Precast Concrete Installation

Architectural precast concrete components frequently require precise alignment to maintain consistent joint widths and finished appearance.

ABS shims help installers position components accurately.

Typical applications include:

  • Architectural concrete wall panels
  • Decorative precast elements
  • Concrete façade installation
  • Precast trim and architectural features
  • Panel-to-panel alignment
  • Concrete component spacing

Their rigid and impact-resistant construction provides a convenient material option for alignment during installation.

3. Precast Concrete Stair & Landing Installation

Precast concrete stairs and landings must be installed at the correct elevation and alignment.

ABS shims may be used during installation to make minor positioning adjustments.

Potential applications include:

  • Precast stair leveling
  • Concrete landing alignment
  • Stair-to-structure positioning
  • Concrete step installation
  • Specialty precast stair assemblies

Shim placement and permanent loading requirements must be reviewed as part of the installation design.

4. Precast Concrete Utility Structures

Precast utility vaults, drainage structures, and concrete enclosures may require leveling and spacing during installation.

ABS shims can assist with:

  • Utility vault leveling
  • Precast concrete enclosure alignment
  • Concrete access structure positioning
  • Specialty underground precast installations
  • Concrete component spacing
  • Installation adjustment

The suitability of ABS for prolonged moisture, temperature, chemical, and environmental exposure should be evaluated for each application.

5. Concrete Equipment Foundations

Equipment installed on concrete foundations often requires precise alignment and elevation adjustment.

ABS shims can be used for suitable positioning applications.

Potential uses include:

  • Equipment base alignment
  • Concrete pedestal leveling
  • Machinery positioning
  • Steel base plate adjustment
  • Equipment installation spacing
  • Specialty construction leveling

For heavily loaded equipment or permanent support applications, the engineer must verify the shim material’s compressive properties, creep resistance, and long-term suitability.

6. Concrete-to-Steel Construction Interfaces

Steel components installed on concrete surfaces may require shimming to achieve proper alignment.

ABS shims can be used in suitable applications involving:

  • Steel framing alignment
  • Concrete-to-steel spacing
  • Steel bracket positioning
  • Base plate leveling
  • Specialty steel connection installation
  • Construction adjustment

The use of ABS shims in structural steel connections must be approved by the responsible engineer.

7. Precast Concrete Parking Structures

Precast parking structures incorporate multiple structural components that require accurate positioning during erection.

ABS shims may be used as temporary positioning aids or permanent components where permitted by the project design.

Potential applications include:

  • Precast parking structure component alignment
  • Concrete wall panel leveling
  • Architectural parking structure components
  • Concrete-to-concrete spacing
  • Specialty precast erection details

The required shim dimensions and loading characteristics depend on the specific installation.

Why ABS Shims Are Important in Concrete Construction

Concrete construction requires accurate positioning of components to achieve proper alignment, elevation, and fit.

Small dimensional variations can occur during manufacturing, transportation, and installation.

Shims provide a practical method for making controlled adjustments without modifying the concrete components.

Accurate Leveling

ABS shims help installers establish the correct elevation at designated contact points.

Consistent Joint Spacing

Shims can help maintain uniform spacing between adjoining concrete components.

Impact Resistance

ABS offers toughness and resistance to cracking during normal handling and installation.

Dimensional Consistency

Rigid plastic shims provide consistent thicknesses for installation adjustments.

Moisture Resistance

ABS does not swell from moisture exposure in the same manner as wood, although environmental suitability must be evaluated.

Noncorrosive Construction

ABS will not rust, making it useful in environments where metal corrosion is a concern.

Installation Efficiency

Precut shims can reduce field preparation time and allow installers to make adjustments quickly.

ABS Shims vs. HDPE, Polyethylene & HIPS Shims

Williams Products offers multiple plastic shim materials for different concrete construction requirements.

Feature ABS Shims HDPE Shims
Polyethylene
Shims
HIPS Shims

Material
Acrylonitrile
Butadiene
Styrene
High-Density
Polyethylene
Polyethylene
High Impact
Polystyrene

General
Rigidity
Rigid
Grade
Dependent
Grade
Dependent
Relatively Rigid

Impact
Resistance
Generally Good Generally Good
Grade
Dependent
Modified for
Improved Impact
Resistance

Moisture
Absorption
Low Very Low Very Low Low

Corrosion
Resistance
Noncorrosive Noncorrosive Noncorrosive Noncorrosive

Dimensional
Consistency
Good Good Good Good

Custom
Fabrication
Yes Yes Yes Yes

Primary Use
Leveling, Spacing
& Alignment
Leveling, Spacing
& Alignment
Leveling, Spacing
& Alignment
Leveling, Spacing
& Alignment

Permanent
Structural Use
Requires
Engineering
Verification
Requires
Engineering
Verification
Requires
Engineering
Verification
Requires
Engineering
Verification

ABS shims are a practical option for applications requiring rigid, impact-resistant plastic shims with consistent thicknesses.

The appropriate shim material should be selected based on loading, environmental conditions, long-term creep, and project specifications.

Material Specifications

Property Specification

Product Name ABS Plastic Shims

Material Acrylonitrile Butadiene Styrene

Material Type Engineering Thermoplastic

Primary Function Leveling, Alignment, Spacing & Positioning

Moisture Resistance Low Water Absorption

Corrosion Resistance Noncorrosive

Available Forms Individual Shims, Strips & Custom-Cut Pieces

Available Thicknesses Multiple Options – Contact Williams Products

Available Dimensions Standard & Custom Sizes

Fabrication Precision Cutting & Specialty Shapes

Primary Markets Concrete, Precast Concrete, Masonry & Building Construction

Specific ABS resin grade, compressive properties, impact resistance, dimensional tolerances, temperature limitations, UV resistance, and creep performance should be confirmed from the current material technical data sheet. Permanent load-bearing use requires engineering approval.

Custom ABS Shim Fabrication

Williams Products understands that concrete contractors and precast manufacturers require consistent dimensions and dependable materials.

We can supply ABS shims in configurations tailored to project requirements.

Custom fabrication options include:

  • Rectangular leveling shims
  • Square ABS shims
  • Custom thicknesses
  • Precut spacing strips
  • Specialty shim dimensions
  • Custom lengths and widths
  • Project-specific configurations
  • Production quantities for precast manufacturers
  • Specialty shapes for concrete installation

Whether you need shims for architectural precast installation, concrete panel leveling, or general construction alignment, Williams Products can assist with your requirements.

Material selection should be based on the applicable project plans, engineering requirements, load conditions, environmental exposure, and intended application. MIL-C882 and AASHTO references should be verified against the current project specification before material is supplied or installed.

Sectors

Information

Contact us

Need Everlastic® SBR Waterstop?

Contact Williams Products for pricing, availability, specifications, and custom fabrication options.

Send us a message

"*" indicates required fields