Concrete
Concrete
Everlastic® EVA200G
Closed-Cell EVA Foam for Concrete, Bridge & Highway Construction
Williams Products EVA200G is a durable, closed-cell EVA foam engineered for demanding concrete and infrastructure applications where flexibility, resilience, and moisture resistance are required.
EVA200G is approved for NYSDOT Specification 705-08, making it an excellent choice for New York transportation, bridge, highway, and structural concrete projects requiring an approved preformed closed-cell foam material.
NYSDOT 705-08 Approved
For contractors, engineers, precasters, and distributors working on New York State transportation projects, material approval matters.
Williams Products EVA200G is approved for use under NYSDOT 705-08 – Preformed, Closed-Cell Foam Material.
NYSDOT 705-08 covers closed-cell foam material used primarily as a joint seal in structural expansion joint systems. The specification addresses material performance in demanding transportation environments where the joint material may be exposed to movement, moisture, road salts, and petroleum products.
EVA200G gives contractors and suppliers a dependable option when a project calls for material meeting NYSDOT 705-08 requirements.
Designed for Structural Expansion Joints
Concrete and bridge structures are constantly subjected to movement caused by temperature changes, traffic loading, expansion, contraction, and other environmental conditions.
EVA200G provides a resilient closed-cell foam material that can be incorporated into structural expansion joint systems to help accommodate this movement while maintaining separation and supporting proper joint performance.
Its combination of flexibility, resilience, and closed-cell construction makes EVA200G particularly well suited for demanding highway and infrastructure environments.
Key Features & Benefits
- Approved for NYSDOT Specification 705-08
- Closed-cell EVA foam construction
- Designed for structural expansion joint applications
- Suitable for concrete, bridge, highway, and infrastructure construction
- Flexible and resilient
- Low moisture absorption
- Helps accommodate joint movement
- Suitable for demanding exterior environments
- Resistant to common environmental exposure encountered in transportation construction
- Can be fabricated to project-specific dimensions
- Available from Williams Products for contractors, distributors, precasters, and infrastructure suppliers
Built for Concrete & Infrastructure Construction
EVA200G is especially suited for applications where ordinary foam materials may not provide the performance required for long-term exposure and structural movement.
Typical applications include:
- Bridge expansion joint systems
- Structural concrete expansion joints
- Highway construction
- Bridge construction and rehabilitation
- Concrete infrastructure
- Transportation structures
- Concrete joint systems
- Precast concrete construction
- Municipal infrastructure projects
- NYSDOT construction projects
Closed-Cell Performance
The closed-cell structure of EVA200G helps provide the combination of resilience and moisture resistance required in demanding concrete and transportation applications.
Unlike open-cell materials that can readily absorb water, closed-cell EVA helps limit moisture penetration while maintaining its ability to compress and recover.
This is particularly important in bridge, highway, and exterior concrete construction, where joint materials can be exposed to water, freeze-thaw conditions, road salts, petroleum products, and repeated structural movement.
Made for Bridge & Highway Environments
Expansion joints in transportation structures must perform under conditions that can be considerably more demanding than typical building construction.
EVA200G is designed for applications where the joint material may encounter:
Traffic Loading | Temperature Changes | Expansion & Contraction | Moisture | Road Salts | Petroleum Exposure | Repeated Joint Movement
For NYSDOT applications, Specification 705-08 requires the preformed closed-cell foam material to remain unaffected by road salts and petroleum products and to be capable of maintaining a waterproof joint through the specified compression and tension range.
Fabricated to Your Project Requirements
Williams Products specializes in converting and fabricating foam and rubber materials for the concrete, bridge, highway, precast, and construction industries.
EVA200G can be fabricated to meet project-specific dimensional requirements, allowing customers to receive material ready for their particular joint or construction application.
Contact us with your required thickness, width, length, configuration, and quantity for pricing and availability.
Industries & Markets Served
Bridge Construction | Highway Construction | NYSDOT Projects | Structural Concrete | Precast Concrete | Transportation Infrastructure | Municipal Construction | Concrete Rehabilitation
Specify EVA200G for NYSDOT 705-08 Applications
When your New York transportation project requires a preformed closed-cell foam material approved for NYSDOT 705-08, specify Williams Products EVA200G.
Whether you’re a contractor bidding a NYSDOT project, a distributor supplying bridge and highway materials, or a precaster working on transportation infrastructure, Williams Products can provide fabricated EVA200G material to meet your project requirements.
Material selection should be based on the applicable project plans, engineering requirements, load conditions, environmental exposure, and intended application. MIL-C-882 and AASHTO references should be verified against the current project specification before material is supplied or installed.
Sectors
Information
Tech data/spec sheet
Safety data sheet
Cut sheet
Contact us
Need Everlastic® EVA200G?
Contact Williams Products for pricing, availability, specifications, and custom fabrication options.
Send us a message
"*" indicates required fields