Masonry
Masonry
Everlastic® Econ-O-Foam
Flexible Masonry Expansion & Isolation Joint Filler with an Inherent Bond Breaker
EVERLASTIC® Econ-O-Foam from Williams Products is a flexible, lightweight expansion and isolation joint filler designed for masonry, concrete, and building construction applications.
A major advantage of Econ-O-Foam is its inherent bond-breaking properties, allowing the material to function as both a compressible joint filler and a bond breaker within properly designed sealant joints.
This makes EVERLASTIC® Econ-O-Foam an excellent choice for applications where brick, block, stone, concrete, precast, and other building components require separation while maintaining a properly designed sealant joint at the exposed surface.
Joint Filler + Inherent Bond Breaker
EVERLASTIC® Econ-O-Foam provides two important functions within a properly designed masonry joint:
1. Compressible Joint Filler
Econ-O-Foam fills the joint and provides separation between adjoining construction materials.
2. Inherent Bond Breaker
The foam surface helps prevent unwanted sealant adhesion to the bottom of the joint.
This is important because elastomeric sealants are generally designed to adhere to the two opposing sides of a joint, allowing the sealant to stretch and compress as the joint moves.
Bonding to the bottom of the joint can create three-sided adhesion, which may restrict the sealant’s ability to accommodate movement.
By functioning as an inherent bond breaker, Econ-O-Foam helps support proper sealant joint design.
Masonry Expansion & Isolation Joints
Masonry and adjoining construction materials naturally experience movement caused by:
- Temperature changes
- Moisture conditions
- Drying shrinkage
- Building movement
- Structural movement
- Loading
- Expansion and contraction
EVERLASTIC® Econ-O-Foam provides a flexible separation between adjoining materials, allowing movement to occur at the designed joint rather than creating direct rigid contact between building components.
Key Features & Benefits
- Flexible expansion and isolation joint filler
- Inherent bond breaker
- Helps prevent three-sided sealant adhesion
- Supports proper sealant joint geometry
- Compressible and resilient
- Lightweight and easy to handle
- Flexible for curves and irregular surfaces
- Easy to cut and install
- Provides separation between adjoining materials
- Useful for masonry-to-concrete interfaces
- Suitable for interior and exterior construction
- Available in multiple thicknesses and widths
- Custom fabricated by Williams Products
Helps Prevent Three-Sided Sealant Adhesion
Proper sealant joint design is an important part of masonry construction.
In a typical moving joint, sealant should adhere to the two opposing sides of the joint while remaining free from adhesion at the bottom.
This allows the sealant to stretch and compress as the joint opens and closes.
When sealant adheres to the bottom of the joint, it creates three-sided adhesion, which can restrict movement and place additional stress on the sealant.
EVERLASTIC® Econ-O-Foam’s inherent bond-breaking properties help prevent unwanted adhesion at the bottom of the sealant joint.
The Goal:
Two-Sided Adhesion = Sealant Can Move
Three-Sided Adhesion = Sealant Movement Can Be Restricted
This makes Econ-O-Foam more than simply a material used to fill an empty space. It becomes an important component of the overall joint assembly.
Masonry-to-Concrete Isolation
One of the most common applications for EVERLASTIC® Econ-O-Foam is providing separation where masonry meets concrete.
Brick, block, concrete, and other building materials can move independently due to temperature, moisture, shrinkage, and loading.
Econ-O-Foam provides a compressible isolation layer between these materials.
Typical applications include:
- Brick-to-concrete interfaces
- CMU-to-concrete interfaces
- Masonry walls adjacent to concrete slabs
- Masonry-to-foundation joints
- Masonry-to-precast interfaces
- Building perimeter joints
- Concrete flatwork adjacent to masonry
Building Perimeter Isolation
Concrete sidewalks, slabs, patios, and other flatwork frequently terminate against exterior masonry walls.
These components should be properly separated where an isolation joint is required.
EVERLASTIC® Econ-O-Foam can provide a flexible separation between the concrete flatwork and building structure.
Typical applications include:
- Sidewalks against brick walls
- Sidewalks against CMU walls
- Concrete slabs against buildings
- Entrance slabs
- Concrete aprons
- Patios
- Exterior plazas
- Walkways
- Concrete paving
- Building perimeter joints
Where the exposed joint requires sealant, Econ-O-Foam’s inherent bond-breaking properties can provide an additional advantage.
Isolation Around Columns
Columns are another common location where an isolation joint may be required.
Concrete slabs and floors placed around structural columns can require separation to allow the surrounding concrete to move independently.
EVERLASTIC® Econ-O-Foam can be installed around:
- Concrete columns
- Masonry columns
- Structural steel columns
- Column bases
- Interior floor slabs
- Exterior slabs
- Industrial floors
Its flexibility allows the material to conform around columns and other structural components.
Flexible for Curves & Irregular Construction
Rigid expansion joint materials can be difficult to install around curves and irregular building configurations.
EVERLASTIC® Econ-O-Foam is flexible, allowing it to conform more easily to:
- Circular columns
- Curved masonry walls
- Radius concrete work
- Curved sidewalks
- Architectural concrete
- Landscape walls
- Circular structures
- Irregular building configurations
This flexibility can reduce field cutting and simplify installation.
Interior Masonry & Floor Applications
Econ-O-Foam can also be used for appropriate interior isolation joints where concrete floors meet masonry walls, columns, and other structural components.
Typical applications include:
- Concrete floors against CMU walls
- Slab-to-wall isolation
- Slabs around columns
- Interior masonry walls
- Warehouse floors
- Commercial floors
- Institutional buildings
- Industrial floors
- Manufacturing facilities
Foundations & Structural Interfaces
Masonry walls frequently interface with foundations, structural concrete, precast components, and other building systems.
EVERLASTIC® Econ-O-Foam can provide a compressible separation at appropriate locations between these materials.
Applications can include:
- Foundation walls
- Masonry-to-concrete interfaces
- Precast-to-masonry interfaces
- Structural columns
- Building perimeter conditions
- Architectural concrete
- Structural transitions
Sealant Joint Applications
When Econ-O-Foam is used beneath an elastomeric sealant, the material can help establish the joint configuration while providing an inherent bond-breaking surface beneath the sealant.
A typical joint assembly may include:
Masonry / Concrete → EVERLASTIC® Econ-O-Foam → Elastomeric Sealant
The exact sealant depth, joint width, recess, and installation requirements should always follow the project specifications and sealant manufacturer’s recommendations.
Lightweight & Contractor Friendly
EVERLASTIC® Econ-O-Foam is designed to be easy to work with on the jobsite.
Its lightweight, flexible construction makes the material easy to:
- Carry
- Position
- Cut
- Fit
- Bend
- Install
For contractors working on long building perimeters or large concrete and masonry projects, easier handling can help reduce installation time compared with heavier or more rigid joint filler materials.
Typical Masonry Applications
EVERLASTIC® Econ-O-Foam is well suited for applications including:
- Masonry expansion joints
- Masonry isolation joints
- Brick-to-concrete isolation
- CMU-to-concrete isolation
- Masonry-to-precast interfaces
- Building perimeter joints
- Sidewalk-to-building joints
- Slab-to-wall joints
- Foundation isolation
- Column isolation
- Concrete floors adjacent to masonry
- Entrance slabs
- Exterior plazas
- Curved construction
- Radius applications
- Sealant joint assemblies
Industries & Markets Served
Masonry Construction | Brick Construction | Concrete Masonry | Concrete Construction | Commercial Construction | Institutional Construction | Industrial Construction | Architectural Masonry | Municipal Construction | Multi-Family Construction
Why Choose EVERLASTIC® Econ-O-Foam?
EVERLASTIC® Econ-O-Foam provides contractors and distributors with a practical solution for masonry expansion and isolation joints.
Its combination of:
Expansion Joint Filler | Isolation | Flexibility | Compressibility | Lightweight Handling | Inherent Bond Breaker
makes Econ-O-Foam particularly useful in sealed masonry-to-concrete joints.
The inherent bond breaker is an important advantage because the material can provide the required joint separation while also helping prevent unwanted sealant adhesion to the bottom of the joint.
For contractors, this means one material can help address both joint filling and proper sealant joint configuration.
Product selection should be based on project requirements, design conditions, environmental exposure, and applicable project specifications. ASTM D1056 classification does not by itself indicate suitability for every application.
Sectors
Information
Tech data/spec sheet
Safety data sheet
Cut sheet
Contact us
Need Everlastic® Econ-O-Foam for Your Project?
Williams Products provides quality cellular rubber materials and custom fabrication for concrete and construction applications. Contact us for pricing, availability, and custom fabrication options.
Send us a message
"*" indicates required fields