Williams Products

Precast

Precast

EVERLASTIC® NN1-C – ASTM D1056 2C1 Closed Cell Neoprene Sponge

High-Performance Closed Cell Neoprene Sponge for Precast Concrete Construction

Reliable Sealing, Cushioning & Joint Isolation for Precast Concrete Applications

Williams Products’ EVERLASTIC® NN1-C is a soft, flexible closed cell neoprene sponge rubber designed to meet ASTM D1056 2C1 material requirements. Engineered for applications requiring compressibility, resilience, and resistance to oil exposure, NN1-C provides a versatile solution for sealing, cushioning, and isolation in precast concrete construction.

Unlike ASTM D1056 2A1 materials, which are classified under the standard’s non-oilresistant category, ASTM D1056 2C1 materials are classified for applications requiring oil resistance.

This makes EVERLASTIC® NN1-C an excellent option for precast concrete applications where soft compression characteristics, moisture resistance, and additional resistance to oils and certain industrial contaminants are desired.

From precast wall panels and box culverts to utility structures, sound walls, and wastewater treatment facilities, NN1-C provides dependable cushioning and joint isolation in a variety of concrete construction environments.

Available in custom-cut strips, pads, sheets, and fabricated configurations, EVERLASTIC® NN1-C can be supplied to meet the dimensional requirements of precast manufacturers, contractors, and construction projects.

Key Features & Benefits

  • ASTM D1056 2C1 Classification: Soft, closed cell cellular rubber classified for applications requiring oil resistance.
  • Closed Cell Construction: Helps resist moisture absorption and water penetration through the sponge material.
  • Excellent Compressibility: Conforms to uneven concrete surfaces and accommodates dimensional variations between precast components.
  • Oil Resistance: Offers an advantage over ASTM D1056 Type A materials where incidental oil exposure may occur.
  • Flexible & Resilient: Provides cushioning and helps accommodate minor movement caused by thermal expansion, contraction, and structural settlement.
  • Neoprene Rubber Composition: Offers resistance to weathering, ozone, and environmental exposure.
  • Vibration & Sound Dampening: Helps reduce vibration transmission and contact noise between adjoining concrete components.
  • Custom Fabrication: Available in strips, pads, gaskets, and die-cut configurations to simplify installation and reduce material waste.

Typical Precast Concrete Applications

1. Precast Box Culverts & Drainage Structures

Precast box culverts and drainage structures require compressible materials capable of accommodating dimensional tolerances while providing cushioning and isolation between adjoining concrete sections.

EVERLASTIC® NN1-C can be considered for applications where a soft, oil-resistant closed cell sponge material is specified.

Common applications include:

  • Compressible joint fillers between precast sections
  • Cushioning between adjoining concrete components
  • Isolation strips at concrete contact points
  • Secondary joint sealing components
  • Compressible materials for drainage structure assemblies
  • Joint cushioning in industrial drainage applications

NN1-C’s soft compression characteristics allow it to conform to variations in mating concrete surfaces, while its closed cell structure helps limit moisture absorption.

Its ASTM D1056 Type C classification provides an additional benefit where incidental exposure to oils or industrial contaminants is anticipated.

For PENNDOT box culverts or other DOT projects requiring approved ASTM D1056 2C2 sponge materials, Williams Products offers alternative products specifically intended for those requirements.

2. Precast Concrete Wall Panels

Precast concrete wall panels require appropriate cushioning and isolation materials to accommodate manufacturing tolerances, installation variations, and minor movement between components.

EVERLASTIC® NN1-C provides a soft, compressible barrier between adjoining panels.

Typical applications include:

  • Vertical and horizontal panel joints
  • Compressible isolation strips
  • Perimeter cushioning around precast panels
  • Separation material between adjoining concrete elements
  • Concrete-to-steel contact cushioning
  • Nonstructural joint protection

Its soft compression characteristics help the material conform to irregular surfaces while providing a flexible separation layer between adjoining components.

3. Architectural Precast Concrete

Architectural precast panels and decorative concrete components often require cushioning materials that help protect adjoining surfaces while accommodating minor movement.

EVERLASTIC® NN1-C can be incorporated into:

  • Architectural wall panel joints
  • Precast façade assemblies
  • Decorative concrete elements
  • Panel-to-panel contact locations
  • Non-load-bearing isolation applications
  • Concrete-to-metal interfaces

The material’s closed cell structure and flexibility make it suitable for consideration in applications requiring compressible cushioning and resistance to moisture exposure.

4. Precast Utility Vaults & Underground Structures

Precast utility vaults, electrical enclosures, telecommunications structures, and underground concrete assemblies frequently require compressible materials for cushioning and joint isolation.

Applications include:

  • Utility vault section joints
  • Concrete lid and cover cushioning
  • Access panel isolation
  • Non-pressure-rated gasket applications
  • Isolation strips between precast components
  • Cushioning at concrete-to-steel interfaces

EVERLASTIC® NN1-C offers a combination of moisture resistance, soft compressibility, and oil resistance that can be beneficial in utility and underground construction environments.

For joints requiring a watertight or pressure-rated seal, the complete joint design and sealing material must be evaluated separately.

5. Precast Wastewater Treatment & Industrial Concrete Structures

Precast wastewater treatment facilities and industrial concrete structures often require materials capable of functioning in environments where moisture, oils, and other contaminants may be present.

EVERLASTIC® NN1-C can be considered for nonstructural cushioning and isolation applications within these facilities.

Typical applications include:

  • Precast wastewater treatment structures
  • Industrial utility vaults
  • Concrete equipment enclosures
  • Compressible isolation strips
  • Concrete-to-metal cushioning
  • Non-pressure-rated access cover gaskets
  • Secondary joint sealing components

Its ASTM D1056 Type C classification makes NN1-C particularly relevant where oil resistance is an important material-selection consideration.

Important: Oil resistance does not establish compatibility with all chemicals found in wastewater or industrial environments. Chemical exposure, concentration, temperature, and duration should be evaluated before selecting the material.

6. Precast Sound Walls & Highway Barriers

Precast sound wall systems and highway barrier assemblies often incorporate compressible materials to accommodate dimensional tolerances, minimize direct contact, and help reduce vibration transmission.

EVERLASTIC® NN1-C may be used for:

  • Cushioning between precast sound wall panels
  • Isolation between concrete components
  • Compressible strips at panel interfaces
  • Vibration and contact noise reduction
  • Nonstructural joint protection
  • Concrete-to-steel interface cushioning

Its soft compression characteristics make it useful where a flexible material is needed to conform to adjoining surfaces.

For PENNDOT sound walls or other DOT projects, Williams Products can assist in identifying materials that meet the applicable project specifications and approvedmaterial requirements.

Why ASTM D1056 2C1 Closed Cell Neoprene Sponge Is Important in Precast
Construction

Precast concrete components are manufactured under controlled conditions, but field installation introduces dimensional tolerances, uneven contact surfaces, temperature changes, and minor structural movement.

Without appropriate cushioning or isolation materials, adjoining concrete components may experience concentrated contact, unwanted vibration, or joint deterioration.

EVERLASTIC® NN1-C helps address these challenges by providing a soft, compressible layer between components.

Its ASTM D1056 2C1 classification combines Grade 1 compression characteristics with Type C oil-resistance requirements, making it a useful alternative to conventional Type A closed cell sponge materials in applications where incidental oil exposure is a concern.

The material’s flexibility, resilience, and closed cell construction make it a versatile option for a variety of precast concrete applications.

Understanding the Difference Between NN1, NN1-C, NN2 & NN3

Williams Products offers multiple grades of EVERLASTIC® closed cell neoprene sponge to accommodate different compression and environmental requirements.

Product
ASTM
Classification
Relative
Firmness
Key Characteristic

EVERLASTIC®
NN1
ASTM D1056 2A1 Soft
General-purpose cushioning and isolation

EVERLASTIC®
NN1-C
ASTM D1056 2C1 Soft
Cushioning and isolation with oilresistance requirements

EVERLASTIC®
NN2
ASTM D1056 2A2 Medium-Soft Increased compression resistance

EVERLASTIC®
NN3
ASTM D1056 2A3 Medium-Firm
Firmer cushioning and increased compression resistance

Why choose NN1-C?

EVERLASTIC® NN1-C is an excellent option when an application requires the soft compression characteristics associated with Grade 1 cellular rubber along with the oilresistance classification of ASTM D1056 Type C.

This makes NN1-C particularly useful for consideration in industrial precast concrete applications, utility structures, and other assemblies where incidental oil exposure may occur.

The appropriate material should always be selected based on the anticipated compression, movement, environmental exposure, and applicable project specifications.

Material Specifications

Property Specification

Product Name EVERLASTIC® NN1-C

Material Closed Cell Neoprene Sponge Rubber

ASTM Classification ASTM D1056 2C1

Cell Structure Closed Cell

Material Type Cellular Rubber

Compression Characteristics Soft

Compression-Deflection
Classification
ASTM D1056 Grade 1

Oil Resistance Classification ASTM D1056 Type C

Available Forms Sheets, Strips, Pads & Custom Gaskets

Fabrication Custom Die-Cutting, Slitting & Cutting

Primary Markets
Precast Concrete, Highway, Bridge, Utility, Wastewater &
Industrial Construction

Specific physical properties, tolerances, compression-deflection values, oil-resistance test results, and other performance characteristics should be confirmed using the current
EVERLASTIC® NN1-C technical data sheet. Suitability for watertight, structural, loadbearing, chemical-exposure, or specification-controlled applications must be verified for the intended use.

Custom Fabrication for Precast Manufacturers

At Williams Products, we understand that precast concrete manufacturers require consistent dimensions, dependable materials, and products that are ready for installation.

We offer EVERLASTIC® NN1-C in a variety of fabricated configurations, including:

  • Custom-width sponge strips
  • Continuous-length cushioning and isolation strips
  • Die-cut gaskets
  • Custom-sized isolation pads
  • Sheet material
  • Specialty shapes for precast assemblies

Our fabrication capabilities help precast manufacturers minimize cutting and preparation time while maintaining consistency throughout production.

Whether you require a small quantity for a specialized project or production quantities for ongoing precast manufacturing, Williams Products can assist with your material requirements.

EVERLASTIC® NN1-C — Soft, Oil-Resistant Closed Cell Neoprene Sponge Solutions for the Precast Concrete Industry.

Product selection should be based on project requirements, design conditions, environmental exposure, and applicable project specifications. ASTM D1056 classification does not by itself indicate suitability for every application.

Sectors

Information

Contact us

Need EVERLASTIC® NN1-C for Your Project?

Williams Products provides quality cellular rubber materials and custom fabrication for concrete and construction applications. Contact us for pricing, availability, and custom fabrication options.

Send us a message

"*" indicates required fields