Williams Products

Masonry

Masonry

Everlastic® 1320 Open Cell Urethane

Open-Cell Urethane Foam for Masonry Construction

EVERLASTIC® 1320 from Williams Products is a soft, flexible, and highly compressible open-cell urethane foam designed for cushioning, joint filling, sealant backing, isolation, and custom-fabricated applications throughout brick, block, stone, precast, and masonry construction.

The open-cell structure of EVERLASTIC® 1320 allows the material to compress easily and conform to irregular surfaces and joint configurations, making it particularly useful in masonry applications where a soft, adaptable foam material is required.

Williams Products can fabricate EVERLASTIC® 1320 into strips, pads, gaskets, fillers, and custom shapes to meet the specific dimensional requirements of your masonry project.

Why Open-Cell Urethane for Masonry Construction?

Masonry construction contains numerous joints, gaps, transitions, and interfaces where a soft and compressible material can be beneficial.

Unlike firmer closed-cell sponge materials, open-cell urethane compresses easily and conforms readily to variations in the joint or surrounding construction.

This makes EVERLASTIC® 1320 particularly useful for applications involving:

  • Irregular joint openings
  • Vertical masonry joints
  • Sealant backing
  • Cushioning
  • Isolation
  • Gap filling
  • Building transitions
  • Custom fabricated components

The material’s ability to compress and recover allows it to accommodate variations that can be difficult to address with a more rigid material.

Key Features & Benefits

  • Open-cell urethane foam
  • Soft and highly compressible
  • Easily conforms to irregular joints and surfaces
  • Flexible and resilient
  • Excellent cushioning characteristics
  • Useful as sealant backing in appropriate applications
  • Helps control sealant depth
  • Provides support behind sealant
  • Useful for isolation and separation applications
  • Lightweight and easy to handle
  • Easily cut and fabricated
  • Available in custom thicknesses, widths, and lengths
  • Custom fabricated by Williams Products

Sealant Backing for Masonry Joints

One of the most important uses for open-cell urethane foam in masonry construction is as a backup material behind sealants.

Backup materials are used in masonry joints to help:

  • Control sealant depth
  • Support the sealant during installation
  • Facilitate proper tooling
  • Help resist sealant indentation and sag
  • Maintain the desired joint configuration

Because open-cell urethane is highly compressible, it can conform well to irregular masonry joint openings.

This can be especially useful in vertical joints where joint dimensions may vary because of construction tolerances.

Highly Compressible for Irregular Joints

Masonry joints are not always perfectly uniform.

Variations in brick, block, mortar, concrete, and field installation can create joint openings that change in width or depth.

The soft open-cell structure of EVERLASTIC® 1320 allows the material to compress and conform to these irregular conditions.

This provides an advantage in applications where a firmer material may be more difficult to install or may not conform as readily to the surrounding surfaces.

Masonry Control Joints

Concrete masonry walls experience movement caused by drying shrinkage, temperature changes, moisture conditions, and normal building movement.

Properly designed control joints allow this movement to occur at predetermined locations.

EVERLASTIC® 1320 can be used as a compressible backup or filler material in appropriate masonry control-joint assemblies.

Typical applications include:

  • CMU control joints
  • Concrete block walls
  • Vertical masonry joints
  • Interior masonry partitions
  • Commercial masonry
  • Institutional masonry
  • Industrial construction

Where sealant is incorporated into the joint, the backup material can help establish and maintain the proper sealant depth.

Brick & Masonry Expansion Joints

EVERLASTIC® 1320 can also be considered for appropriate vertical brick and masonry expansion-joint applications where a soft, highly compressible foam material is desired.

Applications can include:

  • Brick expansion joints
  • Masonry expansion joints
  • Vertical building joints
  • Brick-to-concrete interfaces
  • Masonry-to-precast interfaces
  • Wall transitions
  • Joints between dissimilar building materials

The open-cell structure allows the foam to compress readily as the adjoining materials move.

Helps Control Sealant Depth

Proper sealant geometry is critical to the performance of a masonry joint.

Installing too much sealant does not necessarily produce a better joint. The sealant needs to be installed at the proper depth and configuration so it can respond to movement.

EVERLASTIC® 1320 can be installed behind the sealant to help establish the required sealant depth and support the sealant during installation.

This can also help reduce the amount of sealant required to fill a deep masonry joint.

Always follow the sealant manufacturer’s recommendations regarding joint dimensions, backing materials, primers, and compatibility.

Airflow & Sealant Curing

The open-cell structure of urethane foam allows air to move through the material.

In certain sealant applications, this can be an important advantage.

Open-cell urethane backup materials are often used with one-component sealants in vertical joints where exposure to air from behind the sealant can assist the curing process.

This is one reason open-cell urethane can be a useful alternative to closed-cell backup materials for certain vertical masonry sealant applications.

Sealant compatibility and installation requirements should always be confirmed with the sealant manufacturer.

Masonry-to-Concrete Interfaces

Masonry walls frequently meet concrete and precast structural components.

EVERLASTIC® 1320 can provide a soft, compressible separation or cushioning material at appropriate interfaces between building components.

Typical applications can include:

  • Masonry-to-concrete joints
  • Masonry-to-precast interfaces
  • Concrete columns
  • Structural walls
  • Interior partitions
  • Building transitions
  • Architectural components

Its high compressibility allows the material to conform to variations between adjoining surfaces.

Window, Door & Building Openings

Masonry openings create numerous transitions between brick or block and other building materials.

EVERLASTIC® 1320 can be fabricated into strips, pads, fillers, and gaskets for appropriate applications around:

  • Windows
  • Doors
  • Louvers
  • Wall penetrations
  • Architectural components
  • Precast components
  • Interior partitions
  • Building transitions

The soft, conformable nature of open-cell urethane makes it particularly useful where the surrounding surfaces are irregular.

Cushioning & Isolation Applications

EVERLASTIC® 1320 is not limited to sealant joints.

Its soft cellular structure also makes it useful as a cushioning, isolation, and separation material between building components.

Williams Products can fabricate 1320 into components for applications requiring:

  • Soft cushioning
  • Component separation
  • Gap filling
  • Vibration cushioning
  • Protection between adjoining surfaces
  • Compressible spacers
  • Custom foam gaskets

Open-Cell vs. Closed-Cell Foam

Choosing between open-cell and closed-cell materials depends on the application.

Open-cell urethane, such as EVERLASTIC® 1320, is generally softer and more easily compressed. It can conform particularly well to irregular joint conditions and allows air movement through the material.

Closed-cell materials generally provide greater resistance to water absorption and may be preferred where moisture exposure is a primary concern.

For this reason, EVERLASTIC® 1320 is particularly well suited for appropriate vertical and protected masonry applications where high compressibility and conformability are important.

The project specification, joint location, expected moisture exposure, and sealant manufacturer’s recommendations should always be considered when selecting a backup or joint filler material.

Custom Fabricated for Masonry Construction

Williams Products specializes in converting and fabricating foam and rubber materials for the construction industry.

EVERLASTIC® 1320 can be slit, cut, and fabricated specifically for your masonry application.

Material can be supplied to your required:

  • Thickness
  • Width
  • Length
  • Shape
  • Quantity

Instead of cutting bulk sheets of foam on the jobsite, contractors, distributors, and manufacturers can order EVERLASTIC® 1320 in ready-to-install strips and fabricated components.

Typical Masonry Applications

EVERLASTIC® 1320 can be considered for a variety of appropriate masonry and building construction applications, including:

  • Vertical masonry joints
  • Masonry control joints
  • Brick expansion joints
  • Sealant backing
  • Irregular joint openings
  • Masonry-to-concrete interfaces
  • Masonry-to-precast interfaces
  • Window and door openings
  • Architectural masonry
  • Interior masonry partitions
  • Building transitions
  • Custom cushioning
  • Compressible spacers
  • Custom fabricated foam components

Industries & Markets Served

Masonry Construction | Brick Construction | Concrete Masonry | Commercial Construction | Architectural Masonry | Precast Construction | Institutional Construction | Industrial Construction

Why Choose EVERLASTIC® 1320?

EVERLASTIC® 1320 provides masonry contractors, distributors, architects, and manufacturers with a soft, highly compressible open-cell urethane foam that can be fabricated for a wide range of construction applications.

Its primary advantages include:

High Compressibility | Conformability | Flexibility | Cushioning | Sealant Depth Control | Irregular Joint Filling | Custom Fabrication

For masonry applications with uneven or variable joint openings, the ability of open-cell urethane to compress and conform can provide a significant installation advantage.

Williams Products can fabricate EVERLASTIC® 1320 into strips, pads, fillers, gaskets, spacers, and custom components designed around your application.

Product selection should be based on project requirements, design conditions, environmental exposure, and applicable project specifications. ASTM D1056 classification does not by itself indicate suitability for every application.

Sectors

Information

Contact us

Need Everlastic® 1320 Open Cell Urethane for Your Project?

Williams Products provides quality cellular rubber materials and custom fabrication for concrete and construction applications. Contact us for pricing, availability, and custom fabrication options.

Send us a message

"*" indicates required fields