Williams Products

Precast

Precast

EVERLASTIC® NN3 – ASTM D1056 2A3 Closed Cell Neoprene Sponge

High-Performance Closed Cell Neoprene Sponge for Precast Concrete Construction

Durable Sealing, Cushioning & Joint Protection for Precast Concrete Applications

Williams Products’ EVERLASTIC® NN3 is a medium-firm closed cell neoprene sponge rubber designed to meet ASTM D1056 2A3 material requirements. Engineered for applications requiring increased compression resistance, resilience, and durability, NN3 provides an effective solution for cushioning, isolation, and joint protection in precast concrete construction.

Compared to softer closed cell sponge materials, EVERLASTIC® NN3 offers greater resistance to compression, making it particularly useful in precast assemblies where a firmer cushioning or isolation material is required.

From precast wall panels and box culverts to utility structures, sound walls, and architectural concrete components, NN3 provides dependable performance in applications where controlled compression, moisture resistance, and long-term material durability are important.

Available in custom-cut strips, pads, sheets, and fabricated configurations, EVERLASTIC®
NN3 can be supplied to meet the dimensional requirements of precast manufacturers, contractors, and construction projects.

Key Features & Benefits

  • ASTM D1056 2A3 Classification: Provides a firmer compression-deflection range than softer 2A1 and 2A2 cellular rubber materials.
  • Closed Cell Construction: Helps resist moisture absorption and water penetration through the sponge material.
  • Increased Compression Resistance: Suitable for applications requiring a firmer cushioning or isolation material.
  • Excellent Resilience: Helps maintain separation between adjoining components while accommodating limited movement and dimensional variations.
  • Neoprene Rubber Composition: Offers resistance to weathering, ozone, and environmental exposure.
  • Vibration & Sound Dampening: Helps reduce vibration transmission and contact noise between adjoining concrete components.
  • Durable Cushioning: Provides a compressible barrier that helps minimize direct concrete-to-concrete or concrete-to-steel contact.
  • Custom Fabrication: Available in strips, pads, gaskets, and die-cut configurations to simplify installation and reduce material waste.

Typical Precast Concrete Applications

1. Precast Box Culverts & Drainage Structures

Precast box culverts and drainage structures require materials capable of accommodating dimensional tolerances while providing cushioning and isolation between adjoining concrete sections.

EVERLASTIC® NN3 can be used in applications where a firmer closed cell sponge material is specified.

Common applications include:

  • Compressible joint fillers between precast sections
  • Cushioning between adjoining concrete components
  • Isolation strips at concrete contact points
  • Secondary joint sealing components
  • Compressible materials for drainage structure assemblies

NN3’s increased compression resistance makes it useful where a softer sponge material may compress excessively under the intended conditions.

Its closed cell construction also helps limit moisture absorption in applications exposed to damp or outdoor environments.

For PENNDOT box culverts or other DOT projects requiring approved ASTM D1056 2C2 sponge materials, Williams Products offers alternative products specifically intended for those requirements.

2. Precast Concrete Wall Panels

Precast concrete wall panels require appropriate cushioning and isolation materials to accommodate manufacturing tolerances, installation variations, and minor movement between components.

EVERLASTIC® NN3 provides a firmer compressible barrier between adjoining panels.

Typical applications include:

  • Vertical and horizontal panel joints
  • Compressible isolation strips
  • Perimeter cushioning around precast panels
  • Separation material between adjoining concrete elements
  • Concrete-to-steel contact cushioning

Its firmer compression characteristics can be beneficial where greater resistance to compression is desired while maintaining the flexibility of a cellular rubber material.

3. Architectural Precast Concrete

Architectural precast panels and decorative concrete components often require cushioning materials that help protect adjoining surfaces while maintaining consistent separation.

EVERLASTIC® NN3 can be incorporated into:

  • Architectural wall panel joints
  • Precast façade assemblies
  • Decorative concrete elements
  • Panel-to-panel contact locations
  • Non-load-bearing isolation applications
  • Concrete-to-metal interfaces

The material’s closed cell structure and compression resistance make it suitable for consideration in applications requiring durable cushioning and limited movement accommodation.

4. Precast Utility Vaults & Underground Structures

Precast utility vaults, electrical enclosures, telecommunications structures, and underground concrete assemblies frequently require compressible materials for cushioning and joint isolation.

Applications include:

  • Utility vault section joints
  • Concrete lid and cover cushioning
  • Access panel isolation
  • Non-pressure-rated gasket applications
  • Isolation strips between precast components
  • Cushioning at concrete-to-steel interfaces

EVERLASTIC® NN3 offers a combination of moisture resistance and firmer compressibility that can be beneficial in these environments.

For joints requiring a watertight or pressure-rated seal, the complete joint design and sealing material must be evaluated separately.

5. Precast Sound Walls & Highway Barriers

Precast sound wall systems and highway barrier assemblies often incorporate compressible materials to accommodate dimensional tolerances, minimize direct contact, and help reduce vibration transmission.

EVERLASTIC® NN3 may be used for:

  • Cushioning between precast sound wall panels
  • Isolation between concrete components
  • Compressible strips at panel interfaces
  • Vibration and contact noise reduction
  • Nonstructural joint protection
  • Concrete-to-steel interface cushioning

Its firmer compression characteristics may be advantageous in assemblies where the material must resist greater compressive forces than softer sponge grades.

Important: For PENNDOT sound walls or other DOT projects, Williams Products can assist in identifying materials that meet the applicable project specifications and approvedmaterial requirements.

6. Precast Concrete Buildings & Structural Assemblies

Precast building systems frequently require materials that provide separation, cushioning, and isolation between adjoining components.

EVERLASTIC® NN3 can be considered for:

  • Precast panel separation joints
  • Nonstructural isolation strips
  • Concrete-to-steel contact cushioning
  • Joint fillers between adjoining elements
  • Compressible material around penetrations and openings
  • Cushioning between non-load-bearing concrete components

Its increased compression resistance helps maintain separation in applications where softer cellular rubber materials may not provide the desired resistance.

NN3 should not be used as a structural bearing pad unless specifically evaluated and approved for the required loading conditions.

Why ASTM D1056 2A3 Closed Cell Neoprene Sponge Is Important in Precast
Construction

Precast concrete components are manufactured under controlled conditions, but field installation introduces dimensional tolerances, uneven contact surfaces, temperature changes, and minor structural movement.

Without appropriate cushioning or isolation materials, adjoining concrete components may experience concentrated contact, unwanted vibration, or joint deterioration.

EVERLASTIC® NN3 helps address these challenges by providing a firmer, compressible layer between components.

Unlike softer sponge grades, ASTM D1056 2A3 material offers increased compressiondeflection resistance, making it particularly useful where controlled compression and greater firmness are required.

Its closed cell neoprene composition provides a combination of resilience, moisture resistance, and durability for a wide range of precast applications.

Understanding the Difference Between NN1, NN2 & NN3

Williams Products offers multiple grades of EVERLASTIC® closed cell neoprene sponge to accommodate different compression requirements.

Product
ASTM
Classification
Relative
Firmness
Typical Application

EVERLASTIC®
NN1
ASTM D1056 2A1 Soft
Light-duty cushioning, sealing, and isolation

EVERLASTIC®
NN2
ASTM D1056 2A2 Medium-Soft
General-purpose cushioning and joint isolation

EVERLASTIC®
NN3
ASTM D1056 2A3 Medium-Firm
Firmer cushioning and applications requiring increased compression resistance

Why choose NN3?

EVERLASTIC® NN3 is an excellent option when an application requires more resistance to compression than NN1 or NN2 while retaining the flexibility and cushioning characteristics of closed cell neoprene sponge.

The appropriate grade should be selected based on the anticipated compression, movement, environmental conditions, and applicable project specifications.

Material Specifications

Property Specification

Product Name EVERLASTIC® NN3

Material Closed Cell Neoprene Sponge Rubber

ASTM Classification ASTM D1056 2A3

Cell Structure Closed Cell

Material Type Cellular Rubber

Compression Characteristics Medium-Firm

Compression-Deflection
Classification
ASTM D1056 Grade 3

Available Forms Sheets, Strips, Pads & Custom Gaskets

Fabrication Custom Die-Cutting, Slitting & Cutting

Primary Markets
Precast Concrete, Highway, Bridge, Building & Industrial
Construction

Specific physical properties, tolerances, compression-deflection values, and test results should be confirmed using the current EVERLASTIC® NN3 technical data sheet. Suitability for watertight, structural, load-bearing, or specification-controlled applications must be verified for the intended use.

Custom Fabrication for Precast Manufacturers

At Williams Products, we understand that precast concrete manufacturers require consistent dimensions, dependable materials, and products that are ready for installation.

We offer EVERLASTIC® NN3 in a variety of fabricated configurations, including:

  • Custom-width sponge strips
  • Continuous-length cushioning and isolation strips
  • Die-cut gaskets
  • Custom-sized isolation pads
  • Sheet material
  • Specialty shapes for precast assemblies

Our fabrication capabilities help precast manufacturers minimize cutting and preparation time while maintaining consistency throughout production.

Whether you require a small quantity for a specialized project or production quantities for ongoing precast manufacturing, Williams Products can assist with your material requirements.

Product selection should be based on project requirements, design conditions, environmental exposure, and applicable project specifications. ASTM D1056 classification does not by itself indicate suitability for every application.

Sectors

Information

Contact us

Need EVERLASTIC® NN3 for Your Project?

Williams Products provides quality cellular rubber materials and custom fabrication for concrete and construction applications. Contact us for pricing, availability, and custom fabrication options.

Send us a message

"*" indicates required fields