Williams Products

Precast

Precast

EVERLASTIC® BP-200 – ROF Bearing Pads for Precast Concrete Construction

Random Oriented Fiber (ROF) Bearing Pads | Precast Concrete Support | Load Distribution | Custom Fabrication

High-Performance ROF Bearing Pads for Precast Concrete Applications

Williams Products’ EVERLASTIC® BP-200 (Bear Pad 200) is a Random Oriented Fiber (ROF) bearing pad material designed for precast concrete construction applications requiring load distribution, resilient support, and separation between structural components.

Precast concrete structures frequently incorporate bearing pads between adjoining concrete elements to help distribute loads, accommodate minor surface irregularities, and provide a controlled bearing interface.

EVERLASTIC® BP-200 is designed for use in appropriately engineered precast concrete assemblies where an ROF bearing material is specified.

The material’s random fiber orientation provides reinforcement throughout the pad, distinguishing it from conventional solid neoprene bearing pads.

BP-200 can be fabricated into custom sizes and configurations for precast concrete manufacturers, general contractors, and specialty construction applications.

Whether used in precast wall panel assemblies, concrete beams, structural supports, or other precast connections, EVERLASTIC® BP-200 provides a practical bearing pad solution for projects requiring ROF material.

Key Features & Benefits

  • Random Oriented Fiber (ROF) Construction: Fiber-reinforced bearing pad material designed for appropriate precast concrete bearing applications.
  • Load Distribution: Helps distribute contact pressure between adjoining precast concrete components.
  • Resilient Bearing Interface: Provides a bearing layer between rigid structural elements.
  • Surface Irregularity Accommodation: Helps compensate for minor variations in precast concrete bearing surfaces.
  • Controlled Deformation: Provides bearing support with deformation characteristics dependent on pad dimensions and material properties.
  • Structural Separation: Reduces direct concrete-to-concrete and steel-to-concrete contact.
  • Custom Fabrication: Available in project-specific thicknesses, widths, and lengths.
  • Precast Industry Applications: Suitable for consideration in wall panels, structural components, and specialty precast assemblies.
  • Installation Convenience: Custom-cut pads can be supplied ready for placement at designated bearing locations.

Typical Precast Concrete Applications

1. Precast Concrete Wall Panels

Precast concrete wall panels frequently require bearing materials at designated support locations.

EVERLASTIC® BP-200 ROF Bearing Pads can be used where specified to provide a bearing interface between precast wall panels and supporting structural elements.

Typical applications include:

  • Precast concrete wall panel support points
  • Load-bearing precast wall assemblies
  • Architectural precast wall panels
  • Concrete panel-to-foundation bearing locations
  • Precast panel-to-concrete support interfaces
  • Engineered wall panel bearing connections

BP-200 helps provide a separation layer while distributing bearing pressure across the designed contact area.

Its fiber-reinforced construction makes it an option for precast applications requiring ROF bearing pad material.

2. Precast Concrete Beams & Structural Components

Precast concrete beams and other structural elements transfer loads through designated bearing locations.

EVERLASTIC® BP-200 can provide an ROF bearing interface between the precast component and its supporting structure.

Typical applications include:

  • Precast concrete beam bearing locations
  • Concrete beam-to-column interfaces
  • Precast structural support points
  • Concrete-to-concrete bearing connections
  • Engineered structural precast assemblies
  • Specialty load-bearing precast components

The bearing pad helps distribute contact pressure and accommodate minor bearing surface variations.

Pad selection and sizing must account for the specified loads, bearing stresses, and deformation requirements.

3. Precast Concrete Stair & Landing Assemblies

Precast concrete stair and landing systems may incorporate bearing pads at designated support locations.

EVERLASTIC® BP-200 can be considered for engineered applications such as:

  • Precast stair landing support points
  • Concrete stair-to-concrete bearing interfaces
  • Precast landing bearing locations
  • Structural precast stair assemblies
  • Specialty concrete support connections

The material provides separation between adjoining components and helps accommodate minor surface irregularities.

4. Precast Parking Structures

Precast parking structures frequently incorporate concrete beams, columns, double tees, and other structural components supported at engineered bearing locations.

Where ROF bearing materials are permitted by the project specifications, EVERLASTIC® BP200 can be considered for:

  • Precast parking garage components
  • Double-tee bearing locations
  • Precast beam support interfaces
  • Concrete-to-concrete bearing points
  • Structural precast parking assemblies
  • Specialty parking structure connections

These applications require engineering verification of bearing pressure, rotation, movement, pad geometry, and long-term deformation.

5. Precast Concrete Foundations & Support Assemblies

Precast foundations and structural support assemblies may require bearing materials to separate adjoining concrete or steel components.

Potential applications include:

  • Precast foundation bearing interfaces
  • Concrete pedestal support locations
  • Structural precast support pads
  • Precast-to-cast-in-place concrete interfaces
  • Specialty foundation connections
  • Engineered support assemblies

BP-200 provides an ROF material option for these applications when approved by the design engineer.

6. Utility Vaults & Specialty Precast Structures

Precast concrete manufacturers produce a wide variety of specialty products for utility, municipal, and infrastructure applications.

EVERLASTIC® BP-200 can be considered for designated bearing and cushioning applications in:

  • Precast utility vault assemblies
  • Specialty precast enclosures
  • Concrete support structures
  • Municipal precast products
  • Infrastructure components
  • Custom precast assemblies

The bearing material must be selected based on the intended load, exposure conditions, and project specifications.

7. Steel Sign Bases, Fence Posts & Specialty Precast Components

In addition to conventional precast structural applications, EVERLASTIC® BP-200 may be used as a separation or bearing pad in appropriately designed steel-to-concrete connections.

Potential applications include:

  • Steel sign bases mounted on concrete
  • Steel fence post base plates
  • Precast concrete sign foundations
  • Steel-to-precast concrete interfaces
  • Specialty post and support assemblies
  • Engineered equipment and structural base connections

These applications may benefit from a durable separation layer between steel components and concrete surfaces.

Where the pad carries structural loads, the connection must be evaluated for bearing stress, stability, anchorage, and other applicable design requirements.

Why ROF Bearing Pads Are Important in Precast Concrete Construction

Precast concrete is manufactured under controlled conditions and transported to construction sites for assembly.

Even with accurate manufacturing tolerances, minor variations can exist between adjoining bearing surfaces.

When rigid concrete components bear directly against one another, uneven contact may produce localized pressure concentrations.

Properly selected bearing pads help address these conditions by providing an engineered interface between structural elements.

Load Distribution

ROF bearing pads help distribute contact pressure across the designated bearing area, reducing direct contact between rigid concrete surfaces.

Accommodation of Surface Irregularities

Minor variations in concrete surface flatness can create uneven contact. A properly designed bearing pad can help accommodate these irregularities.

Structural Separation

Bearing pads create a separation layer between adjoining concrete or steel components, helping prevent direct hard-surface contact.

Controlled Bearing Performance

Bearing pad selection considers compressive behavior, deformation, pad geometry, loading, and movement requirements.

Precast Installation Efficiency

Custom-cut bearing pads can be supplied in the specified dimensions, helping precast manufacturers and erection contractors prepare components for installation.

ROF Bearing Pads vs. Conventional Neoprene Bearing Pads

Williams Products supplies multiple types of bearing pad materials for construction applications.

ROF bearing pads and conventional neoprene bearing pads differ in material construction and performance characteristics.

Feature EVERLASTIC® BP-200 ROF Solid Neoprene Bearing Pads

Material Construction
Random Oriented Fiber
Bearing Material
Solid Elastomeric Rubber

Internal Structure Fiber-Reinforced
Unreinforced Unless Otherwise
Specified

Typical Applications
Engineered Precast Bearing
Applications
Commercial or Specification-Driven
Bearing Applications

Load Distribution
Yes, When Properly
Designed
Yes, When Properly Designed

Deformation
Characteristics
Dependent on ROF Material
Properties
Dependent on Elastomer Properties and Geometry

Custom Fabrication Yes Yes

Material Selection Per Project Specification Per Project Specification

Important: ROF bearing pads and neoprene bearing pads are not automatically interchangeable. The appropriate material must be selected based on the engineer’s design requirements and verified physical properties.

Material Specifications

Property Specification

Product Name EVERLASTIC® BP-200 (Bear Pad 200)

Product Type ROF Bearing Pad

Material
Construction
Random Oriented Fiber Bearing Material

Primary Function Load Distribution & Structural Bearing Separation

Primary Industry Precast Concrete Construction

Common
Applications
Precast Panels, Beams, Stairs, Parking Structures & Specialty
Components

Available Forms Custom-Cut Bearing Pads

Available
Dimensions
Project-Specific Thicknesses, Widths & Lengths

Fabrication Custom Cutting & Specialty Shapes

Other Applications Steel Sign Bases, Fence Posts & Steel-to-Concrete Interfaces

Specific physical properties, compressive stress limits, deformation characteristics, temperature limitations, and applicable material standards should be confirmed using the current EVERLASTIC® BP-200 technical data sheet before specifying the product.

Custom Fabrication for Precast Concrete Manufacturers

At Williams Products, we understand that precast concrete manufacturers require consistent dimensions, reliable material supply, and bearing pads that are ready for installation.

We offer EVERLASTIC® BP-200 ROF Bearing Pads in custom configurations, including:

  • Rectangular bearing pads
  • Square bearing pads
  • Custom thicknesses
  • Project-specific widths and lengths
  • Specialty cut shapes
  • Pads for precast wall panels
  • Pads for structural precast components
  • Custom production quantities

Our fabrication capabilities help precast manufacturers and contractors reduce jobsite cutting and material preparation.

Whether you require a small quantity for a specialized precast project or production quantities for ongoing manufacturing, Williams Products can assist with your bearing pad requirements.

Material selection should be based on the applicable project plans, specifications, design loads, environmental conditions, and intended application. Product suitability should be verified for the specific requirements of the project.

Sectors

Information

Contact us

Need EVERLASTIC® BP200?

Contact Williams Products for pricing, availability, material information, and custom fabrication.

Send us a message

"*" indicates required fields