Glossary
Information
Williams Products Glossary
A2LA:
American Association of Laboratory Accreditation- a non-profit, professional membership society committed to the success of laboratories through the administration of a broad spectrum, nationwide laboratory accreditation system and a full range of training on laboratory practices taught by experts in their field.
AASHTO:
The American Association of State Highway and Transportation Officials is a non-government entity which sets standards and guidelines for highway construction and transportation protocols in the United States. Its purpose is to support states in efficiently and safely moving people and goods.
Abrasion Resistance:
Withstanding surface loss of material due to frictional forces.
Accelerated Aging:
A test method to represent extended aging of material in a shorter amount of time. For cellular rubber it is the process of artificially increasing time to measure physical property changes. This usually involves exposure to air at an elevated temperature.
Acrylic Adhesive:
A pressure sensitive adhesive formed by the polymerization of acrylic ester monomers. These adhesives exhibit high temperature resistance, excellent U.V. resistance, good plasticizer resistance and good aging characteristics.
Age Resistance:
Ability of a material to resist deterioration caused by aging.
Aging:
The change in physical and chemical characteristics of an elastomer that has been exposed to a particular environment over time.
Ambient:
An ambiguous term referring to a stable temperature environment of approximately 70°F or “room temperature”.
AMS:
SAE Aerospace Material Specifications are utilized worldwide in the design and production of aircraft components and systems. AMS documents are standardized procurement documents designed to speed the process of delivery and to reduce the number of individual companies and government specifications. The use of AMS is voluntary.
Antioxidant / Antioxidants:
Any organic compound that slows the process of oxidation.
Chemical compounds or substances that are added to foams to improve their resistance to oxidation. An example of oxidation in polyurethane foams is a gradual shift of color to yellow.
Antiozonant:
Any substance that slows the severe oxidizing effect of ozone on elastomers. Exposure to ozone typically causes surface cracking in many rubbers
ASTM / ASTM International:
Formerly known as the American Society for Testing and Materials, ASTM International is a global standards organization that develops international standards for materials, products, systems, and services. The current Annual Book of ASTM Standards has 15 sections covering subjects ranging from steel, plastic, & rubber to electrical, water, nuclear and more.
Initials used as an abbreviation for the American Society for Testing and Materials, which is an organization devoted to the establishment of standard methods and procedures of testing materials.
ASTM D 1056:
American Society For Testing and Materials. This specification (D 1056) covers flexible cellular rubber products known as sponge rubbers and expanded rubbers. It is designed to provide certain physical property parameters and test methods for cellular rubber. Previous versions include 2014, 2007, 2000, 1998, 1991, 1985, 1978, 1968, 1967 & 1965.
Ball Rebound Test:
One of several test methods for comparing flexible foam for resilience (see Resiliency). Basically, a steel ball of specified mass is dropped from a fixed height onto a foam sample, and the height of the rebound of the ball is recorded. The rebound height is divided by the original height to give a percentage. The method is a relative test rather than absolute, since the density of the foam has a strong influence on the results.
Batch Number:
A portion of the Production Lot Number which designates the order the material was brought into production during a particular day or shift.
Blemish:
An imperfection occurring in a cellular rubber product. It is usually circular in appearance and does not go completely through the material. Sometimes referred to as a dimple.
Blend Materials:
Various polymers used in the manufacture of cellular rubber materials that when blended together give a product a wide range of resistance or performance properties.
Bloom:
Liquid or solid material that has migrated to the surface of a rubber and generally changes the surface appearance.
Blowing Agent:
Various chemicals used in the manufacture of cellular rubber products that cause the material to expand by giving off a gas when they are exposed to heat.
Bun:
A cellular rubber product that is manufactured in a mold and is usually rectangular in appearance. Also known as a block and/or plank.
Butyl Rubber:
Butyl Rubber is a copolymer of isobutylene and a small percentage of isoprene. Butyl rubber is impermeable to air and is used in applications requiring airtight rubber. Butyl rubber is use in many applications such as tire inner tubes, adhesives, fuel additives, caulks, sealants, and more.
Capability (Process) Index, Cp or Cpk:
A statistical measure used to describe the capability of a process to produce a product (output) within specification tolerance limits. The index is a measure that indicates high or low process variability. Note: Where k is a constant number of subgroups of a given size.
Carrier:
When referring to double coated pressure sensitive adhesive, it is the thin medium to which the adhesive is anchored to on both sides. One of the most common carriers is a Mylar (PET) film. Others can include Non-Woven Scrims or Tissue Paper.
Cellular Rubber:
Low to medium density rubber products containing a cellular structure. The cells may either be open and interconnecting or closed and not interconnecting; a generic term for materials containing many cells (either open or closed, or both) dispersed throughout the mass.
Chemically Blown:
A term applying to a cellular material in which the cells are formed by gases generated from thermal decomposition or other chemical reactions. In other words, in most cases, a powdered chemical that is added to a rubber mixture which, when exposed to a certain temperature, turns into a gas and causes the foam to expand.
Closed Cell Rubber:
A rubber product produced by a specific manufacturing process that utilizes gas forming ingredients in the rubber compound or by subjecting the compound to a high pressure gas such as nitrogen. Closed cell rubber is defined as a product whose cells are totally enclosed by its walls and hence not interconnecting with other cells. This unique physical property enables closed cell rubber to function as an excellent seal for moisture, dust, air, gas, smoke, noise, etc.
Cloth–Inserted:
Fabric re-enforced sheet rubber enhances dimensional stability and is typically used in applications with high compression loads.
CNC Router:
A computer numerical control router is a computer-controlled cutting machine related to the hand-held router used for cutting various hard materials, such as wood, composites, aluminum, steel, plastics, glass, rubber and foams.
Coarse Cell Structure:
A term used to describe the appearance of expanded cellular rubber when the individual cells are larger and/or spread apart further than normal. Sometimes incorrectly referred to as Open Cell.
Compression Deflection 25% (CD):
The measure of the hardness of a cellular rubber product. In other words, the force required to compress a material 25% of its original thickness. It can be expressed in lb/in² (pounds per square inch) or kPa.
Compression Force Deflection (CFD):
A test which consists of measuring the force necessary to produce a 50% compression over the entire top area of the foam specimen. In other words, the force required to compress a material 50% of its original thickness. Also referred to as Compression Load Deflection (CLD).
Compression Molding:
A molding process in which the uncured rubber compound is placed directly into the mold cavity, and compressed to its final shape by the closure of the mold
Compression Set:
The permanent deformation experienced by a rubber material when compressed for a period of time. The term is commonly used in reference to a test conducted under specific conditions wherein the permanent deformation, expressed as a percentage, is measured after a prescribed period of time. A low compression set is desirable in molded rubber parts such as seals and gaskets, which must retain their dimensions to maintain an effective seal.
The residual decrease in thickness of a test specimen measured 30 minutes or 24 hours after removal from a suitable loading device in which the specimen had been subjected for a definite time to compressive deformation under specified conditions of load and temperature.
Control Limits:
Limits on a control chart that are used as criteria for signaling the need for action, or for judging whether a set of data does or does not represent a “state of statistical control.”
Copolymer:
A polymer made of two different monomers. For example, SBR is a rubber co-polymer and is made up of the monomers Styrene and Butadiene.
Cross-Linking:
The bonding of molecules into a structure. This gives the polymer increased strength resulting in superior properties. Crosslinking can be achieved by either physical (irradiation by an electron beam) or by chemical means.
Cure:
An irreversible process during which a rubber compound through a change in its chemical structure (crosslinking, for example), becomes less plastic and more resistant to swelling by organic liquids and elastic properties are conferred, improved or extended over a greater range of temperature. Cure and vulcanization are interchangeable terms as they share the same definition.
For cellular rubber, the time period and temperature in which various chemical reactions (e.g. cross-linking) occurs. This phase of a process is critical as too much time will produce an over-cured product and too little time will produce an under-cured product.
Delamination (PSA):
The undesirable separation or buckling of the release liner from an adhesive layer usually in the parallel direction of the web. Most often found during high humid conditions causing the paper to grow.
Density:
The weight in solids of a unit volume of material expressed in pounds per cubic foot (PCF) or grams per cubic centimeter (g/cm³). In other words, it is the ratio of the mass of a body to its volume.
Die Cutting:
Die cutting is the general process of using a die to shear webs of materials such as rubber, fiber, foil, cloth, paper, corrugated fiberboard, chipboard, paper-board, plastics, pressure-sensitive adhesive tapes, foam, and sheet metal.
Dielectric Strength:
The maximum electric field that a foam rubber product can withstand without breaking down, usually measured in Kilovolts per centimeter. At breakdown, a considerable current passes as an arc, usually with more or less all decomposition of the material along the path of the current.
Dimensional Stability:
The ability of a foam material part to retain the precise shape in which it was fabricated.
Double-Coated:
A pressure sensitive adhesive consisting of a carrier with similar or dissimilar adhesives applied to both surfaces.
Dry Web Lamination:
A lamination process using heat activated web adhesives.
Durometer:
Instrument for measuring the indentation hardness of rubber.
An instrument used to measure the hardness of a material. As a general rule, this method is not as accurate as compression deflection @ 25%. Types of durometers include A, D and 00. The proper one to use for soft, cellular materials is 00.
ECH:
Epichlorohydrin. A polymer used in the manufacture of cellular rubber. Its primary characteristics are resistance to swell when exposed to fuel and high temperature resistance up to 325ºF.
Elasticity:
A rubber’s ability to return to its original size and shape after removal of the stress causing deformation such as stretching, compression, or torsion. It is the opposite of plasticity. The term elasticity is often loosely employed to signify the “stretchiness” of rubber.
Elastomer:
A macromolecular material that returns rapidly to approximately the initial dimensions and shape after substantial deformation by a weak stress and the release of the stress.
Elongation:
General referred to in terms of tensile (pull apart) testing, elongation is the increase in length of a test specimen, expressed as a percentage of its original (unstretched) length… relative to a given load at the breaking point.
The extension between bench marks produced by a tensile force applied to a specimen. Expressed as a percentage, this test is used to measure the length of stretch in a material before it breaks.
EPDM:
Ethylene Propylene Diene Monomer. A polymer used in the manufacture of cellular rubber. It has excellent resistance to sunlight, ozone and heat, and good resistance to alkalis and acids.
EVA:
Ethylene Vinyl Acetate. It is generally used as a co-polymer in polyolefin foams resulting in greater resilience and higher tensile and tear performance.
Expanded Rubber:
A term reserved for closed-cell compounds that are made by incorporating gas-forming ingredients in the rubber compound or by subjecting the compound to high-pressure gas, such as nitrogen. These materials are manufactured in sheet, roll or strip form. They can be molded and extruded into a particular profile by extrusion.
Extrusion:
The process in which an uncured rubber compound is pushed through a die of a desired cross-sectional shape or profile.
Material that is formed by being forced through a shaping orifice as a continuous body.
Filler:
A non-fibrous material added to a fabric to increase its weight or to modify its appearance. Examples are insoluble clays or gypsum, starches or gums.
Flame Retardant:
Resistant to catching fire. Usually, additives included in the manufacturing ingredients to prevent the material from catching fire, although some polymers are naturally resistant.
Flammability:
The characteristics of a material that pertain to its relative ease and relative ability to sustain combustion.
Fluid Immersion Test:
The submersion of a piece of cellular rubber in Fuel B (similar to Jet Fuel). The foam is weighed before and after and the test measures the amount of fuel absorbed by the material. The lower the % of mass gain, the better the resistance to petroleum based fuels.
Foam:
A product, either flexible or rigid, that has been produced by the internal generation of a gas in a fluid medium that is polymerizing while expanding in volume. The final result is either an open or closed-cell product.
Foam to Foam Lamination:
A method of fusing together two or more different foam substrates. Sometimes used for dual density applications.
Gasket:
A shaped piece of rubber that seals the junction between two surfaces. Often found in engines, pipes, tanks, valves and a multitude of other devices and applications, rubber gaskets may be molded, extruded, spliced, or die cut from sheet materials.
Hardness:
A measurement of the resistance to penetration of a rubber sample by an indenter. High values indicate harder materials while low values indicate softer materials.
The resistance to indentation, as measured under specific conditions.
Hole (Void):
An unintentional cavity occurring in a cellular rubber product. It is usually circular in appearance, medium to large in size and goes completely through the material.
Hydrophilic:
A foam that has an affinity for water or easily absorbs water. A sponge would be an example.
Hydrophobic:
A foam that is resistant to water or won’t easily absorb water.
Indentation Force Deflection (IFD):
A hardness test which consists of measuring the force necessary to produce designated indentations in a foam material. For example, a 25 and 65% compression. Also referred to as Indention Load Deflection (ILD).
Injection Molding:
A molding method in which a rubber or plastic material is heated and forced under pressure into the mold cavity.
K Factor:
A measure of the thermal conductivity of heat insulation expressed as BTUs/sq. ft. Lower values indicate better insulating materials.
Kiss Cutting:
During the kiss-cutting process, the perimeter of each part is cut by a sharp metal die or laser beam, but the cut does not penetrate the part’s backing material (liner).
Laboratory Accreditation:
Accreditation is defined as: the granting of approval to an institution of learning by an official review board after having met specific requirements. This applies to laboratories based on test methods, documentation and traceability.
Lamination:
The process of adhering flexible foam, PSA, vinyl and fabrics in a variety of different combinations. Two common processes are fabric lamination and PSA lamination.
Laser Cutting:
Laser cutting is a precise method of cutting a design from a given material using a CAD file to guide it.
Lathe Cutting:
A lathe is a machine tool that rotates a workpiece about an axis of rotation to perform various operations such as cutting, sanding, knurling, drilling, deformation, facing, and turning, with tools that are applied to the workpiece to create an object with symmetry about that axis.
Leveling:
The process of taking raw material rubber products and skiving thin cuts of material from it until the rubber is uniform in thickness.
Lot Number:
A term used to describe the code on a material that is used for traceability.
Machine Direction:
The long direction within the plane of a material, in other words, the direction in which the material is being produced by the machine.
Manufacturing Date:
The day of any particular year that any given material is processed into its final form. This is often used to benchmark the shelf-life of a product for warranty purposes.
MIL-C-3133C:
A military specification for molded or fabricated parts of cellular elastomeric materials. It primarily covers fabricated parts, sampling, marking and packing procedures. It is used in conjunction with Mil-STD-670-B which covers grade numbers and test requirements. (MIL-STD-670-B)
MIL-R-6130C:
A military specification which establishes physical property requirements for chemically blown cellular rubber. Some of these requirements ranges are for Compression Deflection @ 25%, Density, Water Absorption, Low Temperature Resistance, Flame Resistance, etc.
Modulus:
A measure of resistance of a material to deformation. It is measured by the force required to reach a predetermined compression or extension
Defined as the force required to elongate material.
Mooney Viscosity:
A measure of the plasticity of a polymeric compound determined in a Mooney sheared disc viscometer.
Neoprene (CR) (NEO):
Polychloroprene. A synthetic rubber discovered by the Du Pont Company in 1931. It is a polymer composed of carbon, hydrogen and chlorine. Its features include resistance to petroleum based fluids and flame resistance.
Nitrile Rubber (NBR):
Emulsion copolymers of Butadiene and Acrylonitrile in varying proportions. This chemical is used in the manufacture of expanded rubber primarily for its resistance to swelling in oils and solvents.
Oil Resistant:
Ability of vulcanized rubber to resist swelling and other detrimental effects of exposure to various oils.
Oozing:
Concerning PSA, referring to the condition where the sides of a roll become sticky or tacky due to the flowing out of adhesive between the layer of tape.
Open Cell Rubber Material:
A rubber product produced by a specific manufacturing process that utilizes a chemical blowing agent that expands the mass during the vulcanization process. Open cell rubber is defined as materials whose cells are not totally enclosed by its walls and open to the surface, either directly or by interconnecting with other cells. The primary characteristics are that water, air or gas can pass through, much like the way water is absorbed by a dish sponge. This type of material is also excellent for padding and cushioning applications where low compression set is required.
Over-Cure:
For cellular rubber, the time period or temperature in which various chemical reactions which occur (e.g. cross-linking) last too long. The result is blisters, too tight of a cell structure, voids along the edges, etc. This problem is most apparent on the edges of a material.
Ozone Resistance:
The ability of a material to resist degradation in sunlight and/or outdoor exposure.
Physical Properties:
Of or pertaining to the matter and energy of a material or the characteristics as applied to physics. For cellular rubber, this pertains to compression deflection, density, water absorption, tensile strength, elongation, etc.
Pin Hole:
An unintentional cavity occurring in a cellular rubber product. It is usually circular in appearance, very small and goes completely through the material.
Plastic:
One of many high polymeric substances, including both natural and synthetic products, but excluding rubber. At some stage in its manufacture, every plastic is capable of flowing, under heat and pressure, if necessary, into the desired final shape.
Plasticize:
To soften a material and make it plastic or moldable, either by means of a plasticizer or application of heat.
Plasticizer:
A chemical agent added to the rubber compound batch mix to soften the elastomer for processing, as well as to improve physical properties of the compound product (i.e. increase elongation, reduce hardness, improve tack)
A substance added to materials during the manufacturing process to improve flexibility, workability, etc.
Plasticizer Migration:
Loss of plasticizer from an elastomeric compound. It often migrates to the surface of the material where it is absorbed by another product or evaporates. This process causes the material to lose its flexibility and can contaminate other products.
Polyester Foam:
Urethane foams made by reacting isocynate with polyester.
Polyether Foam:
Urethane foams made by reacting isocynate with polyether.
Polyethylene:
A thermoplastic composed of polymers of ethylene.
Polymer:
Many monomer units chemically linked together in repeating structural units. Rubber polymers available at DRC include: Neoprene, Butyl, EPDM, Nitrile (Buna–N), Natural Rubber, SBR and Silicone.
This is a large molecular chain made up of two or more monomers. These monomers are polymerized or chemically reacted to form a material that is significantly different than either of the two base monomers from which it was made.
Polymerization:
Process of linking two or more molecules to form a new molecule having different properties.
Polypropylene:
Any of various thermoplastic resins that are polymers of propylene. Propylene is a flammable gas derived from petroleum hydrocarbon cracking and used in organic synthesis.
Polyurethane:
Any of various thermoplastic or thermosetting resins, widely varying in flexibility, used in tough chemical-resistant coatings and in adhesives, foams, and electrical insulation.
Pressure Sensitive Adhesive (PSA):
Pressure Sensitive Adhesive; A bonding system requiring pressure to be applied to activate the adhesive layers. Typically, these are coated in Acrylic or Rubber-Based variations using a film carrier for added strength and stretch resistance
A term used to designate a distinct category of adhesive tapes which in dry (solvent free) form are aggressive and permanently tacky at room temperature and adhere to a variety of surfaces without the need of more than finger or hand pressure. They require no activation by water, solvent or heat and have sufficient cohesive strength so they can be handled with the fingers.
PVC:
Polyvinyl chloride. A polymer used in the manufacture of expanded rubber. This compound is inherently fire retardant because of its high chlorine content.
RE:
Terminology derived from the ASTM-D-1056-65 specification. The R stands for cellular rubbers made from natural rubber, synthetic rubber or rubber-like materials, alone or in combinations where specific resistance to the action of petroleum based oils is not required. The E is a designation for closed-cell material.
Resilience / Resiliency:
The capability of returning to original size and shape after deformation
A test to determine the shock absorption properties of a foam. On this test, a material is placed flat on an instrument and a weight is dropped onto it from a specified height. The amount of bounce is then taken from a scale to get the final value. The lower the value, the higher the shock absorption properties of the foam.
RO:
Terminology derived from the ASTM-D-1056-65 specification. The R stands for cellular rubbers made from natural rubber, synthetic rubber or rubber-like materials, alone or in combinations where specific resistance to the action of petroleum based oils is not required. The O is a designation for open-cell material.
Roll Slitting:
Roll slitting is a shearing operation that cuts a large roll of material into narrower rolls
Rubber:
A common name for both naturally occurring and synthetically made elastomeric compounds
A material that is capable of recovering from large deformations quickly and forcibly, and can be, or already is, modified to a state in which it is essentially insoluble in boiling solvent.
Rubber Based Adhesives:
An adhesive made from one or more synthetic or natural elastomers and tackifiers to produce a pressure-sensitive adhesive. These adhesives are characterized by having higher quick tack and adhesion than acrylics, however, they lack aging and weather resistance.
SAE-J-18:
A test method which covers flexible cellular products known as sponge rubbers and expanded rubbers. It is essentially the same as ASTM-D-1056. The SAE stands for Society of Automotive Engineers.
SBE:
Terminology derived from the ASTM-D-1056-65 specification. The SB Designation stands for cellular rubbers made from synthetic rubber or rubber-like materials having oil resistance with low swell. The E is a designation for closed-cell material.
SBR:
Styrene-butadiene rubber. A polymer used in the manufacture of expanded rubber. It is very economical and possesses no unique chemical resistance properties.
SCE:
Terminology derived from the ASTM-D-1056-65 specification. The SC Designation stands for cellular rubbers made from synthetic rubber or rubber-like materials having oil resistance with medium swell. The E is a designation for closed-cell material.
Scorching:
Premature curing of compounded rubber stock during processing or storage, with the potential for adversely affecting material flow and plasticity during subsequent shaping and curing processes.
Self-Extinguishing:
A somewhat loosely used term describing the ability of a material to cease burning once the source of flame has been removed.
Shelf-Life:
The period of time that a product can be stored under specific conditions and still remain suitable for use.
Shore Hardness:
A durometer or hardness test that measures the depth of an indentation in the material created by a given force on a standardization presser foot. The two most common scales are ASTM D2240 type A and type D scales. The A scale is for softer plastics, while the D scale is for harder ones.
Shrinkage:
An inadvertent dimensional decrease of cellular structure without an actual breakdown or collapse of the cell. This characteristic is relatively common in all cellular rubber and plastic products. The primary cause is the equalization of pressure from the manufacturing process to normal atmospheric pressures.
Silicone:
A rubber made from silicone elastomers and noted for its retention of flexibility, resilience, tensile strength and wide temperature range.
Skin:
A relatively dense layer at the surface of a cellular rubber material. This layer is the result of exposure to heat and/or contact with a mold during the manufacturing process.
Skive:
To shave or cut off the surface of a rubber material in a horizontal manner. Sometimes referred to as splitting which means to divide sharply or cleanly into layers.
Slitting:
The action of cutting material to width.
Specification:
A document that spells out the requirements for a particular material or group of materials. It normally details the physical properties, performance requirements, general composition, sampling procedure and packaging characteristics.
Sponge Rubber:
A cellular rubber consisting predominantly of open cells made from a solid rubber compound. These products are manufactured in sheet, roll, strip, and molded or special shapes. Sometimes referred to as foam rubber.
Stripping:
A product and/or process of producing a long, narrow piece of material that is uniform in width. Sometimes referred to as slitting.
Substrate:
The surface to which a pressure-sensitive tape, fabric, foam, etc. is applied.
Tear Resistance:
Resistance to the growth of a cut in the seal when tension is applied
The force required to tear completely across a specifically nicked rubber test specimen or right angle test specimen, by elongating at a specific rate.
Temperature Range:
The minimum and maximum temperature that a material can be exposed to before the physical properties and/or appearance begins to move out of their specification range.
Tensile Strength:
The force required to rupture a sample of stated geometry
The maximum pounds per square inch (psi) that a material can be stretched lengthwise without tearing, expressed as a percentage of the original length.
Thermal formable:
To change the shape and/or structure of a material using heat and a suitable mild structure.
Thermoplastic:
A material which when thermally processed undergoes a reversible phase change to become plastic and capable of being molded to a desired shape. Upon cooling, the material reverts to its original properties
A material which is capable of softening or melting at elevated temperatures without degradation so that cooling of the material restores it to its original condition.
Thermoplastic Elastomer (TPE):
A material which combines the processing characteristics of a plastic but displays rubber-like properties upon completion of processing
Thermoset:
A material, either an elastomer or plastic, which when thermally processed undergoes an irreversible chemical reaction to achieve its final material state
A material that is cured or transformed by elevated temperatures into a solid condition from which it does not change, upon reheating, until it reaches the decomposition point. Most urethane materials are thermosetting materials (e.g. flexible and rigid foams).
Tight Cell Structure:
A term used to describe the appearance of an expanded cellular rubber material when the individual cells are smaller and/or tighter than normal.
Tolerance:
The permissible deviation from a specified value of a dimension.
Toughness:
Property of resisting fracture or distortion. Usually measured by impact test, high impact values can indicate a heightened level of toughness
TPE:
Thermoplastic Elastomer combines the rubber-like performance of elastomers with the processing advantages of plastic. Scrap material can be recycled without significant loss in physical properties, unlike thermoset materials.
Transfer Tape:
An unsupported pressure-sensitive adhesive on a release liner that has been release coated on both sides.
UL 94 HF1:
Underwriters Laboratory. The 94 is a specification for testing the flammability of plastic materials used for parts in devices and appliances. The HF-1 test is intended to be performed on foamed plastic materials. Other tests include 94 HBF, 94 V-O and 94 5-V
Under cure:
For cellular rubber, when the time period in which various chemical reactions occurring (e.g. cross-linking) does not last long enough. The result is a loose cell structure, a mushy appearance, etc. This problem is most apparent in the center of a material and this area will often collapse after skiving.
UV Stabilizer:
Any chemical compound which, when mixed with a resin, selectively absorbs UV rays. Since UV wavelengths are shorter than the visible, their photons have more energy, enough to initiate some chemical reactions and to degrade most plastics.
Vinyl:
A chemical derived from ethylene and used as a basic material for plastics that are typically tough, flexible, shiny and often used for coverings and clothing.
Viscoelastic:
A term describing a urethane foam where the material will return to its initial form or state after deformation or compression.
Viscosity:
The measurement of the resistance of a material to flow under stress
Void – Blow Hole:
An unintentional cavity occurring in a cellular rubber product. It is usually circular in appearance, medium to large in size and goes completely through the material.
Vulcanization:
An irreversible process during which a rubber compound through a change in its chemical structure (crosslinking, for example), becomes less plastic and more resistant to swelling by organic liquids and elastic properties are conferred, improved or extended over a greater range of temperature. Cure and vulcanization are interchangeable terms as they share the same definition.
An irreversible process during which a rubber compound, through a change in its chemical structure, e.g. cross-linking, becomes less plastic and more resistant to swelling by organic liquids. The result is that elastic properties are improved or extended over a wide range of temperatures. Vulcanization can be carried out under numerous conditions but it usually involves heat.
Water Absorption Test:
The process of submerging a piece of cellular rubber in distilled water and exposing it to increased atmospheric pressure. The foam is weighed beforehand and afterwards. The test measures the amount of water absorbed by the material. The lower the %, the less water the material absorbs.
Waterjet Cutting Machine:
A waterjet cutter is an industrial tool capable of cutting a wide variety of materials using a very high-pressure jet of water, or a mixture of water and an abrasive substance to cut hard materials such as metal or granite.
Z Suffix:
A suffix within ASTM-D-1056 used for special requirements. The test methods and values are to be arranged between the manufacturer and the purchaser.
Contact us
Ready to Get Started?
We have the products you need to get the job done, along with 60 years of expertise to ensure you get the right product. Contact us today to learn how we can help you with your project. Let’s get in touch!
Send us a message
"*" indicates required fields