Masonry
Masonry
Everlastic® EVA200G
Closed-Cell EVA Foam for Masonry Construction
EVERLASTIC® EVA200G from Williams Products is a resilient, closed-cell EVA foam designed for expansion, isolation, separation, cushioning, sealing, and custom-fabricated applications throughout masonry and building construction.
EVA200G combines flexibility and resilience with low water absorption, making it particularly well suited for applications where brick, block, stone, concrete, precast, and other building materials interface.
Williams Products can fabricate EVERLASTIC® EVA200G into strips, pads, gaskets, spacers, fillers, and custom shapes to meet the dimensional requirements of your masonry project.
Closed-Cell EVA Foam for Masonry Applications
Masonry construction contains numerous joints and transitions where a resilient separation material is required between adjoining building components.
EVERLASTIC® EVA200G provides a flexible closed-cell cushion and separation layer that can help accommodate movement while preventing direct rigid contact between adjoining materials.
Typical applications include:
- Masonry-to-concrete interfaces
- Brick-to-concrete separation
- CMU-to-concrete separation
- Masonry-to-precast interfaces
- Building perimeter joints
- Expansion and isolation joints
- Window and door openings
- Pads and spacers
- Custom gaskets
- Architectural masonry components
Key Features & Benefits
- Closed-cell EVA foam
- Flexible and resilient
- Low water absorption
- Excellent cushioning characteristics
- Provides separation between adjoining building materials
- Helps accommodate movement
- Lightweight and easy to handle
- Easy to cut and install
- Suitable for interior and exterior applications
- Excellent for custom-fabricated pads and spacers
- Available in custom thicknesses, widths, and lengths
- Custom fabricated by Williams Products
Low Water Absorption
One of the key advantages of EVERLASTIC® EVA200G is its closed-cell construction.
The closed-cell structure helps limit water absorption, making EVA200G particularly useful in masonry and building applications where exposure to moisture may occur.
This is especially valuable in:
- Exterior masonry walls
- Building perimeter applications
- Masonry-to-concrete interfaces
- Precast construction
- Window and door openings
- Building-envelope transitions
- Exterior architectural applications
For masonry applications where moisture resistance is important, closed-cell EVA provides a significant advantage over open-cell foam materials.
Masonry-to-Concrete Isolation
Brick and concrete masonry frequently interface with structural concrete.
Because these materials can respond differently to temperature, moisture, loading, and building movement, some designs require a resilient separation layer between the components.
EVERLASTIC® EVA200G can provide cushioning and separation between masonry and adjoining concrete surfaces.
Typical applications include interfaces with:
- Concrete columns
- Concrete walls
- Foundations
- Structural slabs
- Concrete beams
- Curbs
- Sidewalks
- Precast concrete
- Other structural components
Masonry-to-Precast Interfaces
Precast concrete components frequently interface with brick, CMU, stone, and other masonry materials.
EVERLASTIC® EVA200G can be fabricated into strips, pads, spacers, and gaskets to provide a resilient separation between these adjoining components.
Applications may include:
- Precast panels
- Architectural precast
- Masonry veneer
- CMU walls
- Precast-to-brick interfaces
- Precast-to-block interfaces
- Structural concrete components
The resilience of EVA200G helps provide cushioning while its closed-cell construction helps minimize moisture absorption.
Expansion & Isolation Joint Applications
EVERLASTIC® EVA200G can be incorporated into properly designed expansion and isolation joints where a flexible, resilient, closed-cell material is required.
These joints allow adjoining components to move independently rather than creating direct rigid contact.
Typical applications include:
- Masonry expansion joints
- Isolation joints
- Building perimeter joints
- Slab-to-wall joints
- Masonry-to-concrete joints
- Concrete-to-precast joints
- Separation between dissimilar building materials
Pads, Spacers & Separators
Not every masonry application requires a continuous joint filler.
EVERLASTIC® EVA200G can be fabricated into individual pads, spacers, and separators for applications requiring resilient support or cushioning between components.
Typical uses include:
- Masonry spacers
- Precast spacers
- Isolation pads
- Cushioning pads
- Setting pads
- Component separators
- Architectural spacers
- Custom construction pads
Williams Products can fabricate these components to the exact dimensions required for the application.
Window, Door & Building Openings
Masonry wall openings create transitions between brick or block and other building materials.
EVERLASTIC® EVA200G can be fabricated into strips, pads, and gaskets for appropriate applications around:
- Windows
- Doors
- Louvers
- Wall penetrations
- Architectural components
- Precast components
- Building-envelope transitions
The combination of resilience and low water absorption makes EVA200G particularly useful where the material may be exposed to exterior moisture.
Exterior Masonry & Building Envelope
Exterior masonry systems are exposed to changing environmental conditions throughout the life of the building.
Rain, humidity, temperature changes, and repeated wetting and drying cycles place additional demands on materials incorporated into the wall assembly.
Because EVA200G is a closed-cell foam with low water absorption, it is particularly useful for exterior applications where a resilient separation or cushioning material is required.
Lightweight & Easy to Fabricate
EVERLASTIC® EVA200G is lightweight and easy to handle, making it convenient for both field installation and factory fabrication.
The material can be cut and fabricated into a wide range of configurations without requiring heavy or specialized components.
Williams Products can provide EVA200G as:
- Sheets
- Continuous strips
- Pads
- Gaskets
- Spacers
- Separators
- Die-cut components
- Custom shapes
NYSDOT 705-08 Applications
EVERLASTIC® EVA200G is also used in transportation and infrastructure applications and is approved for NYSDOT 705-08 applications.
This provides an additional specification advantage for contractors, distributors, and engineers working across both masonry/building construction and transportation infrastructure markets.
For projects requiring NYSDOT compliance, contact Williams Products for current product documentation and applicable approval information.
Custom Fabricated for Masonry Construction
Williams Products specializes in converting and fabricating foam and rubber materials for the construction industry.
EVERLASTIC® EVA200G can be slit, cut, die-cut, and fabricated to meet the requirements of your masonry application.
Material can be supplied to your required:
- Thickness
- Width
- Length
- Shape
- Quantity
Whether you need continuous strips for an isolation joint or thousands of identical pads or spacers, Williams Products can provide EVA200G in a configuration ready for installation.
Typical Masonry Applications
EVERLASTIC® EVA200G can be used for a wide range of masonry and building construction applications, including:
- Masonry-to-concrete isolation
- Brick-to-concrete separation
- CMU-to-concrete separation
- Masonry-to-precast interfaces
- Expansion joints
- Isolation joints
- Building perimeter joints
- Window and door openings
- Exterior wall systems
- Architectural masonry
- Precast construction
- Setting pads
- Cushioning pads
- Spacers and separators
- Custom gaskets
- Custom fabricated construction components
Industries & Markets Served
Masonry Construction | Brick Construction | Concrete Masonry | Precast Construction | Commercial Construction | Building Envelope | Architectural Masonry | Infrastructure Construction | Institutional Construction | Industrial Construction
Why Choose EVERLASTIC® EVA200G?
EVERLASTIC® EVA200G provides a versatile closed-cell foam solution for masonry contractors, distributors, precasters, architects, engineers, and building-product manufacturers.
Its combination of:
Closed-Cell Construction | Low Water Absorption | Resilience | Cushioning | Separation | Lightweight Handling | Custom Fabrication
makes EVA200G particularly useful for applications where masonry interfaces with concrete, precast, or other building materials.
Unlike materials intended only for continuous expansion joints, EVA200G can also be fabricated into individual pads, spacers, gaskets, and custom components, giving contractors and manufacturers a wide range of application possibilities.
Product selection should be based on project requirements, design conditions, environmental exposure, and applicable project specifications. ASTM D1056 classification does not by itself indicate suitability for every application.
Sectors
Information
Tech data/spec sheet
Safety data sheet
Cut sheet
Contact us
Need Everlastic® EVA200G for Your Project?
Williams Products provides quality cellular rubber materials and custom fabrication for concrete and construction applications. Contact us for pricing, availability, and custom fabrication options.
Send us a message
"*" indicates required fields