Masonry
Masonry
Everlastic® Dynashield
Ceramic Fiber Fire-Rated Joint Filler for Masonry Construction
EVERLASTIC® DynaShield from Williams Products is a high-temperature ceramic fiber joint filler designed for fire-rated expansion joints, wall joints, floor-to-wall joints, penetration seals, and other fire-resistant joint applications in masonry and building construction.
DynaShield is manufactured from a strong, lightweight needled blanket made from long ceramic fibers that are cross-locked during the forming process to provide excellent strength.
With superior flame and heat resistance, EVERLASTIC® DynaShield provides architects, engineers, masonry contractors, and firestopping professionals with a dependable solution where joint movement and fire resistance must be accommodated within the same assembly.
Fire-Rated Joint Protection for Masonry Construction
Expansion and movement joints are necessary throughout masonry and building construction, but these openings can also create potential pathways through fire-rated assemblies.
EVERLASTIC® DynaShield is designed to provide a compressible, heat-resistant joint filler for applications where fire resistance must be maintained while allowing the joint to accommodate movement.
DynaShield can be fabricated into fire-retarding expansion-joint fillers and penetration seals for use in masonry, concrete, and other fire-rated construction assemblies.
Key Features & Benefits
- Ceramic fiber construction
- Strong, lightweight needled blanket
- Excellent flame resistance
- Excellent heat resistance
- Designed for fire-rated joint applications
- Suitable for expansion and movement joints
- Compressible for installation into construction joints
- Available for multiple fire-rating requirements
- Can be fabricated for specific joint dimensions
- Suitable for masonry and concrete construction
- Asbestos-free fibers
- Melting point of 3,350°F (1,843°C)
- Custom fabrication available from Williams Products
Fire-Rated Expansion Joints
Masonry and concrete structures require expansion and movement joints to accommodate dimensional changes caused by temperature, loading, shrinkage, and normal building movement.
When these joints occur within a fire-rated wall or floor assembly, the joint system must be designed to maintain the required level of fire resistance.
EVERLASTIC® DynaShield provides a compressible ceramic fiber barrier within the joint, combining movement capability with excellent resistance to high temperatures.
Typical applications include:
- Masonry expansion joints
- Fire-rated wall joints
- Concrete-to-masonry joints
- Floor-to-wall joints
- Wall-to-wall joints
- Head-of-wall conditions
- Building separation joints
- Fire-rated movement joints
- Penetration seals
Floor-to-Wall Joint Firestopping
EVERLASTIC® DynaShield is particularly suited for floor-to-wall joint firestopping applications where a fire-resistant material is required between adjoining construction components.
These conditions are commonly encountered where masonry or concrete walls meet:
- Concrete floor slabs
- Structural decks
- Fire-rated partitions
- Structural walls
- Other fire-rated building components
DynaShield provides a compressible ceramic fiber material that can be incorporated into the joint assembly while allowing for movement between the adjoining components.
Masonry Wall & Partition Applications
Fire-rated masonry walls are frequently used to separate areas of commercial, institutional, industrial, and multi-family buildings.
Open joints or gaps between the masonry wall and adjoining structural components must be properly addressed as part of the overall fire-resistant assembly.
EVERLASTIC® DynaShield can be used in joint conditions involving:
- CMU walls
- Concrete block walls
- Fire-rated masonry partitions
- Masonry-to-concrete interfaces
- Masonry-to-deck interfaces
- Masonry-to-floor interfaces
- Structural separation joints
High-Temperature Ceramic Fiber Construction
EVERLASTIC® DynaShield is manufactured from long ceramic fibers formed into a strong, lightweight needled blanket.
The fibers are cross-locked through the forming process, creating a material with excellent strength while maintaining the flexibility and compressibility required for joint applications.
The ceramic fibers provide superior flame and heat resistance and have a melting point of approximately 3,350°F (1,843°C).
This high-temperature capability makes DynaShield particularly well suited for construction joints where conventional foam or rubber joint fillers are not appropriate.
Fire Ratings
EVERLASTIC® DynaShield can be incorporated into assemblies designed for different firerating requirements.
Typical published configurations include:
Fire Rating Material Thickness Material Depth
1 Hour 175%–200% of Joint Width 2″
2 Hour 175%–200% of Joint Width 4″
3 Hour 175%–200% of Joint Width 5″
4 Hour 175%–200% of Joint Width 6″
The required material depth and installation configuration depend on the required fire rating and tested joint assembly.
Always follow the applicable project specification, tested assembly, and installation requirements when determining the correct DynaShield configuration.
Installation
EVERLASTIC® DynaShield Ceramic Fiber is designed to be installed under compression within the joint.
For typical applications, the ceramic fiber blanket is folded and inserted into the joint under compression.
It is not necessary to fill the entire depth of the construction joint. The required depth of DynaShield depends on the desired fire rating and applicable assembly requirements.
Proper compression is important to the performance of the fire-resistant joint system.
Penetration Seal Applications
In addition to expansion and movement joints, EVERLASTIC® DynaShield ceramic fiber can be fabricated for use in fire-retarding penetration seal applications.
These applications may occur where building services or structural components pass through or interface with fire-rated construction.
The material’s combination of high-temperature resistance, flexibility, compressibility, and lightweight construction makes it adaptable to a variety of fire-resistant joint and penetration conditions.
Custom Fabricated for Your Project
Williams Products specializes in converting and fabricating foam, rubber, and specialty construction materials.
EVERLASTIC® DynaShield can be fabricated to meet the dimensional requirements of your fire-rated joint application.
Rather than requiring contractors to work entirely from bulk ceramic fiber material in the field, Williams Products can provide fabricated material based on the:
- Joint width
- Required material thickness
- Required material depth
- Length
- Quantity
- Fire-rating requirement
This can help simplify material preparation and installation on the jobsite.
Typical Masonry & Construction Applications
EVERLASTIC® DynaShield can be used in properly designed fire-rated assemblies for:
- Masonry expansion joints
- Fire-rated CMU walls
- Floor-to-wall joints
- Wall-to-wall joints
- Head-of-wall joints
- Masonry-to-concrete joints
- Building separation joints
- Fire-rated movement joints
- Structural expansion joints
- Penetration seals
- Commercial construction
- Institutional construction
- Industrial construction
- Multi-family construction
Industries & Markets Served
Masonry Construction | Commercial Construction | Firestopping | Concrete Construction | Institutional Construction | Industrial Construction | Multi-Family Construction | Building Envelope
Why Choose EVERLASTIC® DynaShield?
Expansion and movement joints are necessary for a building to function properly, but when those joints occur within a fire-rated assembly, they require specialized materials.
EVERLASTIC® DynaShield combines:
Fire Resistance | High-Temperature Performance | Compression | Flexibility | Lightweight Construction | Custom Fabrication
Its ceramic fiber construction makes DynaShield an excellent option for masonry and concrete applications where movement accommodation and fire-resistant joint protection are both required.
Williams Products can fabricate DynaShield to your project requirements, providing contractors and distributors with material prepared for the specific joint configuration.
Product selection should be based on project requirements, design conditions, environmental exposure, and applicable project specifications. ASTM D1056 classification does not by itself indicate suitability for every application.
Sectors
Information
Tech data/spec sheet
Safety data sheet
Cut sheet
Contact us
Need Everlastic® Dynashield for Your Project?
Williams Products provides quality cellular rubber materials and custom fabrication for concrete and construction applications. Contact us for pricing, availability, and custom fabrication options.
Send us a message
"*" indicates required fields