Williams Products

Concrete

Concrete

Everlastic® SBR Waterstop

High-Tensile SBR Rubber Waterstop Meeting CRD-C 513-71

EVERLASTIC® SBR Waterstop from Williams Products is a high-tensile rubber waterstop designed to help prevent the passage of water through joints in concrete structures.

Manufactured from durable SBR (Styrene-Butadiene Rubber), EVERLASTIC® SBR Waterstop provides an excellent combination of tensile strength, elongation, flexibility, and resilience for demanding concrete construction and water-containment applications.

EVERLASTIC® SBR Hi-Tensile Rubber Waterstop exceeds the complete U.S. Army Corps of Engineers Specification CRD-C 513-71 for Rubber Waterstops.

High-Tensile SBR for Concrete Waterstops

Concrete structures used to contain or exclude water require special attention at construction and expansion joints.

Even when the surrounding concrete is watertight, the joint between concrete placements can create a potential path for water.

EVERLASTIC® SBR Waterstop is embedded directly into the concrete joint to create a continuous physical barrier against water passage.

Its high-tensile SBR construction provides the combination of strength and flexibility required for long-term embedment in concrete structures.

Key Features & Benefits

  • High-tensile SBR rubber construction
  • Exceeds CRD-C 513-71
  • Williams Products Specification 2010
  • Designed for concrete waterstop applications
  • Helps prevent water passage through concrete joints
  • Excellent tensile strength
  • Excellent elongation and flexibility
  • Resilient rubber construction
  • Designed for long-term embedment in concrete
  • Suitable for water-containment applications
  • Available in multiple waterstop profiles and configurations
  • Fittings and joining systems available
  • Suitable for new concrete construction and infrastructure projects

U.S. Army Corps of Engineers CRD-C 513-71

CRD-C 513-71 is a U.S. Army Corps of Engineers specification for rubber waterstops used in concrete construction.

EVERLASTIC® SBR Hi-Tensile Rubber Waterstop is manufactured to exceed the complete requirements of CRD-C 513-71, providing contractors, engineers, and specifiers with a high-performance rubber waterstop for demanding concrete structures.

The specification addresses physical characteristics important to rubber waterstop performance, including properties such as:

  • Tensile strength
  • Elongation
  • Hardness
  • Compression set
  • Water absorption
  • Aging characteristics
  • Material durability

These properties are particularly important for a material that becomes permanently embedded within a concrete structure.

How Does a Rubber Waterstop Work?

A waterstop is positioned across a concrete joint before the adjoining concrete placements are completed.

During the first concrete placement, one portion of the waterstop becomes embedded in the concrete while the remaining portion extends into the location of the adjoining placement.

When the next section of concrete is poured, the remaining portion becomes embedded in the new concrete.

This creates a continuous rubber barrier through the joint, making it difficult for water to travel directly through the interface between the concrete placements.

Unlike a surface-applied sealant, the waterstop becomes an integral part of the concrete joint.

Designed for Water-Containing Concrete Structures

SBR rubber waterstop is particularly well suited for concrete structures where the primary objective is controlling the passage of water.

Typical applications include:

  • Water treatment facilities
  • Concrete water tanks
  • Reservoirs
  • Dams
  • Spillways
  • Concrete channels
  • Basins
  • Tunnels
  • Foundations
  • Retaining structures
  • Below-grade concrete
  • Pump stations
  • Water-control structures
  • Municipal infrastructure
  • Industrial water-containment structures
  • Concrete vaults and chambers
  • Civil construction

Construction Joints

Construction joints occur where one concrete placement ends and another begins.

These joints can create a potential path for water infiltration or leakage.

Embedding EVERLASTIC® SBR Waterstop across the construction joint creates a continuous internal barrier between the two concrete placements, helping prevent water from traveling through the joint.

This makes SBR Waterstop particularly valuable in tanks, reservoirs, basins, foundations, channels, and other concrete structures exposed to water.

Expansion & Movement Joints

Concrete structures also require joints that accommodate movement caused by temperature changes, shrinkage, settlement, and other conditions.

Appropriate EVERLASTIC® Waterstop profiles can be incorporated into these joints to provide a water barrier while allowing the joint to function as designed.

Waterstop selection should consider:

  • Anticipated joint movement
  • Joint configuration
  • Concrete thickness
  • Water pressure
  • Installation conditions
  • Project specifications

Why High-Tensile SBR?

SBR, or Styrene-Butadiene Rubber, is widely used in demanding rubber applications because of its combination of mechanical strength, flexibility, abrasion resistance, and durability.

For waterstop applications, these properties provide a material capable of withstanding the stresses associated with installation, concrete placement, structural movement, and long-term service.

EVERLASTIC® SBR Waterstop provides the high tensile strength and elongation necessary to remain flexible while maintaining the integrity of the water barrier.

Waterstop Profiles & Configurations

Different concrete joints require different waterstop profiles.

EVERLASTIC® SBR Waterstop is available in configurations designed to address a variety of construction and movement conditions.

Depending on project requirements, waterstop profiles may be selected for:

  • Construction joints
  • Expansion joints
  • Movement joints
  • Water-containment structures
  • Water-exclusion structures
  • Straight runs
  • Corners and intersections

Contact Williams Products with your project drawings or specifications for assistance identifying the appropriate waterstop configuration.

Fittings & Continuous Waterstop Systems

A successful waterstop installation requires continuity throughout the joint system.

Corners, intersections, transitions, and connections must maintain the water barrier established by the straight sections of waterstop.

Williams Products offers waterstop fittings and joining solutions for project-specific configurations.

Waterstop systems can incorporate:

  • Straight connections
  • Corners
  • Tees
  • Crosses
  • Directional changes
  • Factory-fabricated fittings
  • Field connections

Properly designed connections help create a continuous waterstop system throughout the concrete structure.

SBR vs. Neoprene Waterstop

Williams Products offers both EVERLASTIC® SBR and EVERLASTIC® Neoprene Waterstop, allowing the waterstop material to be matched to the requirements of the application.

EVERLASTIC® SBR Waterstop is an excellent choice for general water-containment and water-exclusion applications where high tensile strength, flexibility, and durability are required.

EVERLASTIC® Neoprene Waterstop can be considered for more demanding environments involving wastewater, sewage, oils, or certain chemical exposures where the additional resistance properties of neoprene may be desirable.

The appropriate polymer should always be selected based on the project specifications and expected service environment.

Built for Demanding Concrete Infrastructure

EVERLASTIC® SBR Waterstop is designed for concrete structures where water control and long-term joint performance are critical.

Its combination of high tensile strength, elongation, resilience, and durability makes it an excellent choice for civil, municipal, industrial, and water infrastructure projects.

Industries & Markets Served

Concrete Construction | Water Treatment | Water-Containment Structures | Dams & Reservoirs | Municipal Infrastructure | Tunnels | Civil Construction | Industrial Construction | Concrete Infrastructure

Why Choose EVERLASTIC® SBR Waterstop?

EVERLASTIC® SBR Waterstop combines:

High-Tensile SBR Rubber
CRD-C 513-71 Performance
Excellent Strength & Elongation
Multiple Waterstop Profiles
Fittings & Joining Solutions

The result is a durable rubber waterstop system designed for concrete structures where controlling the passage of water through joints is critical.

Material selection should be based on the applicable project plans, engineering requirements, load conditions, environmental exposure, and intended application. MIL-C-882 and AASHTO references should be verified against the current project specification before material is supplied or installed.

Sectors

Information

Contact us

Need Everlastic® SBR Waterstop?

Contact Williams Products for pricing, availability, specifications, and custom fabrication options.

Send us a message

"*" indicates required fields