Williams Products

Precast

Precast

EVERLASTIC® HT40 – High Tensile 40 Durometer Neoprene

ASTM D2000 BC420 | High-Tensile Solid Neoprene Rubber | Precast Concrete Bearing Pads, Gaskets & Isolation Components

High-Tensile Neoprene for Precast Concrete & Infrastructure Construction

Williams Products’ EVERLASTIC® HT40 High Tensile Neoprene is a solid elastomeric rubber material designed for construction applications requiring flexibility, tensile strength, resilience, and dependable performance.

Manufactured to meet ASTM D2000 BC420, EVERLASTIC® HT40 combines a nominal 40
Shore A durometer hardness with the physical-property requirements associated with its specified rubber classification.

This material is an excellent option for precast concrete manufacturers, wastewater treatment equipment suppliers, contractors, and construction distributors seeking a hightensile neoprene material for fabricated pads, gaskets, seals, and isolation components.

Its softer 40 durometer composition allows the material to conform to minor surface irregularities while maintaining the strength and durability needed for suitable construction applications.

Unlike closed-cell sponge rubber, EVERLASTIC® HT40 is manufactured from solid neoprene rubber, making it useful for applications where a noncellular elastomer is specified.

Williams Products offers custom fabrication of EVERLASTIC® HT40 into pads, strips, gaskets, sheets, and specialty shapes for precast concrete, wastewater treatment, and infrastructure projects.

Key Features & Benefits

  • 40 Shore A Durometer: Flexible solid rubber that provides cushioning and conformity at adjoining surfaces.
  • ASTM D2000 BC420: Specified rubber classification for applications requiring defined elastomeric material properties.
  • High-Tensile Neoprene: Designed for applications requiring stronger tensile performance than general-purpose, lower-tensile commercial rubber.
  • Solid Rubber Construction: Noncellular material suitable for fabricated pads, gaskets, and isolation components.
  • Resilient Cushioning: Helps reduce direct contact between adjoining concrete and steel components.
  • Surface Irregularity Accommodation: Flexible material helps conform to minor variations in contact surfaces.
  • Moisture & Weather Resistance: Neoprene provides useful resistance to moisture and environmental exposure in appropriate applications.
  • Versatile Fabrication: Can be converted into pads, strips, gaskets, and specialty components.
  • Construction Industry Applications: Suitable for consideration in precast concrete, wastewater treatment, municipal infrastructure, and building construction.

Typical Precast Concrete Applications

1. Precast Concrete Wall Panels

Precast concrete wall panels frequently incorporate elastomeric materials at designated support, separation, and connection locations.

EVERLASTIC® HT40 can be fabricated into custom pads or strips to provide cushioning and isolation between precast components and adjoining structures.

Typical applications include:

  • Precast wall panel separation pads
  • Concrete panel-to-steel contact interfaces
  • Precast panel cushioning
  • Architectural precast connections
  • Wall panel isolation components
  • Specialty precast connection details

The material’s 40 durometer hardness allows it to conform to minor variations between contact surfaces.

For structural load-bearing connections, the project engineer must verify the material’s compressive properties and suitability.

2. Precast Concrete Beams & Structural Components

Precast concrete beams and other structural components may require elastomeric materials at designated contact or bearing locations.

EVERLASTIC® HT40 can be considered for properly engineered applications requiring a flexible, high-tensile solid rubber material.

Potential applications include:

  • Precast beam cushioning pads
  • Concrete-to-steel separation
  • Concrete-to-concrete isolation
  • Structural component contact protection
  • Specialty precast bearing interfaces
  • Custom support and isolation components

HT40 provides a resilient material option where the project specification calls for its hardness and physical properties.

Important: ASTM D2000 BC420 is a material classification, not an independent structural bearing-pad design standard. Load-bearing suitability must be verified separately.

3. Precast Utility Vaults & Underground Structures

Precast concrete utility vaults, underground enclosures, and municipal infrastructure components may incorporate rubber materials for cushioning, separation, and sealing.

EVERLASTIC® HT40 can be fabricated into components for:

  • Precast utility vault assemblies
  • Underground concrete structures
  • Concrete access enclosures
  • Equipment mounting interfaces
  • Precast component separation
  • Specialty utility infrastructure connections

Its flexible solid rubber construction makes it useful for custom-fabricated components where a high-tensile neoprene material is required.

For sealing applications, joint geometry, compression, exposure conditions, and waterpressure requirements must be evaluated.

4. Precast Concrete Stair & Landing Assemblies

Precast concrete stairs and landings may incorporate elastomeric pads at support and isolation locations.

EVERLASTIC® HT40 may be used for:

  • Stair landing cushioning
  • Concrete-to-steel isolation pads
  • Precast stair separation components
  • Specialty stair support details
  • Custom rubber pads for precast assemblies

Its flexibility helps accommodate minor surface irregularities while separating adjoining construction materials.

5. Architectural Precast Concrete Components

Architectural precast concrete construction often requires custom rubber materials to protect adjoining components and provide controlled separation.

Typical applications include:

  • Architectural panel cushioning
  • Decorative precast component isolation
  • Concrete-to-metal separation strips
  • Specialty façade components
  • Custom rubber gaskets
  • Precast panel contact protection

EVERLASTIC® HT40 can be fabricated into project-specific dimensions to meet these applications.

6. Precast Concrete Equipment Foundations

Precast equipment foundations and support assemblies may require elastomeric pads or strips for cushioning and contact isolation.

Potential applications include:

  • Equipment mounting pads
  • Steel-to-concrete separation
  • Precast equipment pedestal interfaces
  • General-purpose machinery cushioning
  • Specialty support assemblies
  • Custom equipment isolation components

Actual vibration isolation performance depends on loading, material stiffness, geometry, and operating frequency and should be evaluated for the intended equipment.

EVERLASTIC® HT40 in Wastewater Treatment Construction

High-Tensile Neoprene for Wastewater Treatment Facilities

Wastewater treatment facilities incorporate extensive precast concrete, cast-in-place concrete, steel equipment, piping, tanks, and mechanical systems.

These facilities frequently require elastomeric materials for cushioning, isolation, gasket fabrication, and separation between adjoining components.

EVERLASTIC® HT40 is particularly well suited for consideration in wastewater treatment applications requiring ASTM D2000 BC420 neoprene.

Its combination of flexibility and high-tensile material properties makes it useful for a variety of custom-fabricated components.

1. Wastewater Treatment Equipment Pads

Wastewater treatment equipment is frequently installed on concrete foundations and support structures.

EVERLASTIC® HT40 can be fabricated into pads for:

  • Pump equipment cushioning
  • Steel equipment base separation
  • Concrete equipment pedestal interfaces
  • General-purpose equipment mounting pads
  • Specialty mechanical support components

The material provides a flexible interface between equipment and supporting surfaces.

Equipment loads, vibration requirements, and environmental exposure must be considered during material selection.

2. Pipe Support & Isolation Pads

Wastewater treatment facilities incorporate piping systems that may require rubber cushioning or separation at support locations.

Potential applications include:

  • Pipe support cushioning
  • Steel pipe-to-concrete separation
  • Pipe saddle pads
  • Mechanical support isolation
  • Custom pipe support liners
  • Specialty piping system components

HT40 can be fabricated into custom strips and pads to accommodate specific support dimensions.

3. Wastewater Treatment Gaskets & Sealing Components

Solid neoprene is used in a variety of gasket and sealing applications where its physical properties and chemical compatibility are appropriate.

EVERLASTIC® HT40 can be fabricated into:

  • Equipment flange gaskets
  • Access cover gaskets
  • Mechanical equipment seals
  • Custom rectangular gaskets
  • Specialty equipment sealing components
  • Rubber sealing strips

The material’s flexibility helps it conform to properly designed mating surfaces under compression.

Chemical compatibility must be verified for the actual wastewater, cleaning chemicals, disinfectants, and operating conditions. ASTM D2000 BC420 alone does not establish suitability for every wastewater chemical or watertight joint.

4. Precast Wastewater Structures

Precast concrete structures are widely used in wastewater collection and treatment systems.

EVERLASTIC® HT40 may be considered for custom rubber components used in:

  • Precast wastewater vaults
  • Pump station structures
  • Concrete equipment enclosures
  • Access structure components
  • Specialty precast treatment structures
  • Equipment support and separation assemblies

Where watertight structural joints are required, use must be evaluated against the applicable joint and gasket specifications.

Why High-Tensile Neoprene Is Important in Precast Concrete Construction

Precast concrete assemblies often combine rigid structural components with steel connections, equipment, and adjoining concrete surfaces.

Rubber materials are used to provide cushioning, separation, flexibility, and sealing at designated locations.

EVERLASTIC® HT40 offers several advantages for applications requiring a high-tensile solid elastomer.

Flexible Cushioning

Its 40 Shore A hardness provides a relatively soft, resilient rubber material capable of accommodating minor surface variations.

Tensile Strength

High-tensile neoprene is intended for applications where resistance to stretching and tearing forces is important. Actual tensile strength and tear resistance must be confirmed from the material test data.

Structural Separation

The material can reduce direct contact between adjoining concrete and steel surfaces.

Custom Gasket Fabrication

HT40 can be fabricated into custom gaskets and sealing components for equipment and concrete assemblies.

Construction Versatility

The same material can be used in multiple suitable applications, including cushioning pads, isolation strips, gaskets, and specialty fabricated components.

Understanding ASTM D2000 BC420

ASTM D2000 is a standardized classification system used to identify rubber materials based on specified physical-property requirements.

The designation BC420 identifies a particular elastomeric material classification.

Designation Meaning

ASTM D2000 Standard classification system for rubber products

B Type B heat-resistance classification

C Class C oil-swell resistance classification

4 Nominal hardness of 40 Shore A

20 Minimum tensile strength designation of 20 MPa, approximately 2,900 PSI

ASTM D2000 BC420 therefore specifies a nominal 40 durometer rubber with a minimum tensile strength designation of approximately 2,900 PSI, along with the applicable type and class requirements.

The complete ASTM D2000 line callout, including any additional suffix requirements, should be reviewed to confirm the full specification.

EVERLASTIC® HT40 vs. Commercial Grade Neoprene

Williams Products offers multiple neoprene materials for construction applications.

EVERLASTIC® HT40 is intended for projects requiring high-tensile material properties and the specified ASTM D2000 classification.

Feature EVERLASTIC® HT40
EVERLASTIC® 1200 Series
Commercial Neoprene

Material Solid Neoprene Rubber Solid Neoprene Rubber

Hardness 40 Shore A
Available in Multiple Hardness
Grades

Material
Classification
ASTM D2000 BC420 Commercial Grade

Tensile Strength
BC420 Minimum Tensile
Designation
Per Selected Commercial Grade

Primary
Applications
High-Tensile Pads, Gaskets &
Isolation Components
General Cushioning, Separation &
Approved Bearing Uses

Custom
Fabrication
Yes Yes

EVERLASTIC® HT40 is the preferred option when the project specification explicitly requires ASTM D2000 BC420 material.

Material Specifications

Property Specification

Product Name EVERLASTIC® HT40 High Tensile Neoprene

Material Solid Neoprene Rubber

Hardness 40 Shore A Durometer

Material Classification ASTM D2000 BC420

Tensile Strength
Designation
Minimum 20 MPa (Approximately 2,900 PSI)

Construction Solid / Noncellular Rubber

Primary Functions
Cushioning, Isolation, Gasketing & Approved Bearing
Applications

Available Forms Sheets, Strips, Pads, Gaskets & Custom-Cut Pieces

Available Dimensions Custom Thicknesses, Widths & Lengths

Fabrication Precision Cutting, Slitting & Die-Cutting

Primary Markets
Precast Concrete, Wastewater Treatment, Infrastructure &
Building Construction

Published material properties and ASTM D2000 compliance should be verified against the current EVERLASTIC® HT40 technical data sheet and applicable material test reports. Structural bearing suitability and sealing performance require separate application-specific evaluation.

Custom Fabrication for Precast Concrete Manufacturers

Williams Products understands the importance of consistent dimensions, reliable material supply, and fabrication flexibility for precast concrete and infrastructure projects.

We offer EVERLASTIC® HT40 in custom configurations, including:

  • Rectangular neoprene pads
  • Square cushioning pads
  • Custom-width isolation strips
  • Specialty neoprene gaskets
  • Equipment mounting pads
  • Custom thicknesses
  • Project-specific widths and lengths
  • Die-cut rubber components
  • Specialty shapes for precast assemblies

Our fabrication capabilities help precast manufacturers, contractors, and equipment suppliers receive rubber components ready for installation.

Whether you require a small quantity for a specialty project or production quantities for ongoing manufacturing, Williams Products can assist with your requirements.

Material selection should be based on the specific application, temperature, pressure, chemical exposure, and project requirements. Compatibility with the particular wastewater chemistry or treatment chemical should be verified before use. ASTM D2000 classification does not by itself establish suitability for every wastewater or chemical-service application.

Sectors

Information

Contact us

Need EVERLASTIC® HT40?

Contact Williams Products for pricing, availability, material specifications, and custom fabrication options.

Send us a message

"*" indicates required fields