Williams Products

Precast

Precast

EVERLASTIC® 1056 JF – Closed Cell Sponge Expansion Joint Filler

High-Performance Compressible Joint Filler & Bond Breaker for Masonry Construction

Reliable Expansion Joint Protection, Movement Accommodation & Bond Breaking for Masonry Construction

Williams Products’ EVERLASTIC® 1056 JF is a flexible, compressible closed cell sponge rubber joint filler designed for masonry and concrete construction applications requiring movement accommodation, joint separation, and long-term durability.

Engineered to help accommodate thermal expansion, contraction, and minor structural movement, EVERLASTIC® 1056 JF provides a dependable solution for expansion joints, isolation joints, and separation joints throughout masonry construction.

Its closed cell construction helps resist moisture absorption, while its compressibility allows the material to accommodate movement between adjoining masonry components without creating excessive resistance.

EVERLASTIC® 1056 JF also functions as a bond breaker, helping prevent unwanted bonding between adjoining construction materials and allowing designated joints to move as intended.

From brick veneer and concrete masonry walls to architectural masonry, building façades, and masonry-to-concrete interfaces, EVERLASTIC® 1056 JF provides a practical solution for managing movement and protecting joint assemblies.

Available in custom-cut strips, sheets, and fabricated configurations, EVERLASTIC® 1056 JF can be supplied to meet the dimensional requirements of masonry contractors, distributors, and commercial construction projects.

Key Features & Benefits

  • Compressible Expansion Joint Filler: Helps accommodate thermal expansion, contraction, and minor movement between adjoining masonry components.
  • Inherent Bond Breaker: Helps prevent unwanted adhesion between adjoining construction materials, allowing joints to function as designed.
  • Closed Cell Construction: Helps resist moisture absorption and water penetration through the sponge material.
  • Flexible & Resilient: Provides cushioning while accommodating movement and dimensional variations.
  • Joint Separation: Creates a compressible separation layer between adjoining masonry and concrete components.
  • Reduces Stress Concentrations: Helps minimize direct contact and localized stress between adjoining materials.
  • Easy Installation: Lightweight material can be installed during masonry construction or joint preparation.
  • Custom Fabrication: Available in strips, sheets, and custom-cut configurations to reduce jobsite cutting and material waste.

Typical Masonry Construction Applications

1. Brick Masonry Expansion Joints

Brick masonry walls expand and contract as temperatures and moisture conditions change. Properly designed expansion joints allow this movement to occur without creating excessive stress within the wall assembly.

EVERLASTIC® 1056 JF provides a compressible joint filler for brick masonry expansion joints.

Common applications include:

  • Vertical expansion joints in brick veneer
  • Expansion joints between adjoining brick wall sections
  • Separation joints at changes in wall geometry
  • Joints near building corners and offsets
  • Expansion joints adjacent to structural elements
  • Compressible joint filler behind compatible sealant systems

Its compressible construction helps accommodate movement while maintaining separation between adjoining masonry surfaces.

When used as part of a properly designed joint assembly, 1056 JF helps reduce direct contact between adjoining materials.

2. Concrete Masonry Unit (CMU) Control & Isolation Joints

Concrete masonry walls require properly located movement joints to accommodate shrinkage, temperature changes, and other anticipated movement.

EVERLASTIC® 1056 JF can be used as a compressible filler or isolation material in appropriately designed CMU joint assemblies.

Typical applications include:

  • CMU isolation joints
  • Separation joints between masonry wall sections
  • Compressible fillers at masonry-to-concrete interfaces
  • Isolation around structural columns
  • Joint fillers at changes in wall construction
  • Nonstructural separation joints

The material’s flexibility allows it to accommodate minor movement while helping prevent direct contact between adjoining masonry components.

CMU control joints must be designed to accommodate anticipated movement and meet applicable masonry construction requirements.

3. Masonry-to-Concrete Expansion & Isolation Joints

Masonry construction frequently interfaces with concrete foundations, columns, beams, and other structural elements.

Because different construction materials can experience different movement characteristics, proper isolation is important.

EVERLASTIC® 1056 JF provides a compressible separation material for these interfaces.

Common applications include:

  • Brick-to-concrete separation joints
  • Masonry wall-to-column isolation
  • Masonry-to-foundation interfaces
  • Separation between masonry and structural concrete
  • Compressible fillers at designated movement joints
  • Non-load-bearing isolation applications

Its inherent bond-breaking characteristics help prevent unwanted bonding between adjoining materials, allowing designated movement joints to function as intended.

4. Architectural Masonry & Building Façades

Architectural masonry systems often incorporate multiple materials, wall configurations, and movement joints.

EVERLASTIC® 1056 JF can be incorporated into:

  • Architectural brick façades
  • Decorative masonry wall assemblies
  • Masonry expansion joints
  • Vertical and horizontal separation joints
  • Exterior wall movement joints
  • Masonry-to-metal interfaces
  • Nonstructural architectural joint assemblies

Its closed cell construction and compressibility make it suitable for consideration in exposed masonry applications where moisture resistance and movement accommodation are important.

5. Masonry Walls at Structural Columns & Building Interfaces

Masonry walls frequently terminate against structural steel columns, concrete columns, and other building components.

These interfaces may require compressible separation materials to accommodate differential movement and reduce unwanted contact.

EVERLASTIC® 1056 JF can be used for:

  • Masonry-to-steel column isolation
  • Masonry-to-concrete column separation
  • Non-load-bearing wall isolation
  • Separation at structural frame interfaces
  • Compressible fillers around designated openings
  • Specialty masonry joint applications

Its flexibility helps accommodate dimensional variations while providing a separation layer between adjoining materials.

6. Masonry Parapets & Exterior Wall Assemblies

Masonry parapets and exterior wall assemblies are frequently exposed to temperature changes, moisture, and movement.

EVERLASTIC® 1056 JF may be used as a compressible filler in appropriately designed movement joints.

Typical applications include:

  • Parapet wall expansion joints
  • Exterior masonry separation joints
  • Movement joints at wall transitions
  • Isolation between adjoining masonry components
  • Compressible filler behind compatible joint sealants
  • Architectural masonry movement joints

Its closed cell structure helps limit moisture absorption while providing a compressible material for joint movement.

Expansion Joint Filler & Inherent Bond Breaker

Two Important Functions in One Material

One of the primary advantages of EVERLASTIC® 1056 JF is its ability to function as both a compressible expansion joint filler and a bond breaker.

Expansion Joint Filler

Masonry and concrete materials expand and contract due to temperature changes, moisture variations, and other environmental conditions.

Without properly designed movement joints, these forces can contribute to cracking, displacement, and deterioration.

EVERLASTIC® 1056 JF provides a compressible material within designated joints, helping accommodate movement and maintain separation between adjoining surfaces.

Bond Breaker

A bond breaker helps prevent unwanted adhesion between materials that are intended to remain separated.

EVERLASTIC® 1056 JF can provide a physical separation layer that helps prevent direct bonding between adjoining masonry and concrete components.

This helps preserve the intended movement characteristics of properly designed joints.

Where a joint sealant is used, compatibility and the required two-sided sealant adhesion must be evaluated separately. Joint filler does not automatically replace backer rod or other specified bond-breaking materials.

Why Compressible Joint Fillers Are Important in Masonry Construction

Brick, concrete masonry, and structural building components respond differently to temperature changes, moisture, shrinkage, and movement.

Without properly designed expansion and isolation joints, these differences can create stress within masonry wall assemblies.

Potential problems include:

  • Cracking in brick and CMU walls
  • Stress concentrations at structural interfaces
  • Damage at adjoining material connections
  • Joint deterioration
  • Unwanted contact between building components
  • Reduced long-term performance of masonry assemblies

EVERLASTIC® 1056 JF helps address these challenges by providing a flexible, compressible separation layer.

Its closed cell construction and bond-breaking characteristics make it a practical material option for properly designed masonry expansion and isolation joints.

Material Specifications

Property Specification

Product Name EVERLASTIC® 1056 JF

Product Type Compressible Expansion Joint Filler

Material Closed Cell Sponge Rubber

Cell Structure Closed Cell

Primary Function Expansion Joint Filler & Bond Breaker

Compression Characteristics Flexible & Compressible

Moisture Resistance Closed Cell Construction

Available Forms Sheets, Strips & Custom-Cut Pieces

Fabrication Custom Cutting, Slitting & Fabrication

Primary Markets Masonry, Concrete & Commercial Building Construction

Typical Applications Expansion Joints, Isolation Joints & Separation Joints

Specific ASTM classifications, physical properties, compression-deflection values, temperature limitations, and dimensional tolerances should be confirmed using the current EVERLASTIC® 1056 JF technical data sheet.

Custom Fabrication for Masonry Contractors & Distributors

At Williams Products, we understand that masonry contractors and distributors require dependable materials, consistent dimensions, and products that are easy to install.

We offer EVERLASTIC® 1056 JF in a variety of fabricated configurations, including:

  • Custom-width expansion joint strips
  • Continuous-length joint filler strips
  • Custom-cut sheets
  • Specialty joint filler dimensions
  • Fabricated separation and isolation pieces
  • Project-specific material configurations

Our fabrication capabilities help contractors reduce jobsite cutting and preparation time while maintaining consistent joint dimensions.

Whether you require material for a commercial masonry project or ongoing inventory for distribution, Williams Products can assist with your requirements.

Product selection should be based on project requirements, design conditions, environmental exposure, and applicable project specifications. ASTM D1056 classification does not by itself indicate suitability for every application.

Sectors

Information

Contact us

Need EVERLASTIC® 1056 JF for Your Project?

Williams Products provides quality cellular rubber materials and custom fabrication for concrete and construction applications. Contact us for pricing, availability, and custom fabrication options.

Send us a message

"*" indicates required fields