Precast
Precast
HDPE Shims – High-Density Polyethylene Shims for Concrete & Precast Construction
Plastic Leveling Shims | Precast Concrete Installation | Concrete Panel Alignment | Structural Spacing & Construction Shimming
Durable HDPE Shims for Concrete & Precast Concrete Construction
Williams Products supplies High-Density Polyethylene (HDPE) Shims for concrete contractors, precast concrete manufacturers, erectors, masonry contractors, and construction distributors.
HDPE shims provide a durable, moisture-resistant solution for leveling, alignment, spacing, and positioning concrete and precast components during construction and installation.
Proper alignment is essential in concrete construction. Precast wall panels, structural concrete components, architectural precast elements, and equipment foundations frequently require precise positioning to achieve the specified elevation, spacing, and fit.
HDPE shims can be placed at designated contact points to make adjustments during installation while maintaining consistent spacing between adjoining materials.
Unlike wood shims, HDPE shims do not absorb water in the same manner, swell from moisture exposure, or deteriorate through biological decay.
Their rigid plastic construction provides a practical alternative for applications requiring dimensional consistency and moisture resistance.
Williams Products offers HDPE shims in a variety of thicknesses, dimensions, and customcut configurations to meet project-specific concrete construction requirements.
Key Features & Benefits
- High-Density Polyethylene Construction: Durable, rigid plastic material for construction shimming applications.
- Accurate Leveling & Alignment: Helps position concrete and precast components at the required elevation.
- Consistent Spacing: Provides controlled separation between adjoining materials.
- Moisture Resistant: HDPE has low water absorption and does not swell like wood.
- Noncorrosive Material: Will not rust or corrode like metal shims.
- Rot Resistant: Does not decay from biological rot.
- Lightweight & Easy to Handle: Convenient for concrete installation crews and precast erectors.
- Multiple Thickness Options: Allows installers to select or combine approved thicknesses to achieve the required elevation.
- Custom Fabrication: Available in custom dimensions and specialty configurations.
- Versatile Construction Applications: Useful in precast concrete, architectural concrete, masonry, and general building construction.
Typical Concrete & Precast Concrete Applications
1. Precast Concrete Wall Panel Leveling
Precast concrete wall panels require accurate positioning during erection and installation.
HDPE shims can be used at designated locations to help establish the proper elevation and alignment before final connections or grouting.
Typical applications include:
- Precast wall panel leveling
- Concrete panel elevation adjustment
- Architectural precast wall installation
- Precast panel-to-foundation interfaces
- Concrete wall alignment
- Specialty precast erection applications
HDPE shims provide a consistent thickness that helps installers make controlled adjustments during the erection process.
Where shims remain beneath load-bearing panels, their suitability must be verified by the project engineer.
2. Architectural Precast Concrete Installation
Architectural precast concrete components frequently require precise alignment to maintain consistent joint widths and finished appearance.
HDPE shims help installers position components accurately.
Typical applications include:
- Architectural concrete wall panels
- Decorative precast elements
- Concrete façade installation
- Precast trim and architectural features
- Panel-to-panel alignment
- Concrete component spacing
Their moisture-resistant construction makes them useful for exterior construction environments.
3. Precast Concrete Stair & Landing Installation
Precast concrete stairs and landings must be installed at the correct elevation and alignment.
HDPE shims may be used during installation to make minor positioning adjustments.
Potential applications include:
- Precast stair leveling
- Concrete landing alignment
- Stair-to-structure positioning
- Concrete step installation
- Specialty precast stair assemblies
Shim placement and permanent loading requirements must be reviewed as part of the installation design.
4. Precast Concrete Utility Structures
Precast utility vaults, drainage structures, and concrete enclosures may require leveling and spacing during installation.
HDPE shims can assist with:
- Utility vault leveling
- Precast concrete enclosure alignment
- Concrete access structure positioning
- Specialty underground precast installations
- Concrete component spacing
- Installation adjustment
HDPE’s low water absorption makes it a practical material for consideration in moistureexposed construction environments.
5. Concrete Equipment Foundations
Equipment installed on concrete foundations often requires precise alignment and elevation adjustment.
HDPE shims can be used for suitable positioning applications.
Potential uses include:
- Equipment base alignment
- Concrete pedestal leveling
- Machinery positioning
- Steel base plate adjustment
- Equipment installation spacing
- Specialty construction leveling
For heavily loaded equipment or permanent support applications, the engineer must verify the shim material’s compressive strength, creep resistance, and long-term suitability.
6. Concrete-to-Steel Construction Interfaces
Steel components installed on concrete surfaces may require shimming to achieve proper alignment.
HDPE shims can be used in suitable applications involving:
- Steel framing alignment
- Concrete-to-steel spacing
- Steel bracket positioning
- Base plate leveling
- Specialty steel connection installation
- Construction adjustment
The use of HDPE shims in structural steel connections must be approved by the responsible engineer.
7. Precast Concrete Parking Structures
Precast parking structures incorporate multiple structural components that require accurate positioning during erection.
HDPE shims may be used as temporary or permanent positioning aids where permitted by the project design.
Potential applications include:
- Precast parking structure component alignment
- Concrete wall panel leveling
- Architectural parking structure components
- Concrete-to-concrete spacing
- Specialty precast erection details
The required shim dimensions and loading characteristics depend on the specific installation.
Why HDPE Shims Are Important in Concrete Construction
Concrete construction requires accurate positioning of components to achieve proper alignment, elevation, and fit.
Small dimensional variations can occur during manufacturing, transportation, and installation.
Shims provide a practical method for making controlled adjustments without modifying the concrete components.
Accurate Leveling
HDPE shims help installers establish the correct elevation at designated contact points.
Consistent Joint Spacing
Shims can help maintain uniform spacing between adjoining concrete components.
Moisture Resistance
HDPE absorbs very little water and is not subject to moisture-related swelling in the same manner as wood.
Noncorrosive Construction
HDPE will not rust, making it useful in environments where metal corrosion is a concern.
Installation Efficiency
Precut shims can reduce field preparation time and allow installers to make adjustments quickly.
Custom Thicknesses
Multiple thickness options help installers achieve the required positioning without excessive field modification.
HDPE Shims vs. Wood & Steel Shims
Different shimming materials offer different advantages depending on the application.
Feature HDPE Shims Wood Shims Steel Shims
Material
High-Density
Polyethylene
Wood Steel
Moisture Absorption Very Low Can Absorb Moisture
Does Not Absorb
Water
Rust Resistance Will Not Rust Not Applicable Depends on Protection
Rot Resistance Will Not Rot Can Decay Not Applicable
Lightweight Yes Yes Generally Heavier
Custom
Thicknesses
Yes Yes Yes
Field Handling Easy Easy Application Dependent
Permanent
Structural Support
Requires Engineering
Verification
Requires Engineering
Verification
Requires Engineering
Verification
Long-Term Creep Must Be Evaluated Must Be Evaluated
Generally Much Lower
Than Plastics
HDPE shims offer an effective alternative to wood for applications requiring moisture resistance, dimensional consistency, and noncorrosive construction.
Material Specifications
Property Specification
Product Name HDPE Shims
Material High-Density Polyethylene
Material Type Rigid Thermoplastic
Primary Function Leveling, Alignment, Spacing & Positioning
Moisture Resistance Low Water Absorption
Corrosion Resistance Noncorrosive
Available Forms Individual Shims, Strips & Custom-Cut Pieces
Available Thicknesses Multiple Options – Contact Williams Products
Available Dimensions Standard & Custom Sizes
Fabrication Precision Cutting & Specialty Shapes
Primary Markets Concrete, Precast Concrete, Masonry & Building Construction
Specific material grade, compressive strength, dimensional tolerances, temperature limitations, and creep performance should be confirmed from the current material technical data sheet. Permanent load-bearing use requires engineering approval.
Custom HDPE Shim Fabrication
Williams Products understands that concrete contractors and precast manufacturers require consistent dimensions and dependable materials.
We can supply HDPE shims in configurations tailored to project requirements.
Custom fabrication options include:
- Rectangular leveling shims
- Square HDPE shims
- Custom thicknesses
- Precut spacing strips
- Specialty shim dimensions
- Custom lengths and widths
- Project-specific configurations
- Production quantities for precast manufacturers
- Specialty shapes for concrete installation
Whether you need shims for architectural precast installation, concrete panel leveling, or general construction alignment, Williams Products can assist with your requirements.
Material selection should be based on the applicable project plans, engineering requirements, load conditions, environmental exposure, and intended application. MIL-C882 and AASHTO references should be verified against the current project specification before material is supplied or installed.
Sectors
Information
Tech data/spec sheet
Safety data sheet
Cut sheet
Contact us
Need Everlastic® J Gate Seal?
Contact Williams Products for pricing, availability, specifications, and custom fabrication options.
Send us a message
"*" indicates required fields