Masonry
Masonry
Everlastic® 1056-JF
ASTM D1056 Closed-Cell Joint Filler for Masonry Construction
EVERLASTIC® 1056 JF from Williams Products is a flexible, closed-cell joint filler designed for masonry expansion joints, isolation joints, building perimeter joints, and masonry-to-concrete interfaces.
Manufactured from cellular rubber meeting ASTM D1056 2A1 and 2C1, EVERLASTIC® 1056 JF provides the compressibility and resilience needed to accommodate movement while helping maintain separation between adjoining masonry and structural components.
An important advantage of EVERLASTIC® 1056 JF is that the closed-cell material acts as an inherent bond breaker, making it particularly useful in masonry joint assemblies where sealant is installed over the joint filler.
Williams Products can fabricate 1056 JF to your required thickness, width, and length, providing contractors and masonry suppliers with material ready for installation.
Masonry Expansion Joint Filler
Brick, concrete masonry, stone, precast concrete, and other building materials naturally experience movement throughout the life of a structure.
Temperature changes, moisture conditions, drying shrinkage, and normal building movement can create stress when adjoining materials are not provided adequate space to move.
EVERLASTIC® 1056 JF provides a flexible, compressible separation material within masonry expansion and isolation joints, allowing adjoining components to move independently while maintaining the designed joint space.
Key Features & Benefits
- Meets ASTM D1056 2A1 and 2C1
- Closed-cell cellular rubber construction
- Designed for masonry expansion and isolation joints
- Flexible and compressible
- Resilient after compression
- Low water absorption
- Acts as an inherent bond breaker
- Helps prevent unwanted sealant adhesion to the bottom of the joint
- Helps maintain proper joint separation
- Suitable for interior and exterior construction
- Easy to cut and install
- Available in custom thicknesses, widths, and lengths
- Custom fabricated by Williams Products
Inherent Bond Breaker for Sealant Joints
One of the key advantages of EVERLASTIC® 1056 JF is its inherent bond-breaker properties.
In a properly designed sealant joint, the sealant should typically bond to the two opposing sides of the joint rather than the bottom.
Unwanted adhesion to the bottom of the joint can create three-sided adhesion, restricting the sealant’s ability to stretch and compress as the joint moves.
EVERLASTIC® 1056 JF can function as both a compressible joint filler and bond breaker, helping prevent unwanted sealant adhesion to the joint filler below.
This helps promote a properly functioning sealant joint while eliminating the need for a separate bond-breaker material in appropriate applications.
Brick Expansion Joints
Brick masonry requires properly designed expansion joints to accommodate movement caused by temperature changes, moisture expansion, and other building conditions.
EVERLASTIC® 1056 JF can be installed as a compressible filler within vertical and horizontal brick expansion joints, providing separation while allowing movement to occur.
Typical applications include:
- Brick veneer expansion joints
- Exterior brick walls
- Long masonry wall runs
- Building corners
- Changes in wall height
- Masonry openings
- Building transitions
- Brick-to-concrete interfaces
- Brick-to-precast interfaces
Where a sealant joint is incorporated into the assembly, the inherent bond-breaker properties of 1056 JF provide an additional advantage.
CMU & Concrete Masonry Joints
Concrete masonry walls require carefully designed joints to accommodate shrinkage and building movement.
EVERLASTIC® 1056 JF can be incorporated into CMU and concrete masonry joint assemblies where a compressible separation or joint filler material is required.
Applications can include:
- Concrete block walls
- CMU wall systems
- Masonry isolation joints
- Building perimeter joints
- Masonry-to-column interfaces
- Masonry-to-concrete interfaces
- Masonry-to-precast interfaces
- Separation between dissimilar building materials
Masonry-to-Concrete Isolation
Masonry walls frequently intersect structural concrete components such as columns, walls, slabs, beams, and foundations.
Because these materials can move differently, direct rigid contact may create unwanted stresses within the wall assembly.
EVERLASTIC® 1056 JF provides a resilient isolation layer between masonry and structural components, helping maintain separation while accommodating movement.
Typical applications include isolation between masonry and:
- Concrete columns
- Structural walls
- Foundations
- Floor slabs
- Concrete beams
- Precast concrete panels
- Structural framing
- Other rigid building components
Building Perimeter & Exterior Wall Joints
Building-envelope systems contain numerous transitions where masonry meets other construction materials.
EVERLASTIC® 1056 JF can be used as a compressible filler in properly designed joints at these transition points.
Typical locations include:
- Building perimeter joints
- Exterior masonry walls
- Window and door openings
- Architectural masonry
- Stone veneer
- Precast-to-masonry interfaces
- Wall penetrations
- Changes in building materials
- Building additions and transitions
Its closed-cell construction helps limit moisture absorption, making 1056 JF well suited for exterior masonry applications.
Closed-Cell Performance
Masonry joint materials can be exposed to moisture throughout the life of a building.
EVERLASTIC® 1056 JF utilizes closed-cell cellular rubber, helping minimize water absorption while maintaining the flexibility and compressibility required within the joint.
Closed-cell construction provides an important advantage for exterior applications where exposure to moisture, humidity, and changing environmental conditions is expected.
Flexible & Easy to Install
EVERLASTIC® 1056 JF is lightweight, flexible, and easy to handle on the jobsite.
Unlike rigid joint fillers, the material can conform to irregular construction conditions and can be easily cut to accommodate field dimensions.
Williams Products can also fabricate the material before shipment, reducing the amount of cutting required by the installer.
Custom Fabricated for Masonry Construction
Williams Products specializes in converting foam and cellular rubber materials for the construction industry.
EVERLASTIC® 1056 JF can be fabricated specifically for your masonry application.
Material can be supplied to your required:
- Thickness
- Width
- Length
- Quantity
- Custom configuration
Whether you need continuous strips for masonry expansion joints or individual pieces for isolation around structural components, Williams Products can provide 1056 JF ready for installation.
Typical Masonry Applications
EVERLASTIC® 1056 JF is ideal for a wide range of masonry and building construction applications, including:
- Brick expansion joints
- Masonry expansion joints
- Masonry isolation joints
- CMU joint assemblies
- Building perimeter joints
- Brick-to-concrete separation
- Block-to-concrete separation
- Masonry-to-precast interfaces
- Masonry around structural columns
- Window and door openings
- Architectural masonry
- Stone construction
- Building-envelope transitions
- Sealant joint assemblies
Industries & Markets Served
Masonry Construction | Brick Construction | Concrete Masonry | Commercial Construction | Building Envelope | Architectural Masonry | Precast Construction | Industrial Construction
Why Choose EVERLASTIC® 1056 JF?
EVERLASTIC® 1056 JF provides masonry contractors, distributors, architects, and engineers with a versatile joint material that combines:
Expansion Joint Filler | Isolation | Compression | Resilience | Low Water Absorption | Inherent Bond Breaker | Custom Fabrication
Its ability to function as both a compressible masonry joint filler and an inherent bond breaker makes 1056 JF particularly valuable in joint assemblies where sealant will be installed over the filler.
Williams Products can fabricate the material to your project requirements, helping reduce field cutting, material waste, and installation time.
Product selection should be based on project requirements, design conditions, environmental exposure, and applicable project specifications. ASTM D1056 classification does not by itself indicate suitability for every application.
Sectors
Information
Tech data/spec sheet
Safety data sheet
Cut sheet
Contact us
Need Everlastic® 1056-JF for Your Project?
Williams Products provides quality cellular rubber materials and custom fabrication for concrete and construction applications. Contact us for pricing, availability, and custom fabrication options.
Send us a message
"*" indicates required fields