Williams Products

Precast

Precast

EVERLASTIC® ECON-O-FOAM – Polyethylene Foam Expansion Joint Filler, Backer Material & Bond Breaker

1.8 LB Closed-Cell Polyethylene Foam Rolls | Precast Concrete Expansion Joints | Joint Backing | Bond Breaking & Isolation

Economical Polyethylene Foam Rolls for Precast Concrete Construction

Williams Products’ EVERLASTIC® ECON-O-FOAM is a lightweight, flexible 1.8 lb/ft³ density closed-cell polyethylene foam material, supplied in rolls for precast concrete, highway, bridge, and general concrete construction applications.

Designed for use as an expansion joint filler, joint backer material, bond breaker, and separation material, ECON-O-FOAM provides a versatile and economical solution for applications requiring compressibility, flexibility, moisture resistance, and separation between adjoining concrete components.

Precast concrete structures frequently incorporate expansion joints, isolation joints, and construction joints to accommodate movement and prevent unwanted adhesion between adjacent surfaces.

EVERLASTIC® ECON-O-FOAM can be used to fill joint spaces, provide backing for compatible sealants, and create bond-breaking interfaces in properly designed concrete assemblies.

Its lightweight polyethylene foam construction makes it easy to handle, cut, and install during precast manufacturing or field construction.

Supplied in convenient rolls, EVERLASTIC® ECON-O-FOAM is particularly useful for projects requiring longer continuous lengths of joint filler, backing, or bond-breaking material.

Williams Products can also custom slit or cut ECON-O-FOAM to meet project-specific dimensions.

Key Features & Benefits

  • 1.8 LB Density: Lightweight polyethylene foam with a nominal density of 1.8 pounds per cubic foot.
  • Closed-Cell Polyethylene Construction: Provides a flexible cellular structure with useful resistance to moisture absorption.
  • Supplied in Rolls: Convenient for continuous joint applications and efficient installation.
  • Expansion Joint Filler: Provides a compressible material for properly designed concrete movement joints.
  • Inherent Bond-Breaking Properties: Polyethylene foam provides a physical separation layer that helps prevent unwanted adhesion.
  • Joint Backer Material: Can be used as backing in compatible sealant joint systems.
  • Flexible & Compressible: Accommodates movement and dimensional variations within appropriate joint designs.
  • Moisture Resistant: Closed-cell construction helps resist water absorption.
  • Easy to Cut & Install: Lightweight roll material can be cut to the required length.
  • Custom Fabrication: Available in slit rolls, strips, and project-specific configurations.

Typical Precast Concrete Applications

1. Precast Concrete Expansion Joint Filler

Expansion joints are incorporated into precast concrete structures to accommodate movement caused by temperature changes, shrinkage, and other service conditions.

EVERLASTIC® ECON-O-FOAM provides a compressible polyethylene foam filler for suitable expansion joint applications.

Typical applications include:

  • Precast concrete expansion joints
  • Concrete-to-concrete movement joints
  • Precast wall panel expansion joints
  • Concrete slab perimeter joints
  • Precast-to-cast-in-place concrete interfaces
  • Specialty precast expansion joint assemblies

The foam fills the designated joint space while allowing movement through compression.

Its roll format is particularly convenient for continuous joints and applications requiring longer lengths of material.

2. Joint Backer Material for Sealant Applications

Concrete joints frequently incorporate sealants to help protect the structure from moisture, debris, and environmental exposure.

Proper sealant installation requires appropriate joint geometry and backing material.

EVERLASTIC® ECON-O-FOAM can be used as a joint backing material in compatible sealant systems.

Potential applications include:

  • Precast concrete panel joints
  • Vertical concrete wall joints
  • Horizontal panel-to-panel joints
  • Concrete expansion joint sealant backing
  • Architectural precast joint systems
  • Specialty concrete sealing assemblies

The foam can help fill excess joint depth and establish the required space for sealant installation.

Its polyethylene surface can also serve as a bond-breaking interface in suitable joint systems, helping prevent undesirable three-sided sealant adhesion.

Important: Sealant compatibility, backing dimensions, installation compression, and joint design must be verified. Rectangular polyethylene foam backing is not automatically interchangeable with conventional round backer rod.

3. Bond Breaker Between Precast Concrete Components

Bond breakers are used in concrete construction to prevent unwanted adhesion between adjoining surfaces.

EVERLASTIC® ECON-O-FOAM provides a flexible polyethylene foam layer that can function as a physical bond breaker in properly designed assemblies.

Typical applications include:

  • Precast concrete panel interfaces
  • Concrete-to-concrete separation
  • Precast-to-cast-in-place concrete connections
  • Construction joint separation
  • Architectural precast assemblies
  • Specialty concrete isolation details

The foam creates a physical separation layer between surfaces that are not intended to bond.

Its roll format allows longer continuous sections to be installed with fewer material joints.

4. Precast Concrete Wall Panel Joints

Precast concrete wall panels frequently incorporate vertical and horizontal joints that require compressible fillers or backing materials.

EVERLASTIC® ECON-O-FOAM can be used in suitable applications involving:

  • Vertical precast wall panel joints
  • Horizontal panel-to-panel joints
  • Architectural precast concrete joints
  • Concrete façade movement joints
  • Precast panel perimeter joints
  • Specialty wall panel joint details

The material can serve as a joint filler, backing material, or bond-breaking component depending on the joint design.

5. Precast Concrete Isolation Joints

Isolation joints separate concrete components from adjoining structures to accommodate independent movement.

EVERLASTIC® ECON-O-FOAM provides a compressible separation material for appropriate isolation joint applications.

Typical uses include:

  • Concrete slab-to-wall isolation joints
  • Concrete-to-column isolation joints
  • Precast panel perimeter separation
  • Concrete-to-foundation interfaces
  • Concrete equipment enclosure separation
  • Specialty concrete isolation joints

The foam helps maintain separation between adjoining concrete components while allowing movement within the joint.

6. Precast Utility Vaults & Underground Structures

Precast utility vaults and underground concrete structures may require joint fillers, backing materials, and bond-breaking components.

Potential applications include:

  • Utility vault component separation
  • Precast enclosure joints
  • Concrete access structure interfaces
  • Specialty underground concrete joints
  • Joint backing for compatible sealant systems
  • Precast infrastructure assemblies

Where watertight joints are required, the complete joint sealing system must meet the applicable project requirements. ECON-O-FOAM is not a substitute for a specified waterstop or gasket.

7. Precast Concrete Highway & Infrastructure Construction

Highway and infrastructure construction frequently incorporates expansion joints, isolation joints, and concrete separation details.

EVERLASTIC® ECON-O-FOAM may be considered for:

  • Precast highway concrete expansion joints
  • Concrete pavement isolation joints
  • Precast drainage structure separation
  • Concrete-to-structure movement joints
  • Infrastructure joint backing
  • Specialty concrete bond-breaking applications

Its lightweight roll construction can make installation more convenient for projects involving continuous joints.

EVERLASTIC® ECON-O-FOAM as a Bond Breaker

Inherent Bond-Breaking Properties for Concrete Construction

Bond-breaking materials help prevent unwanted adhesion between adjoining surfaces that must remain separated or move independently.

EVERLASTIC® ECON-O-FOAM provides a flexible polyethylene foam separation layer with inherent bond-breaking characteristics.

Concrete-to-Concrete Bond Breaking

The material helps prevent direct bonding between adjoining concrete surfaces when installed as a continuous separation layer.

Precast-to-Cast-in-Place Separation

ECON-O-FOAM can be used at designated interfaces where precast concrete and cast-inplace concrete must remain separated.

Sealant Bond Breaking

When used as compatible joint backing, polyethylene foam can help prevent sealant adhesion to the back of the joint.

This supports proper sealant movement by helping avoid three-sided adhesion.

Expansion Joint Separation

The foam fills the joint space while maintaining separation between adjacent concrete elements.

Continuous Bond-Breaking Strips

Because ECON-O-FOAM is supplied in rolls, longer continuous sections can be installed with fewer material joints.

EVERLASTIC® ECON-O-FOAM as a Joint Backer Material

Supporting Proper Sealant Joint Design

Sealant joints must be designed to accommodate movement while maintaining the required sealant profile.

Backing materials are commonly installed behind sealants to control sealant depth and prevent unwanted adhesion to the bottom of the joint.

EVERLASTIC® ECON-O-FOAM can serve as a fabricated backing material where its dimensions, density, compression characteristics, and compatibility satisfy the sealant manufacturer’s requirements.

Benefits include:

  • Filling excess joint depth
  • Providing backing for compatible sealants
  • Helping establish the specified sealant profile
  • Creating a potential bond-breaking surface
  • Reducing unnecessary sealant consumption
  • Allowing continuous installation along longer joints
  • Providing an economical alternative for suitable joint configurations

For conventional narrow joints, round backer rod may be more appropriate. ECON-O-FOAM is particularly useful where flat or rectangular backing material is specified.

Advantages of Polyethylene Foam Supplied in Rolls

One of the primary advantages of EVERLASTIC® ECON-O-FOAM is its roll format.

Unlike polyethylene foam plank materials supplied in individual sheets, ECON-O-FOAM can provide longer continuous lengths for joint filling, backing, and separation.

Longer Continuous Lengths

Roll material can reduce the number of seams required in long concrete joints.

Efficient Installation

Installers can cut the required length directly from the roll.

Reduced Material Handling

Lightweight rolls are convenient to transport and position during precast manufacturing or field installation.

Reduced Cutting Waste

Material can be cut to the length required for each application.

Convenient Storage

Rolls provide an efficient way to store and handle flexible polyethylene foam material.

Custom Slitting

Williams Products can provide custom-width rolls or strips to meet project-specific requirements, subject to manufacturing capabilities and material availability.

EVERLASTIC® ECON-O-FOAM vs. EVERLASTIC® ISOVIBE

Williams Products offers both ECON-O-FOAM and ISOVIBE for precast concrete joint filling, backing, and bond-breaking applications.

While both products are polyethylene foam materials, they differ in density and supplied form.

Feature EVERLASTIC® ECON-O-FOAM EVERLASTIC® ISOVIBE

Material Polyethylene Foam Polyethylene Foam

Nominal Density 1.8 lb/ft³ 2.2 lb/ft³

Cell Structure Closed-Cell Closed-Cell

Supplied Form Rolls Plank Sheets

Expansion Joint Filler Yes, Where Specified Yes, Where Specified

Joint Backer Material Yes, Where Compatible Yes, Where Compatible

Bond Breaker Yes Yes

Continuous Joint Applications Convenient Roll Format Sheet Length Dependent

Custom Fabrication Yes Yes

EVERLASTIC® ECON-O-FOAM is particularly attractive for customers who prefer lightweight roll material for longer expansion joints, joint backing, and bond-breaking applications.

Material selection should be based on the required dimensions, compression properties, installation conditions, and project specifications rather than density alone.

Material Specifications

Property Specification

Product Name EVERLASTIC® ECON-O-FOAM

Material Polyethylene Foam

Material Form Roll

Nominal Density 1.8 lb/ft³

Approximate Metric
Density
29 kg/m³

Cell Structure Closed-Cell

Primary Functions
Expansion Joint Filler, Backer Material, Bond Breaker &
Separation

Available Forms Rolls & Custom-Fabricated Strips

Fabrication Options Slit Rolls, Strips & Specialty Shapes

Primary Market Precast Concrete Construction

Additional Markets Concrete, Masonry, Highway & Infrastructure Construction

Specific roll widths, thicknesses, roll lengths, compression-deflection properties, compression recovery, water absorption, and applicable ASTM requirements should be confirmed using the current EVERLASTIC® ECON-O-FOAM technical data sheet.

Custom Fabrication for Precast Concrete Manufacturers

Williams Products understands that precast concrete manufacturers require consistent dimensions, dependable materials, and products that can be incorporated into their manufacturing processes.

We offer EVERLASTIC® ECON-O-FOAM in roll form and custom-fabricated configurations, including:

  • Full polyethylene foam rolls
  • Custom-width slit rolls
  • Precut expansion joint filler strips
  • Joint backing strips
  • Bond-breaking material
  • Concrete isolation joint fillers
  • Project-specific widths and lengths
  • Specialty fabricated components
  • Production quantities for precast manufacturers

Our fabrication capabilities help reduce material preparation time while providing consistent dimensions for installation.

Whether you require full rolls for in-house fabrication or custom-width strips ready for use, Williams Products can assist with your requirements.

Material selection should be based on the applicable project plans, engineering requirements, load conditions, environmental exposure, and intended application. MIL-C882 and AASHTO references should be verified against the current project specification before material is supplied or installed.

Sectors

Information

Contact us

Need Everlastic® Econ-O-Foam?

Contact Williams Products for pricing, availability, specifications, and custom fabrication options.

Send us a message

"*" indicates required fields