Precast
Precast
EVERLASTIC® IG2 – ASTM D1056 2C2 Closed Cell Neoprene Sponge
PENNDOT Bulletin 15 Listed | Sections 1085.2(m)1 & 1107.02(p)
PENNDOT Bulletin 15 Listed Neoprene Sponge for Precast Concrete & Highway
Construction
Williams Products’ EVERLASTIC® IG2 is a high-performance closed cell neoprene sponge rubber meeting ASTM D1056 2C2 material requirements. Designed for applications requiring controlled compression, resilience, moisture resistance, and durability, IG2 provides a dependable solution for sealing, cushioning, and joint isolation in precast concrete construction.
EVERLASTIC® IG2 is supplied by Williams Products using material listed on the
Pennsylvania Department of Transportation (PENNDOT) Bulletin 15 under Sections
1085.2(m)1 and 1107.02(p). These listings make IG2 an important material option for precast manufacturers, bridge contractors, and highway construction projects requiring qualified neoprene joint materials.
From precast box culverts and bridge beams to highway sound walls and drainage structures, EVERLASTIC® IG2 provides reliable cushioning and separation in demanding construction environments.
Available in custom-cut strips, pads, sheets, and fabricated configurations, IG2 can be supplied to meet the dimensional requirements of precast manufacturers, contractors, and highway construction projects.
Key Features & Benefits
- PENNDOT Bulletin 15 Listed: Material listed under Sections 1085.2(m)1 and
1107.02(p) for applicable Pennsylvania transportation construction projects. - ASTM D1056 2C2 Classification: Type 2, Class C, Grade 2 closed cell neoprene sponge rubber.
- Closed Cell Construction: Helps resist moisture absorption and water penetration through the sponge material.
- Controlled Compressibility: Provides cushioning while accommodating dimensional variations and minor movement between precast components.
- Resilient Cushioning: Helps maintain separation between adjoining concrete and steel components.
- Oil Resistance: ASTM D1056 Type C classification provides oil-resistance requirements compared with Type A materials.
- Weather Resistance: Suitable for consideration in outdoor construction applications exposed to changing environmental conditions.
- Vibration & Contact Noise Reduction: Helps reduce vibration transmission and direct contact between adjoining concrete components.
- Custom Fabrication: Available in strips, pads, sheets, and specialty shapes to simplify installation and reduce material waste.
Typical Precast Concrete Applications
1. Precast Box Culverts & Highway Drainage Structures
Precast reinforced concrete box culverts are one of the primary applications for
EVERLASTIC® IG2, particularly on Pennsylvania highway projects requiring ASTM D1056 2C2 neoprene joint materials.
Precast culvert sections must accommodate manufacturing tolerances, installation variations, and movement while maintaining appropriate joint performance.
EVERLASTIC® IG2 provides a compressible neoprene sponge material for specified joint applications.
Common applications include:
- Compressible neoprene joint strips between precast box culvert sections
- Joint cushioning between adjoining concrete components
- Isolation strips at concrete contact points
- Compressible joint sealing components
- Joint fillers for precast drainage structures
- Separation material at specified precast interfaces
IG2’s closed cell construction helps limit moisture absorption, while its Grade 2 compression characteristics provide a balance of flexibility and resistance to compression.
PENNDOT Bulletin 15 – Section 1085.2(m)1
EVERLASTIC® IG2 material is listed under Section 1085.2(m)1 – Neoprene Joint Material for Precast Reinforced Concrete Box Culverts.
This listing identifies the material as ASTM D1056 Type 2, Class C, Grade 2, making it relevant to precast manufacturers supplying box culverts for applicable PENNDOT projects.
2. Prestressed Concrete Bridge Beams
Prestressed concrete bridge beams are an important part of highway and bridge infrastructure, and certain beam assemblies require compressible neoprene joint materials for cushioning and separation.
EVERLASTIC® IG2 can be supplied for specified applications involving prestressed concrete bridge components.
Typical applications include:
- Neoprene joint material for prestressed concrete beam assemblies
- Compressible strips at specified beam interfaces
- Cushioning between adjoining concrete components
- Nonstructural joint isolation
- Concrete-to-concrete separation
- Specialty fabricated neoprene sponge components
Its controlled compression characteristics help accommodate dimensional variations while providing a resilient separation layer.
PENNDOT Bulletin 15 – Section 1107.02(p)
EVERLASTIC® IG2 material is also listed under Section 1107.02(p) – Neoprene Joint
Material for Prestressed Concrete Bridge Beams.
This provides an additional qualified material application for Pennsylvania bridge construction projects requiring the specified neoprene sponge.
IG2 is a compressible sponge joint material and should not be substituted for a structural elastomeric bearing pad.
3. Precast Concrete Sound Walls
Precast concrete sound walls are widely used along highways and transportation corridors to reduce traffic noise in surrounding communities.
These structures frequently incorporate compressible sponge materials between adjoining concrete panels and supporting components.
EVERLASTIC® IG2 provides cushioning and isolation for suitable sound wall applications.
Typical applications include:
- Compressible sponge strips between precast sound wall panels
- Cushioning at panel-to-post interfaces
- Isolation between adjoining concrete components
- Concrete-to-steel contact cushioning
- Vibration and contact noise reduction
- Nonstructural joint protection
IG2’s compressibility helps accommodate dimensional variations between precast panels while providing a flexible separation layer.
Its closed cell structure helps limit moisture absorption in outdoor environments.
For PENNDOT sound wall projects, Williams Products can assist precast manufacturers and contractors in identifying the appropriate sponge dimensions and material specifications.
Bulletin 15 listing under Sections 1085.2(m)1 and 1107.02(p) does not independently establish approval for sound wall applications.
4. Precast Utility Vaults & Underground Structures
Precast utility vaults, electrical enclosures, telecommunications structures, and underground concrete assemblies frequently require compressible materials for cushioning and joint isolation.
EVERLASTIC® IG2 can be considered for:
- Utility vault section joints
- Concrete lid and cover cushioning
- Access panel isolation
- Non-pressure-rated gasket applications
- Isolation strips between precast components
- Concrete-to-steel contact cushioning
Its closed cell construction helps resist moisture absorption, while its controlled compression characteristics allow it to conform to variations in adjoining surfaces.
For joints requiring a watertight or pressure-rated seal, the complete joint design and sealing material must be evaluated separately.
5. Precast Highway Barriers & Transportation Structures
Precast highway barriers and transportation infrastructure components often require compressible materials for cushioning, separation, and isolation.
EVERLASTIC® IG2 may be considered for:
- Precast concrete barrier assemblies
- Highway median barrier components
- Concrete-to-steel contact locations
- Nonstructural isolation strips
- Cushioning between adjoining concrete elements
- Specialty transportation infrastructure components
Its ASTM D1056 2C2 classification provides a combination of moderate compression resistance and oil-resistance characteristics.
For DOT projects, material selection should be based on the applicable specifications and approved product requirements.
6. Precast Concrete Wall Panels
Precast concrete wall panels require cushioning and isolation materials to accommodate manufacturing tolerances, installation variations, and minor movement between components.
EVERLASTIC® IG2 provides a flexible, compressible barrier between adjoining panels.
Typical applications include:
- Vertical and horizontal panel joints
- Compressible isolation strips
- Perimeter cushioning around precast panels
- Separation material between adjoining concrete elements
- Concrete-to-steel contact cushioning
- Nonstructural joint protection
Its Grade 2 compression characteristics provide greater resistance to compression than softer Grade 1 sponge materials while retaining flexibility.
7. Precast Wastewater Treatment & Industrial Concrete Structures
Precast wastewater treatment facilities and industrial concrete structures frequently incorporate compressible materials for cushioning, isolation, and nonstructural joint protection.
EVERLASTIC® IG2 may be considered for applications where controlled compression and moisture resistance are required.
Typical applications include:
- Precast wastewater treatment structures
- Industrial utility vaults
- Concrete equipment enclosures
- Compressible isolation strips
- Concrete-to-metal cushioning
- Non-pressure-rated access cover gaskets
- Secondary joint sealing components
Its ASTM D1056 Type C classification provides oil-resistance characteristics that may be beneficial in industrial applications.
For applications involving oils, chemicals, or aggressive wastewater constituents, material compatibility should be verified before use.
PENNDOT Bulletin 15 – Qualified Neoprene Joint Material
EVERLASTIC® IG2 is supplied using neoprene sponge material listed on PENNDOT Bulletin 15 (Publication 35) under two separate construction specifications.
PENNDOT Bulletin 15 Listing Information
PENNDOT Section Material Description Application
1085.2(m)1 Neoprene Joint Material Precast Reinforced Concrete Box Culverts
1107.02(p) Neoprene Joint Material Prestressed Concrete Bridge Beams
Material Classification: ASTM D1056 Type 2, Class C, Grade 2 (2C2)
PENNDOT Listing Reference Numbers:
- Section 1085.2(m)1 – 2019-159Q
- Section 1107.02(p) – 2020-269Q
The underlying material is identified in the PENNDOT listing under its manufacturer’s designation. Williams Products supplies fabricated EVERLASTIC® IG2 products using this listed material.
Benefits for Precast Manufacturers & Highway Contractors
- Qualified Material Selection: Provides a listed material option for applicable
PENNDOT box culvert and bridge beam construction requirements. - Specification Compliance: Helps manufacturers source ASTM D1056 2C2 neoprene sponge for projects requiring the applicable Bulletin 15 material.
- Simplified Purchasing: Provides precast manufacturers and contractors with a source for custom-fabricated neoprene joint material.
- Pennsylvania Infrastructure Applications: Supports procurement for specified highway, bridge, and precast concrete projects.
- Custom Fabrication: Williams Products can supply material in project-specific dimensions to simplify installation and production.
Important: PENNDOT Bulletin 15 listing applies only to the product’s approved uses and conditions. Current listing status, approved manufacturer, project specifications, and fabrication requirements should be verified before installation.
Why ASTM D1056 2C2 Closed Cell Neoprene Sponge Is Important in Precast Construction
Precast concrete components are manufactured under controlled conditions, but field installation introduces dimensional tolerances, uneven contact surfaces, temperature changes, and structural movement.
Without appropriate cushioning or isolation materials, adjoining concrete components may experience concentrated contact, unwanted vibration, or premature joint deterioration.
EVERLASTIC® IG2 helps address these challenges by providing a flexible, resilient, compressible layer between components.
Its ASTM D1056 2C2 classification combines Grade 2 compression characteristics with Type C oil-resistance requirements.
This makes IG2 a valuable material option for applications where controlled compression, resilience, and moisture resistance are important.
The material’s closed cell construction provides a combination of cushioning and environmental durability for demanding precast concrete applications.
Material Specifications
Property Specification
Product Name EVERLASTIC® IG2
Material Closed Cell Neoprene Sponge Rubber
ASTM Classification ASTM D1056 2C2
Material Classification Type 2, Class C, Grade 2
Cell Structure Closed Cell
Compression Characteristics Medium-Soft
Compression-Deflection
Classification
ASTM D1056 Grade 2
Oil Resistance Classification ASTM D1056 Type C
PENNDOT Status Bulletin 15 Listed Material
PENNDOT Section 1085.2(m)1
PENNDOT Section 1107.02(p)
Available Forms Sheets, Strips, Pads & Custom Gaskets
Fabrication Custom Die-Cutting, Slitting & Cutting
Primary Markets
Precast Concrete, Highway, Bridge, Sound Walls &
Infrastructure Construction
Specific physical properties, compression-deflection values, tolerances, and test results should be confirmed using the current IG2 technical data sheet. Bulletin 15 listing details and approved applications should be verified using the current PENNDOT publication.
Custom Fabrication for Precast Manufacturers
At Williams Products, we understand that precast concrete manufacturers require consistent dimensions, dependable materials, and products that are ready for installation.
We offer EVERLASTIC® IG2 in a variety of fabricated configurations, including:
- Custom-width sponge strips
- Continuous-length cushioning and isolation strips
- Die-cut gaskets
- Custom-sized isolation pads
- Sheet material
- Specialty shapes for precast assemblies
Our fabrication capabilities help precast manufacturers minimize cutting and preparation time while maintaining consistency throughout production.
Whether you require material for a specialized project or production quantities for ongoing precast manufacturing, Williams Products can assist with your requirements.
Product selection should be based on project requirements, design conditions, environmental exposure, and applicable project specifications. ASTM D1056 classification does not by itself indicate suitability for every application.
Sectors
Information
Tech data/spec sheet
Safety data sheet
Cut sheet
Contact us
Need EVERLASTIC® IG2 for Your Project?
Williams Products provides quality cellular rubber materials and custom fabrication for concrete and construction applications. Contact us for pricing, availability, and custom fabrication options.
Send us a message
"*" indicates required fields